呼和浩特市降水化学特征分析

对2006年呼和浩特市降水离子监测资料进行分析,结果表明:降水呈碱性,季节分布明显,夏季降水集中且pH值为全年最低,冬季降水量少,pH值较高;SO42-离子为主要致酸离子,阳离子中Ca2+,Mg2+离子的浓度很高;降水中主要成分之间相关性显著,Ca2+的中和作用较强;降水气团的后向轨迹分析表明蒙古国的沙漠地区是呼和浩特冬春季碱性降水的主要来源,夏季较低的pH值降水则部分源于我国的华中、华北地区的酸性污染物中长距离输送。     

基于GIS技术的甘肃省气温空间分布特征

利用40 a气象站气温观测数据,结合GIS技术,建立甘肃省气温空间化模型,以高分辨率的DEM作为模型的输入参数实现气温数据的空间化,同时与传统的气温内插方法 (反距离加权法(IDW)、克里格(Kriging)、协同克里格(Co-Kriging))的插值结果进行比较分析,结果反映利用多元回归分析+克里格方法建立的气温数据栅格化结果较好,比传统的气温内插方法插值精度高,插值结果很好的再现了原始测量结果。     

Comparison of manual and automatic methods for measurement of methane emission from rice paddy fields

The methane emission flux from rice paddies was simultaneously measured with automatic and manual methods in the suburban of Suzhou. Both methods were based on the static chamber/ GC-FID techniques. Detail analysis of the experimental results indicates: a) The data of methane emission measured with the automatic method is reliable. b) About 11 or 19 o’clock of local time is recommended as the optimum sampling time for the manual spot measurement of methane emission from rice paddies. The methane emission fluxes measured by manual sampling at local time other than the optimum time have to be corrected. The correction coefficient may be determined by automatic and continuous measurement. c) In order to get a more accurate result, an empirical correction factor, such as 18%, is recommended to correct the seasonally total amount of measured methane emission by enlarging the au-tomatically measured data or reducing the manually measured ones.     

2014年4月大气环流和天气分析

2014年4月大气环流特征为,北半球极涡呈单极型分布,中心位于喀拉海北端附近;亚洲大陆东部高压脊强度偏强,导致4月我国气温较常年同期(11.0℃)偏高1.1℃,为1961年同期以来第五高值。东亚大槽强度和位置、南支系统和西北太平洋副热带高压接近常年平均状况。4月全国平均降水量为43.7 mm,比常年同期略偏少。月内,江南南部和华南等地出现短时强降水、雷雨大风等强对流天气;北方地区出现多次沙尘天气过程;此外,部分站次出现极端高温、极端降温事件。     

WRF_Lake湖气模式对我国太湖的湖温模拟应用评估

文章把一维热扩散湖模式成功地耦合到中尺度天气研究和预报模式WRF3.2中,建立了湖气耦合模式。并用太湖区梅梁湾获得的2010年8月11—28日的观测资料对该耦合模式模拟湖温的能力进行了初步评估。设计了3组方案进行对照试验,分别为:(1)没有加入湖模块的WRF模式试验(WRF);(2)没有对参数进行优化的原始耦合模式试验(WRF_Lake_Old);(3)对3个参数进行优化后的耦合模式试验(WRF_Lake_New)。结果表明耦合了湖泊模块并且参数优化后的湖气耦合模式(WRF_Lake_New)比没有包含湖面方案的WRF模式对太湖水温的模拟能力有了很大的改进。WRF_Lake_New能够合理地模拟出太湖梅梁湾上湖表温度的日变化,模拟的湖表温度误差范围平均在±1℃左右,模拟的空气温度平均误差范围在±0.5℃以内,模拟的感、潜热通量也与观测更为接近。该耦合模式在太湖的初步评估结果表明,该湖气耦合模式为下一步研究湖泊过程和湖气相互作用提供了重要的工具。     

基于多雷达三维插值格点强冰雹诊断因子的强冰雹识别方法

为解决单部雷达强冰雹识别产品在雷达的探测范围、雷达的静锥区以及与基于格点的近风暴环境因子的融合上存在局限性的问题,本文建立了雷达反射率因子的三维局部空间插值及多部雷达拼图方法;类似于SCIT算法的风暴单体的VIL及SHI等冰雹识别参数的计算,基于多部雷达三维插值拼图数据集,实现了格点VIL、SHI、POH和POSH等算法,建立了基于三维格点的多部雷达强冰雹识别参数因子、风暴数值模拟的近风暴环境因子(0°层及-20°层高度)为识别参数的冰雹识别算法。为确定适合于贵州地区的冰雹识别阈值,使用贵州504个防雹炮点的冰雹观测资料及贵州2005年和2006年8次贵阳、遵义雷达站冰雹个例观测资料,建立了冰雹算法校验数据库;通过对降雹校验数据库的统计分析,建立了适于贵州地区VOD与冻结层高度统计关系式,确立了VIL密度产品的强冰雹判别阈值,并通过对WTSM的调整,改进了原来的POSH算法,在贵州西北部到中部一线的一次强冰雹过程中对强降雹区的识别效果较好。     

利用地震噪声准实时监测短周期面波波速变化

依据由噪声信号提取面波格林函数的原理,利用福建省地震台网25个宽频带台站2007年7月2日—8月29日的脉动观测资料,得到了瑞雷波群速度在福建地区的分布,并将该结果作为下一步相对变化动态成像的背景速度分布．分布结果表明,福建地区周期为3—5s的瑞雷波群速度大致在2.9—3.1km/s之间,平均速度为3.0km/s,瑞雷波群速度分布呈北高南低的现象,这与福建地区北部多山、南部多平原盆地的地理环境有很好的吻合．而且,该群速度分布图在漳州盆地地区表现出一个非常明显的低速,这主要是因为受到盆地沉积层的影响．通过滑动窗（窗长为20d,步长1d）技术得到了观测区内周期约为3-5s的瑞雷波波速分布变化的连续图像;再利用扣除背景影响的技术,得到了2007年8月14日—2008年7月1日福建地区瑞雷波波速的相对变化时空动态图像．通过分析相对变化时空动态图像与该时间范围内发生的地震的对应关系,表明福建地区瑞雷波波速在多次网内中等强度的地震或震群（ML＞3.0）中均表现出震前波速升高,震后下降恢复的变化趋势．初步分析认为,这可能与震前整个地区受到的应力增大震后应力得到释放所导致的介质变化有关．      

萨拉乌苏河流域萨拉乌苏组砂丘砂沉积特征

The Salawusu Formation of Milanggouwan section in Salawusu River Valley includes 7 layers of paleo-mobile dune sands, and 4 layers of paleo-fixed and semi-fixed dune sands. Their structures have been observed and their grain size, surface textural features and several main chemical elements have been analyzed. The results showed that： 1） Some of the aeolian structural characteristics of these dune sands are similar to that of the recent dune sands. 2） They are also similar to the recent dune sands in grain size components, and parameters of Mz,σ, Sk and Kg, as well as in several main chemical components. 3） The scattergrams of Mz-σ and SiO2-Al2O3＋TOFE and the probability curves of grain size showed that these paleo-dune sands are different from paleosols and fluvio-lacustrine facies, but are consistency with recent dune sands. 4） Quartz sands have well roundness and surface textural features such as dish-shaped pits, crescent-shaped pits, pockmarked pits, upturned cleavage plates, siliceous precipitates and siliceous crevasses, indicating that they had been carried for a long time by the wind. As the 11 layers of paleo-dune sands possess the aeolian characteristics in structure, grain size, surface textural features and chemical elements, the origin of their formation should be attributed to eolation.     

Titanium Isotope Analysis of Igneous Reference Materials using a Double-spike MC-ICP-MS Method

Ti separation was achieved by ion-exchange chromatography using Bio-Rad AG 1-X8 anion-exchange and DGA resins. For high-Fe/Ti and high-Mg/Ti igneous samples, a three-column procedure was required, whereas a two-column procedure was used for low-Fe/Ti and low-Mg/Ti igneous samples. The Ti isotopes were analysed by MC-ICP-MS, and instrumental mass bias was corrected using a 47Ti-49Ti double-spike technique. The 47Ti-49Ti double-spike and SRM 3162a were calibrated using SRM 979-Cr, certificated value 53Cr/52Crtrue = 0.11339. Isobaric interference was evaluated by analysing Alfa-Ti doped with Na, Mg, Ca, and Mo, and results indicate that high concentrations of Na and Mg have no significant effect on Ti isotope analyses; however, Ca and Mo interferences lead to erroneous δ49/47Ti values when Ca/Ti and Mo/Ti ratios exceed 0.01 and 0.1, respectively. Titanium isotopic compositions were determined for 12 igneous reference materials, BCR-2, BHVO-2, GBW07105, AGV-1, AGV-2, W-2, GBW07123, GBW07126, GBW07127, GBW07101, JP-1, and DTS-2b. Samples yield δ49/47Ti (‰) of ?0.035 ± 0.022, ?0.038 ± 0.031, 0.031 ± 0.022, 0.059 ± 0.038, 0.044 ± 0.037, 0.000 ± 0.015, 0.154 ± 0.044, ?0.044 ± 0.018, 0.010 ± 0.022, 0.064 ± 0.043, 0.169 ± 0.034, and ?0.047 ± 0.025 (relative to OL-Ti, ±2SD), respectively; of which isotopic compositions of DTS-2b, JP-1, GBW07101, GBW07105, GBW07123, GBW07126, and GBW07127 are reported for the first time. Standard Alfa-Ti was analysed repeatedly over a ten-month period, indicating a reproducibility of ±0.047 (2SD) for δ49/47Ti, similar to the precisions obtained for geochemical reference materials.