Hubble Space Telescope-WFPC2/Hα Observations of the Ejected Nebula M1-67

We present HST-WFPC2/Hα deep images of the ejected nebula M1-67. Our data suggest that M1-67 is the imprint of a previous, slow LBV wind ejected from the central star WR124, now a WN8 star. We find evidence that the LBV wind is highly variableand anisotropic. Some dense, persisting clumps have possibly been ejected directly from the stellar surface. This revised version was published online in July 2006 with corrections to the Cover Date.     

Ground-Based Observations of the Martian Atmosphere in Support of Space Missions

Although Mars is a favored target for planetary exploration, there is still a need for complementary ground-based observing programs of the Martian atmosphere, and this need will remain in the future. Indeed, as the atmosphere is very tenuous (less than 0.01 bar at the surface), the lines are very narrow and a high spectral resolving power (above 10⁴) is required over large spectral intervals. In addition, ground-based observations of Mars allow the instantaneous mapping of the whole planet, and thus the study of diurnal effects, which cannot be achieved from an orbiter. Recent ground-based achievements about the Martian atmospheric science include the first detection of H₂O₂ in the submillimeter range, the measurement of winds from CO millimetric transitions, the first detection of CH₄ and the O₃, H₂O₂, H₂O, and CH₄ mapping in the infrared. With an ELT, it will be possible to study at high spatial resolution transient atmospheric phenomena and to search for traces of minor constituents with unprecedented sensitivity. With ALMA, it will be also possible to search for minor species and to map the mesospheric winds for better constraining the climate models.     

Methane release and the carbon cycle on Mars

It has been suggested that the present release rate of methane to the Martian atmosphere could be the result of serpentinization in the deep subsurface, followed by the conversion of H₂ to CH₄ in a CO₂-rich fluid. Making this assumption, we show that the cryosphere could act as a buffer storing, under the form of micron-size methane clathrate particles, the methane delivered from below by hydrothermal fluids and progressively releasing it to the atmosphere at the top. From an extrapolation of the present CH₄ release rate back to the past, we calculate that up to several hundred millibars (～200–2000 mbar) of CO₂, resulting from the oxidation of the released CH₄, in addition to the volcanic supply (～400 mbar), should have accumulated in the atmosphere in the absence of a CO₂ sink. We reassess the capability of escape to have removed CO₂ from the atmosphere by C non-thermal escape and show that it is not significant. We suggest that atmospheric carbon is recycled to the crust through an active subsurface hydrological system, and precipitates as carbonates within the crust. During episodic periods of magmatic activity, these carbonates are decomposed to CO₂ dissolved in running water, and CO₂ can react with H₂ formed by serpentinization to build CH₄. CH₄ is then buffered in the subsurface cryosphere, above the water table, and finally released to the atmosphere, before being recycled to the subsurface hydrological system, and converted back to carbonates. We propose a typical evolution curve of the CO₂ pressure since the late Noachian based on our hypothesis. Contrary to the steady state carbon cycle at work on Earth, a progressive damping of the carbon cycle occurs on Mars due to the absence of plate tectonics and the progressive cooling of the planet.     

Estimating average shock pressures recorded by impactite samples based on universal stage investigations of planar deformation features in quartz—Sources of error and recommendations

Planar deformation features (PDFs) in quartz are the most widely used indicator of shock metamorphism in terrestrial rocks. They can also be used for estimating average shock pressures that quartz-bearing rocks have been subjected to. Here we report on a number of observations and problems that we have encountered when performing universal stage measurements and crystallographically indexing of PDF orientations in quartz. These include a comparison between manual and automated methods of indexing PDFs, an evaluation of the new stereographic projection template, and observations regarding the PDF statistics related to the c-axis position and rhombohedral plane symmetry. We further discuss the implications that our findings have for shock barometry studies. Our study shows that the currently used stereographic projection template for indexing PDFs in quartz might induce an overestimation of rhombohedral planes with low Miller–Bravais indices. We suggest, based on a comparison of different shock barometry methods, that a unified method of assigning shock pressures to samples based on PDFs in quartz is necessary to allow comparison of data sets. This method needs to take into account not only the average number of PDF sets/grain but also the number of high Miller–Bravais index planes, both of which are important factors according to our study. Finally, we present a suggestion for such a method (which is valid for nonporous quartz-bearing rock types), which consists of assigning quartz grains into types (A–E) based on the PDF orientation pattern, and then calculation of a mean shock pressure for each sample.     

A procedure for modelling asymptotic g‐mode pulsators: The case of γ Doradus stars

Mode identification is one of the first and main problems we encounter in trying to develop the complete potential of asteroseismology. In the particular case of g‐mode pulsators, this is still an unsolved problem, from both the observational and theoretical points of view. Nevertheless, in recent years, some observational and theoretical efforts have been made to find a solution. In this work we use the latest theoretical and computational tools to understand asymptotic g‐mode pulsators: 1) the Frequency Ratio Method, and 2) Time Dependent Convection. With these tools, a self‐consistent procedure for mode identification and modelling of these g‐mode pulsators can be constructed. This procedure is illustrated using observational information available for the γ Doradus star 9Aurigae. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Luciola hypertelescope space observatory: versatile, upgradable high-resolution imaging, from stars to deep-field cosmology

Luciola is a large (1 km) “multi-aperture densified-pupil imaging interferometer”, or “hypertelescope” employing many small apertures, rather than a few large ones, for obtaining direct snapshot images with a high information content. A diluted collector mirror, deployed in space as a flotilla of small mirrors, focuses a sky image which is exploited by several beam-combiner spaceships. Each contains a “pupil densifier” micro-lens array to avoid the diffractive spread and image attenuation caused by the small sub-apertures. The elucidation of hypertelescope imaging properties during the last decade has shown that many small apertures tend to be far more efficient, regarding the science yield, than a few large ones providing a comparable collecting area. For similar underlying physical reasons, radio-astronomy has also evolved in the direction of many-antenna systems such as the proposed Low Frequency Array having “hundreds of thousands of individual receivers”. With its high limiting magnitude, reaching the m _v?=?30 limit of HST when 100 collectors of 25 cm will match its collecting area, high-resolution direct imaging in multiple channels, broad spectral coverage from the 1,200 Å ultra-violet to the 20 μm infra-red, apodization, coronagraphic and spectroscopic capabilities, the proposed hypertelescope observatory addresses very broad and innovative science covering different areas of ESA’s Cosmic Vision program. In the initial phase, a focal spacecraft covering the UV to near IR spectral range of EMCCD photon-counting cameras (currently 200 to 1,000 nm), will image details on the surface of many stars, as well as their environment, including multiple stars and clusters. Spectra will be obtained for each resel. It will also image neutron star, black-hole and micro-quasar candidates, as well as active galactic nuclei, quasars, gravitational lenses, and other Cosmic Vision targets observable with the initial modest crowding limit. With subsequent upgrade missions, the spectral coverage can be extended from 120 nm to 20 μm, using four detectors carried by two to four focal spacecraft. The number of collector mirrors in the flotilla can also be increased from 12 to 100 and possibly 1,000. The imaging and spectroscopy of habitable exoplanets in the mid infra-red then becomes feasible once the collecting area reaches 6 m², using a specialized mid infra-red focal spacecraft. Calculations (Boccaletti et al., Icarus 145, 628–636, 2000) have shown that hypertelescope coronagraphy has unequalled sensitivity for detecting, at mid infra-red wavelengths, faint exoplanets within the exo-zodiacal glare. Later upgrades will enable the more difficult imaging and spectroscopy of these faint objects at visible wavelengths, using refined techniques of adaptive coronagraphy (Labeyrie and Le Coroller 2004). Together, the infra-red and visible spectral data carry rich information on the possible presence of life. The close environment of the central black-hole in the Milky Way will be imageable with unprecedented detail in the near infra-red. Cosmological imaging of remote galaxies at the limit of the known universe is also expected, from the ultra-violet to the near infra-red, following the first upgrade, and with greatly increasing sensitivity through successive upgrades. These areas will indeed greatly benefit from the upgrades, in terms of dynamic range, limiting complexity of the objects to be imaged, size of the elementary “Direct Imaging Field”, and limiting magnitude, approaching that of an 8-m space telescope when 1,000 apertures of 25 cm are installed. Similar gains will occur for addressing fundamental problems in physics and cosmology, particularly when observing neutron stars and black holes, single or binary, including the giant black holes, with accretion disks and jets, in active galactic nuclei beyond the Milky Way. Gravitational lensing and micro-lensing patterns, including time-variable patterns and perhaps millisecond lensing flashes which may be beamed by diffraction from sub-stellar masses at sub-parsec distances (Labeyrie, Astron Astrophys 284, 689, 1994), will also be observable initially in the favourable cases, and upgrades will greatly improve the number of observable objects. The observability of gravitational waves emitted by binary lensing masses, in the form of modulated lensing patterns, is a debated issue (Ragazzoni et al., MNRAS 345, 100–110, 2003) but will also become addressable observationally. The technology readiness of Luciola approaches levels where low-orbit testing and stepwise implementation will become feasible in the 2015–2025 time frame. For the following decades beyond 2020, once accurate formation flying techniques will be mastered, much larger hypertelescopes such as the proposed 100 km Exo-Earth Imager and the 100,000 km Neutron Star Imager should also become feasible. Luciola is therefore also seen as a precursor toward such very powerful instruments.     

The DynaMICCS perspective

The DynaMICCS mission is designed to probe and understand the dynamics of crucial regions of the Sun that determine solar variability, including the previously unexplored inner core, the radiative/convective zone interface layers, the photosphere/chromosphere layers and the low corona. The mission delivers data and knowledge that no other known mission provides for understanding space weather and space climate and for advancing stellar physics (internal dynamics) and fundamental physics (neutrino properties, atomic physics, gravitational moments...). The science objectives are achieved using Doppler and magnetic measurements of the solar surface, helioseismic and coronographic measurements, solar irradiance at different wavelengths and in-situ measurements of plasma/energetic particles/magnetic fields. The DynaMICCS payload uses an original concept studied by Thalès Alenia Space in the framework of the CNES call for formation flying missions: an external occultation of the solar light is obtained by putting an occulter spacecraft 150 m (or more) in front of a second spacecraft. The occulter spacecraft, a LEO platform of the mini sat class, e.g. PROTEUS, type carries the helioseismic and irradiance instruments and the formation flying technologies. The latter spacecraft of the same type carries a visible and infrared coronagraph for a unique observation of the solar corona and instrumentation for the study of the solar wind and imagers. This mission must guarantee long (one 11-year solar cycle) and continuous observations (duty cycle > 94%) of signals that can be very weak (the gravity mode detection supposes the measurement of velocity smaller than 1 mm/s). This assumes no interruption in observation and very stable thermal conditions. The preferred orbit therefore is the L1 orbit, which fits these requirements very well and is also an attractive environment for the spacecraft due to its low radiation and low perturbation (solar pressure) environment. This mission is secured by instrumental R and D activities during the present and coming years. Some prototypes of different instruments are already built (GOLFNG, SDM) and the performances will be checked before launch on the ground or in space through planned missions of CNES and PROBA ESA missions (PICARD, LYRA, maybe ASPIICS).     

Determination of crystallization temperatures in fractional crystallization series by nickel partitioning equations

Four high-quality seismic refraction profiles were recorded parallel to the structural grain in the Cuvier Basin and adjacent Wharton Basin to study the nature of the earth's crust in this area. The principal result of this experiment is that this area is generally floored with oceanic crust. No transitional velocity structure exists at the base of the continental slope. Departures from a standard oceanic crustal section are observed on an intermediate profile that are attributed to structural complications on the flank of an abandoned spreading ridge. Additional magnetic anomaly profiles in the eastern Cuvier Basin are used to correlate the lineations in that area with Early Cretaceous reversals M-5 to M-10. This correlation dates the onset of plate separation at 120–125 m.y., essentially contemporaneous with the opening of the Perth Basin to the south. However, it leaves a 220-km gap between M-4 and M-5 in the Cuvier Basin that suggests a ridge jump of that magnitude occurred nominally at 118 m.y. Early Cretaceous magnetic lineations northwest of the Exmouth Plateau suggest that spreading at the seaward edge of the Exmouth Plateau began 120 m.y. ago, while Late Jurassic marine sediments and fault structures landward of the Exmouth Plateau suggest rifting in that area at 155 m.y.     

Infrared study of the pyrolysis products of sporopollenin and lignite

The effect of pyrolysis at increasing temperature on sporopollenin, lignite and sporopollenin oxidized at 200°C has been investigated using measured infrared band absorption coefficients.Oxidation of sporopollenin in air at 200°C is marked by a decrease in the content of saturated hydrocarbon chains and a strong increase in the concentration of carboxylic acid groups.Pyrolysis of a thick bed of sporopollenin at increasing temperatures leads to the removal of a large proportion of oxygenated functions, before the removal of hydrocarbons. For lignite and oxidized sporopollenin, the loss of both types of functional groups extends over a broader temperature range. Reorganization of the carbonaceous residue at high temperature is hindered if a sufficiently low content of oxygenated functions, carbonyl and carboxyl as well as hydroxyl and ether groups, is not reached before the elimination of hydrocarbons.