华北地区石炭－二叠系煤系地层和轻质油关系研究

对华北地区石炭－二叠系、下第三系、中上元古界沉积物和油样的低环萜烷参数用因子分析方法进行油源对比，表明石炭－二叠系部分样品与该区轻质油的关系密切。进一步分析这套地层的有机地球化学特征后，提出壳质组含量和成熟度是决定石炭－二叠系能否生成轻质油的主要因素，并提出该区煤系地层生成轻质油的成熟度下限是镜质组反射率Ｒ０为１．１％。     

Assessment of Heavy Metal Contamination of Wetland Soils from a Typical Aquatic–Terrestrial Ecotone in Haihe River Basin,North China

Surface soils were collected in the aquatic–terrestrial ecotone (ATE) of Yongnianwa wetland, downstream of Haihe River basin of North China in June of 2007. Samples were subjected to a total digestion technique before they were analyzed for total concentrations of Cr, Cu, Ni, Pb, and Zn to investigate their pollution levels in the ATE. The contamination index, integrated contamination index, geoaccumulation index, toxic units, and sum of toxic units were adopted to assess the heavy metal contamination levels and ecotoxicity, respectively. The results showed all the selected element concentrations in upland soils of the ecotone were relatively higher than those in the lowland soils. No Cr pollution was observed in all soil samples, but almost all samples were slightly polluted by Cu, Ni, Pb, and Zn except for Site 1. The contamination indexes and geoaccumulation indexes consistently presented no contamination for Site 1 and slight contamination for other sites. The ΣTUs increased from lowland to upland, but the whole level of toxicity in this ecotone was relatively low.     

新疆苇湖梁煤矿塌陷区遥感监测研究

苇湖梁煤矿已有50多年的开采历史, 长期的地下开采造成了严重的地面塌陷。本文将新疆苇湖梁煤矿塌陷区作为研究区, 以2013年的IKONOS高分遥感影像为主要数据源, 以ArcGIS为支撑平台, 采用人机交互的解译方法对塌陷区的相关信息进行提取, 结合实地调查验证的方法, 分析研究区内地质灾害的特征。通过遥感调查发现: 研究区内发育规模较大、位于塌陷区周围的拉伸区的地裂缝约有64条;塌陷坑(群)约有94个, 主要分布于南北塌陷槽及两侧;塌陷回填区总面积达0.92 km², 并在回填区发现了3个新塌陷坑。本文充分发挥了遥感技术宏观性强、速度快的特点, 调查结果反映了塌陷区灾害的实际情况。     

采用基础摩擦隔震房屋高宽比限值的研究

大量的试验结果和地震经验表明，采用基础隔震方法能有效地提高建筑物的抗震能力，但建筑物的高度在什么范围，即建筑物的高宽比在什么范围内才适合采用这种方法，仍然是一个有待解决的课题。本文对采用基础滑移隔震多层砌体房屋在实际地震作用下的抗倾覆高宽比限值进行了研究，利用Ｗｉｌｓｏｎ－θ数值积分方法计算，得到了多层砌体房屋的高宽比限值的统计值。其数值结果可供编制建筑隔震设计规程参考。     

Zircon U–Pb ages and O–Nd isotopic composition of basement rocks in the North Qinling Terrain, central China: evidence for provenance and evolution

The Qinling Group was previously interpreted as the oldest Precambrian basement unit of the North Qinling Terrain, recording its formation and early crustal evolution. The Qinling Group consists predominantly of gneisses, amphibolites, and marbles, which underwent multi-phase deformation and metamorphism. In order to better constrain the provenance and tectonic setting of this group and the evolution of the North Qinling orogenic belt, in situ U–Pb dating and oxygen isotopic analysis of zircons in combination with whole-rock geochemistry and Sr–Nd isotope analysis was performed on the two dominant rock types, amphibolite and felsic gneiss. Felsic gneisses exhibit enrichment of LREEs and LILEs (Rb, Ba, Th, K, Pb), negative Eu anomalies and depletion of HFSEs (Nb, Ta, P, Ti). The rocks have slightly elevated δ¹⁸O values (6.5–9.3 ‰) and initial ε _Nd values of ?4.6 corresponding to two-stage Nd model age of 1.99 Ga. Amphibolites are also enriched in LILEs and LREEs and depleted in Nb and Ta and have homogeneous δ¹⁸O values (5.0–6.0 ‰), but higher initial ε _Nd values (2.8–3.3) and younger two-stage Nd model ages (1.29–1.24 Ga) compared to the gneisses. The zircon age record indicates that the gneisses and amphibolites were formed in a ~960 Ma volcanic arc environment rather than in a rift setting as previously suggested. A major metamorphic event took place during the Early Paleozoic. Based on the age spectrum of detrital zircons, the Qinling Group is interpreted as an autonomous geological unit, which was mainly derived mostly from 1,000 to 900 Ma old granitoid rocks. The North Qinling Terrain can be regarded as a remnant of the Grenville orogenic belt with an early Neoproterozoic evolution different from that of the North and South China blocks.     

大直径硬岩环状取芯钻具的试验研究

在分析了国内外大直径基岩孔钻进取芯方法的基础上,提出了一套低能耗、高效率、低造价的大直径硬岩环状取芯钻具,设计制作了样机,并进行了样机试验.试验结果表明:该设计方案、工艺可行,达到了预期设计目标,为大直径硬岩取芯施工提供了一种新的机具.     

Effect of flying altitude and pulse repetition frequency on laser scanner penetration rate for digital elevation model generation in a tropical forest

In tropical forests, the penetration ability of airborne laser scanning (ALS) may be limited because of highly dense vegetation cover. However, in the typical planning of ALS surveys, the ability of laser pulses to penetrate forests is not considered. Nine round-trip flight lines covering the area of a tropical forest on the northeast side of the Tsengwen Reservoir in Taiwan were designed in this study. Five flight lines flew at altitudes of 1.525, 1.830, 2.135, 2.440, and 2.745 km, and the other four had pulse repetition frequencies (PRFs) of 100, 150, 200, and 250 kHz. The laser penetration index (LPI) is a quantitative index measuring the penetration ability of the ALS and consists of the ratio of the number of laser pulses reaching the forest floor to the total number of laser pulses. The LPI was used to represent the laser penetration rate and investigate the influence of flying altitude and PRF on the LPI. The results showed that as the flying altitude decreased by 1 km, the average LPI increased by 10%, and as the PRF decreased by 50 kHz, the average LPI increased by 2%. The effect of the LPI on digital elevation models (DEMs) was confirmed by visual images obtained by DEMs at five altitudes. The DEM obtained at an altitude of 2.745 km was coarsely textured, whereas that obtained at an altitude of 1.525 km was finely textured. The in-situ height data obtained from the electronic Global Navigation Satellite System (eGNSS) were compared with the data of the ALS-generated DEMs. The results indicated that when the LPI ≥60%, the height difference between the in situ data and DEM data was not prominent. However, when the LPI <60%, the ALS-derived DEM could be higher or lower than the in-situ height; the largest difference between the two was 1.7 m. The LPI of a forest should be considered for ALS survey planning, especially when consistent DEM precision for large tropical forest areas is paramount.     

天津市服务业利用外商投资的实证分析

服务业的发展是促进全球经济增长的重要力量,发达国家普遍呈现出产业结构高级化特征。利用外商投资可以促进中国服务业的发展,是加快经济发展的有效手段。通过对天津市服务业发展以及服务业利用外商直接投资现状的分析,对服务业外商直接投资与经济增长的关系进行了实证研究。研究结果表明:服务业外商直接投资不仅促进了天津经济的增长,同时,还对资本积累、产业结构、技术水平、就业程度及人力资本产生了不同程度的促进作用;技术水平进步、就业水平的提高、人力资本的提升又将带动天津经济增长。天津市应发挥现代服务业发展的优势,发挥天津自贸区的区位优势和政策优势,积极承揽国际服务外包。     

双量子阱结构OLED效率和电流的磁效应

通过结构为ITO/NPB(60 nm)/ Alq₃ ∶1 wt% rubrene(20 nm)/ Alq₃(3 nm)/ Alq₃ ∶1 wt% rubrene(20 nm)/ Alq₃(20 nm)/LiF/Al的双量子阱的黄色有机电致发光器件,研究了不同磁场强度下的发光效率和电流变化特性. 研究结果表明该器件的电流是随着磁场强度的增加而单调下降的,显示了器件的电阻是随着磁场强度的增加而增加的. 同时也得到了该结构有