黄、东海环流的数值研究Ⅲ——正压环流的数值模拟

依据黄、东海环流的的动力学模型 ,运用“流速分解法”对黄、东海正压环流进行了数值模拟。计算结果表明冬季黄海正压环流主要受风应力影响 ,基本形态为黄海暖流由济州岛西南进入南黄海中部 ,其东西两侧分别为两支向南流动的沿岸流 ;夏季主要受到潮致体力的影响 ,为一逆时针涡旋。东海环流主要是边界力作用驱动的结果 ,东海黑潮、台湾暖流和对马暖流较稳定。冬季风应力对东海环流表层流场有消弱作用 ,在夏季则有一定增强作用。     

Optimal Design for Main Dimensions of a 75000t Floating Production and Storage Vessel

The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined.     

Origin and evolution of alkali basaltic magma in the Okinawa Trough

I~IOXThe Okinawa Trough is an extending back--arc basin between the East China Sea Shelf andthe Ry'Ukyu Island Arc of Japan. There are widespreadly distributing acid pumice in the troughand a little basalt just in some area of the extending center. There have been some detailed rePOrtsabout the mineralogy and petrochemical feature of the subalkali tholeiite and alkali trachyte in thetrough (Zhai and Gan, 1995; Li et al., 1997; Qin and Zhai, 1988). This paper mainly reportselectron mic…     

二(甲基环戊二烯)钐氯化物合成和晶体结构研究

作者以 Sm Cl3 与 (CH3 Cp) Na反应分离得到了三价稀土有机配合物 [(CH3 Cp) 2 Sm Cl·THF]2 的单晶 ,X-射线四圆衍射测定 ,该配合物属正交晶系 ,Pbna空间群 ,晶胞参数 a=9.6 6 2 (2 ) ,b=16 .4 76 (9) ,c=2 0 .582 (9) ;α=β=γ=90°,Z=4。并分析比较 [(CH3 Cp) 2 Sm Cl· THF]2 与其他三价稀土一氯化物的结构特点     

Computation of Viscous Uniform and Shear Flow over A Circular Cylinder by A Finite Element Method

The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem.     

关于波浪Boussinesq方程的研究

对有关波浪 Boussinesq方程的研究成果进行了系统的归纳总结和评述 ,以期对本学科的发展起到一定的引导和促进作用     

舟山马岙峡道的水文泥沙特性和峡道效应

根据舟山本岛北部马岙峡道实测水文泥沙资料和沉积物采样分析结果以及对马岙岸段岸滩的现场踏勘结果，分析了马岙峡道的水文泥沙特性及其峡道效应。文章认为，受峡道地形限制，马岙岸段水流呈现显著的往复流特性，潮流流速较强，水体含沙量较低，泥沙淤积较弱，岸滩处于冲淤平衡状态；受峡道内涨落潮流分流和汇流的共同作用，马岙小泥糊礁附近发育水下沙嘴，该沙嘴是以落潮流作用为主形成的浅滩，受涨潮流改造而形成的，并将在涨落潮流作用下逐渐增长，形成连岛沙嘴，使小泥糊礁附近岸线发展成弧形岸线，并达成新的平衡。     

Variation in Water Masses on Shelf of Northern Bering Sea in September 2016-2018

Abstract

Based on hydrological data obtained during the 7th to 9th Chinese National Arctic Research Expeditions in the summers of 2016–2018, the main water structure on the shelf of the northern Bering Sea and the volume and heat fluxes of the Bering Strait throughflow were analyzed. Distinct variability was identified in the three Pacific water masses feeding the strait - Anadyr Water (AW), Bering Shelf Water (BSW) and Alaskan coastal water (ACW). Overall, the temperature and salinity of the entire section increased each year, with 2018 showing significant anomalies, i.e., a temperature anomaly of up to 1?°C and a maximum salinity anomaly of 2. From 2016 to 2018, the extent of the ACW gradually narrowed in the eastern part of this section, while the AW expanded eastward each year. The net volume transport through each of the three sections increased poleward from 1.65?Sv to 2.76?Sv, with the AW increasing from 0?Sv to 1.03?Sv, the BSW varying between 0.52–1.65?Sv, and the ACW gradually decreasing from 1.04?Sv to disappearing completely. The net heat fluxes were also poleward, varying between 25.77 TW and 61.50 TW, and showing a significant increase. Significant variations in magnitude and extent were observed in each water mass of the Bering Strait throughflow, which could produce widespread effects in the Arctic Ocean and the global ocean beyond.     

Numerical simulation of solitary wave scattering by a circular cylinder array

The interaction of a solitary wave with an array of surface-piercing vertical circular cylinders is investigated numerically. The wave motion is modeled by a set of generalized Boussinesq equations. The governing equations are discretized using a finite element method. The numerical model is validated against the experimental data of solitary wave reflection from a vertical wall and solitary wave scattering by a vertical circular cylinder respectively. The predicted wave surface elevation and the wave forces on the cylinder agree well with the experimental data. The numerical model is then employed to study solitary wave scattering by arrays of two circular cylinders and four circular cylinders respectively. The effect of wave direction on the wave forces and the wave runup on the cylinders is quantified.     

Numerical simulation of the hydrodynamic behaviour of submerged plane nets in current

The aim of this paper is to investigate the shape and tension distribution of fishing nets in current. A numerical model is developed, based on lumped mass method to simplify the net. The motion equation is set up for each lumped mass. The Runge–Kutta–Verner fifth-order and sixth-order method is used to solve these simultaneous equations, and then the displacement and tension of each lumped mass are obtained. In order to verify the validity of the numerical method, model tests have been carried out. The results by the numerical simulation agree well with the experimental data.