Iron isotopic analyses of geological reference materials on MC-ICP-MS with instrumental mass bias corrected by three independent methods

Here we report iron (Fe) isotopic data of three pure Fe solution standards (IRMM-014, GSB Fe, and NIST 3126a) and five widely used geological reference materials (RMs) from the United States Geological Survey and Geological Survey of Japan obtained on a Neptune Plus multi-collector–inductively coupled plasma–mass spectrometer (MC-ICP-MS) in our laboratory over the past 3 years. The instrumental mass bias was corrected by three independent methods: sample-standard bracketing (SSB), Ni doping?+?SSB, and ⁵⁷Fe–⁵⁸Fe double spike?+?SSB. Measurements reveal that both the Ni doping and double spike methods helped calibrate short-term fluctuations in mass bias. Collectively, almost all measurements of RMs yielded δ⁵⁶Fe within?±?0.05 of recommended values, provided that each sample was measured four times on MC-ICP-MS. For the first time, new recommended values for NIST SRM3126a are reported (δ⁵⁶Fe?=?0.363?±?0.006, 2SE, 95% CI; and δ⁵⁷Fe?=?0.534?±?0.010, 2SE).     

The effect of annealing on the luminescence decay-time of synthetic calcite:Mn

Calcite was synthesized by four methods, and the luminescence decay-time was measured for nine samples before and after heating hydrothermally in the temperature range 200–400°C. Decay-time data were collected between room temperature and approximately 15 K. The decay time at room temperature is approximately 50 ms, with little difference between a given calcite before and after hydrothermal treatment. The decay time at 15 K is always greater than at room temperature as the effect of thermal quenching diminishes. Differences in decay time before and after heating are more apparent at low temperature owing to this reduction in thermal quenching. The decay time decreased significantly in two samples, and an increase in decay time was observed in the remaining seven samples following heating. Among the latter group, the change in decay time was insignificant in three samples. The results are compared with previous data in which it was shown that the effect of heating is to increase the intensity of luminescence.     

Effect of nano-hematite morphology on photocatalytic activity

Nano-hematites, i.e., hematites with nanoparticle-, nanorod-, and nanotube-like morphologies, were synthesized via the hydrothermal method by controlling the reaction time, temperature, and reactant concentration. The nano-hematites of different crystal shapes all exhibited band gaps within the visible-light region (1.56–2.1 eV). Further, they showed weak ferromagnetic behavior, and their coercive magnetic field was larger than that of the bulk hematite. Moreover, all the nano-hematites also exhibited high photocatalytic activities during the degradation of methylene blue under visible-light irradiation. The experimental data fitted the Langmuir–Hinshelwood kinetics model very well. The nanorods had the highest photocatalytic rate constant per unit surface area, possibly owing to a higher aspect ratios; this lowers the electron–hole recombination rate. These results suggest that the crystal morphology of hematites has a significant effect on their physical and photocatalytic properties. Therefore, controlling the morphology of the materials is essential for obtaining well-tailored photocatalysts.     

Citizens as sensors: the world of volunteered geography

In recent months there has been an explosion of interest in using the Web to create, assemble, and disseminate geographic information provided voluntarily by individuals. Sites such as Wikimapia and OpenStreetMap are empowering citizens to create a global patchwork of geographic information, while Google Earth and other virtual globes are encouraging volunteers to develop interesting applications using their own data. I review this phenomenon, and examine associated issues: what drives people to do this, how accurate are the results, will they threaten individual privacy, and how can they augment more conventional sources? I compare this new phenomenon to more traditional citizen science and the role of the amateur in geographic observation.     

小体积萃取-石墨炉原子吸收法测定高纯硝酸钡中纳克级重金属元素

本文研究了石墨炉原子吸收光谱法测定高纯硝酸钡中超痕量重金属元素的分析技术。提出在大量钡基体存在时,采用小体积萃取体系APDC-MIBK同时萃取纳克级的Fe、Cu、Co和Ni。该法具有灵敏度高、无干扰、操作方便和减少沾污等特点。方法检出限为:Fe 7.2ng/g、Cu 12.8ng/g、Co 4.4ng/g和Ni 6.7ng/g。应用于红外光纤原料硝酸钡、硝酸铝中痕量重金属的测定,效果良好。     

Structural improvement of age-hardened gypsum-treated bauxite red mud waste using readily decomposable phyto-organics

Several years (7) after incidental lithification by added gypsum, the effect of crushing and phyto-organics on some physical properties of red mud wastes (RMW) was examined under laboratory conditions. It was hypothesized that mechanically breaking up the hardened masses would increase their permeability. However, on the contrary, crushing these rock-hard masses into <2-mm particles did not increase permeability. A phyto-organic treatment on the other hand greatly improved permeability of the crushed entities such that infiltration rates increased from 0 to 10 cm/h. After 24 weeks of incubation, the structure of the newly formed phyto-organically treated gypsum-hardened RMW aggregates was also substantially improved over that of the controls, as a >3-fold increase in resistance to disintegration during wet sieving was exhibited by the phyto-organically treated samples. The increase in water infiltration by combining crushing with phyto-organic applications was ascribed to a decrease in particle dispersion, creating more stable clay clusters, which in turn stabilized channels and pores. Conversely, it was concluded that the singular crushing of gypsum-hardened bauxite waste in the waste dumps is potentially wasteful and ineffective.     

数字地震观测中由台风产生的震颤信号分析

本文的工作源于我们在以宽频数字地震计和倾斜、重力仪开展对"慢地震"、"前驱波"等信号连续观测和分析的过程中,观测到不少异常的波动信号.在探讨这些异常信号的产生原因的研究中,发现其中一部分由热带气旋(台风)产生.     

浅谈阿舍勒黄铁矿型多金属矿的垂直分带

阿舍勒黄铁型多金属矿床位于阿尔泰地槽褶皱系的中泥盆统安山质—英安质火山—沉积岩中.矿体充填在火山管道内或火山口近侧,主矿体隐伏地下.矿化元素有铁、铜、铅、锌、金、银、硫、钡等,伴生有锗、镓、铟、硒、镉、铋等.矿体上部形态复杂并有分枝,向深部连成一体,是一个向北东侧伏的筒状体.矿体自上而下具垂宜分带,依次为:重晶石—硅化带;黄铁矿—多金属带;黄铁矿—铜、锌带等…     

Chemical composition of rock-forming minerals and crystallization physicochemical conditions of the Middle Eocene I-type Haji Abad pluton,SW Buin-Zahra,Iran

The Haji Abad intrusion is a well-exposed Middle Eocene I-type granodioritc pluton in the Urumieh–Dokhtar magmatic assemblage (UDMA). The major constituents of the investigated rocks are K-feldspar, quartz, plagioclase, pyroxene, and minor Fe–Ti oxide and hornblende. The plagioclase compositions fall in the labradorite, andesine, and oligoclase fields. The amphiboles range in composition from magnesio-hornblende to tremolite–hornblende of the calcic-amphibole group. Most pyroxenes principally plot in the field of diopside. The calculated average pressure of emplacement is 1.9 kbar for the granodioritic rocks, crystallizing at depths of about 6.7 km. The highest pressure estimated from clinopyroxene geobarometry (5 kbar) reflects initial pyroxene crystallization pressure, indicating initial crystallization depth (17.5 km) in the Haji Abad granodiorite. The estimated temperatures using two-feldspar thermometry give an average 724 °C. The calculated average temperature for clinopyroxene crystallization is 1090 °C. The pyroxene temperatures are higher than the estimated temperature by feldspar thermometry, indicating that the pyroxene and feldspar temperatures represent the first and late stages of magmatic crystallization of Haji Abad granodiorite, respectively. Most pyroxenes plot above the line of Fe³⁺?=?0, indicating they crystallized under relatively high oxygen fugacity or oxidized conditions. Furthermore, the results show that the Middle Eocene granitoids crystallized from magmas with H₂O content about 3.2 wt%. The relatively high water content is consistent with the generation environment of HAG rocks in an active continental margin and has allowed the magma to reach shallower crustal levels. The MMEs with ellipsoidal and spherical shapes show igneous microgranular textures and chilled margins, probably indicating the presence of magma mixing. Besides, core to rim compositional oscillations (An and FeO) for the plagioclase crystals serve as robust evidence to support magma mixing. The studied amphiboles and pyroxenes are grouped in the subalkaline fields that are consistent with crystallization from I-type calc-alkaine magma in the subduction environment related to active continental margin. Mineral chemistry data indicate that Haji Abad granodiorites were generated in an orogenic belt related to the volcanic arc setting consistent with the subduction of Neo-Tethyan oceanic crust beneath the central Iranian microcontinent.     

河北秦皇岛斑鬣狗巢穴(灵仙洞)及斑鬣狗的集群死亡与埋藏

河北省秦皇岛灵仙洞发现了一批最后斑鬣狗化石,标本达上千件,至少代表了30个不同个体,包括3具骨架(其中骨架Ⅰ是世界上迄今所发现最完整的1具),还发现了一些其他哺乳动物化石,共计26属27种.根据动物群组成、地质地貌以及堆积物的综合分析判断,它的时代可能属于中更新世晚期至晚更新世早期.动物群的生态组合反映当时处于一个温热偏干、半封闭或开阔的山间草原而周边山上有树林的生态环境.标本(尤其是完整骨架)的保存为典型的原地埋藏,死后未受到包括斑鬣狗自身在内的动物干扰和破坏.斑鬣狗在动物群中占绝对优势以及幼年个体和粪化石的发现,表明灵仙洞是一处斑鬣狗族群的巢穴.与其他斑鬣狗巢穴不同的是:斑鬣狗的猎物稀少,鲜见斑鬣狗的活动痕迹,尤其是幼年斑鬣狗啃咬形成的特定产物“nibbling sticks”,这说明灵仙洞既非用于猎物遗骸的储藏,也非用于幼崽的抚养,而是一处共用巢穴,同时也表明灵仙洞的骨骼聚集与埋藏有着特定的成因和机理.