Fractionation of major elements between coexisting H2O-saturated silicate melt and silicate-saturated aqueous fluids in aluminosilicate systems at 1-2 GPa

From experimental data in the systems Na₂O-Al₂O₃-SiO₂-H₂O, K₂O-Al₂O₃-SiO₂-H₂O at 1100°C, and CaO-Al₂O₃-SiO₂-H₂O at 1200°C in the 1-2 GPa pressure range, the solution behavior of the individual oxides in coexisting H₂O-saturated silicate melts and silicate-saturated aqueous fluids appears to be incongruent. Recalculated on an anhydrous basis, in the CaO-Al₂O₃-SiO₂-H₂O system, CaO^fluid/CaO^melt < 1, whereas in the Na₂O-Al₂O₃-SiO₂-H₂O and K₂O-Al₂O₃-SiO₂-H₂O systems, K₂O^fluid/K₂O^melt and Na₂O^fluid/Na₂O^melt both are greater than 1. The aqueous fluids are depleted in alumina relative to silicate melt.In the Na₂O-Al₂O₃-SiO₂-H₂O, K₂O-Al₂O₃-SiO₂-H₂O, and CaO-Al₂O₃-SiO₂-H₂O systems, fluid/melt partition coefficients for the individual oxides range between ∼0.005 and 0.35 depending on oxide, bulk composition and pressure. The alkali partition coefficients are about an order of magnitude higher than that of CaO. Alumina and silica partition coefficient values in the CaO-Al₂O₃-SiO₂-H₂O system are 10-20% of the values for the same oxides in the Na₂O-Al₂O₃-SiO₂-H₂O and K₂O-Al₂O₃-SiO₂-H₂O systems.Positive correlations among individual partition coefficients and oxide concentrations in the aqueous fluids are consistent with complexing in the fluid that involves silicate polymers associated with alkalis and alkaline earths and aluminosilicate complexes where alkalis and alkaline earths may serve to charge-balance Al³⁺, which is, perhaps, in tetrahedral coordination. Alkali aluminosilicate complexes in aqueous fluid appear more stable than Ca-aluminosilicate complexes.     

The application of single zircon evaporation and model Nd ages to the interpretation of polymetamorphic terrains: an example from the Proterozoic mobile belt of south India

The technique of single zircon dating from the thermal evaporation of ²⁰⁷Pb/²⁰⁶Pb (Kober 1986, 1987) provides a means of dating successive periods of growth and nucleation of zircons in polymetamorphic assemblages. In contrast Nd model ages may provide a measure of the period of crustal residency for the sample or its protolith. These two techniques have been combined to elucidate the tectonic history of the Proterozoic mobile belt of southern India, exposed south of the Palghat-Cauvery Shear Zone that marks the southern boundary of the Archaean craton of Karnataka. The two main tectonic units of this mobile belt comprise the Madurai and Trivandrum Blocks, both of which are characterised by massive charnockite uplands and low-lying polymetamorphic metasedimentary belts that have undergone a complex tectonic history throughout the Proterozoic. Evidence for early Palaeoproterozoic magmatism is restricted to the Madurai Block where single zircon evaporation ages from a metagranite (2436 ± 4 Ma) are similar to model Nd ages from a range of lithologies suggesting crustal growth at that time. The Trivandrum Block, to the south of the Achankovil shear zone, is comprised of the Kerala Khondalite Belt, the Nagercoil charnockites and the Achankovil metasediments. Single zircon evaporation ages, together with conventional zircon and garnet chronometry, suggest that all three units underwent upper-amphibolite facies metamorphism at ∼1800 Ma, an event unrecorded in the metagranite from the Madurai Block. This implies that the Madurai and Trivandrum blocks represent distinct terrains throughout the Palaeoproterozoic. Model Nd ages from the Achankovil metasediments are much younger (1500–1200 Ma) than those from the adjacent Kerala Khondalite Belt and Madurai Blocks (3000–2100 Ma), but there is no evidence for zircon growth in these metasediments during the Mesoproterozoic. Hence the comparatively young model Nd ages of the metasediments are indicative of a mixed provenance rather than a discrete period of crustal growth. Zircon overgrowths from the Madurai Block (547 ± 17 Ma) and Achankovil metasediments (530 ± 21 Ma) suggest that all tectonic units of the Proterozoic mobile belt of South India shared the same metamorphic history from the early Palaeozoic. This event has been recognised in the basement lithologies of Sri Lanka and East Antarctica, confirming that the constituent terrains of East Gondwana had assembled by this time. Received: 10 October 1995 / Accepted: 27 October 1997     

Reach‐scale channel geometry of a mountain river

Mountain rivers can be subject to strong constraints imposed by changes in gradient and grain size supplied by processes such as glaciation and rockfall. Nonetheless, adjustments in the channel geometry and hydraulics of mountain rivers at the reach scale can produce discernible patterns analogous to those in fully alluvial rivers. Mountain rivers can differ in that imposed reach‐scale gradient is an especially important control on reach‐scale channel characteristics, as indicated by examination of North St Vrain Creek in Colorado. North St Vrain Creek drains 250 km² of the Rocky Mountains. We used 25 study reaches within the basin to examine controls on reach‐scale channel geometry. Variables measured included channel geometry, large woody debris, grain size, and mean velocity. Drainage area at the study reaches ranged from 2·2 to 245 km², and gradient from 0·013 to 0·147 m m^?1. We examined correlations among (1) potential reach‐scale response variables describing channel bankfull dimension and shape, hydraulics, bedform wavelength and amplitude, grain size, ?ow resistance, standard deviation of hydraulic radius, and volume of large woody debris, and (2) potential control variables that change progressively downstream (drainage area, discharge) or that are likely to re?ect a reach‐speci?c control (bed gradient). We tested the hypothesis that response variables correlate most strongly with local bed gradient because of the segmented nature of mountain channels. Results from simple linear regression analyses indicate that most response variables correlate best with gradient, although channel width and width/depth ratio correlate best with discharge. Multiple regression analyses using Mallow's C_p selection criterion and log‐transformation of all variables produced similar results in that most response variables correlate strongly with gradient. These results suggest that the hypothesis is partially supported: channel bed gradient is likely to be a good predictor for many reach‐scale response variables along mountain rivers, but discharge is also an important predictor for some response variables. Copyright © 2004 John Wiley & Sons, Ltd.     

Factors influencing the abundance of deep pelagic bioluminescent zooplankton in the Mediterranean Sea

Measurements of the density of deep pelagic bioluminescent zooplankton (BL) were made with the Intensified Silicon Intensifier Target (ISIT) profiler in the Ligurian, Tyrrhenian, Adriatic, Ionian Seas and the Strait of Sicily from ～300 m to near seafloor. Mean BL densities ranged from 2.61 m^?3 at 500–1000 m depth in the Adriatic Sea to 0.01 m^?3 at 4000–5000 m depth in the E Ionian Sea. We investigated drivers of spatial variation of deep pelagic BL density. Linear regression was applied between surface chlorophyll a (Chl a) concentration and underlying BL density. Chl a values were determined from satellite derived 100 km radius composites (six 10-day means per ISIT deployment, over preceding 60 days). At 500–1000 m depth we found a significant positive relationship between mean BL density and mean Chl a in the period prior to 0–10 days (at 1% level) and prior to 10–40 days (at 5% level). Beyond 40 days no relationship between BL density and Chl a was found at this depth. At depths 1000–1500 m BL density values were low and no significant relationship with Chl a was detected. Generalised additive modelling (GAM) was used to assess the influence of benthic hotspots (seamount; cold water coral mound; mud volcano) on overlying BL density. A reduction in BL density was found downstream of the Palinuro seamount from 300 to 600 m. No effect on BL density in the overlying water column was detected from the presence of cold water corals. Higher BL densities were detected over the W Madonna dello Ionio mud volcano than at other sites sampled in the NW Ionian Sea. We find surface Chl a to be a good predictor of BL density in the mesopelagic zone; below this depth we hypothesise that processes affecting the efficiency of particle export to deep water may exert greater influence on BL density.     

Closed universes with black holes but no event horizons as a solution to the black hole information problem

We show that it is possible for the information paradox in black hole evaporation to be resolved classically. Using standard junction conditions, we attach the general closed spherically symmetric dust metric to a space–time satisfying all standard energy conditions but with a single point future c-boundary. The resulting Omega Point space–time, which has NO event horizons, nevertheless has black hole type trapped surfaces and hence black holes. However, since there are no event horizons, information eventually escapes from the black holes. We show that a scalar quintessence field with an appropriate exponential potential near the final singularity would give rise to an Omega Point final singularity.     

Classifying chalk microtextures: Sedimentary versus diagenetic origin (Cenomanian–Santonian,Paris Basin,France)

Microtexture describes the type of particles and their arrangement in matrix samples at scanning electron microscopy scale. Although a microtexture classification exists for micritic limestone, it cannot be directly applied to chalk. This study therefore proposes a classification of chalk microtextures and discusses the origin of microtexture variability. Chalk was sampled at thirteen spatio‐temporal locations along the coastline of northern France (Cenomanian–Santonian). Four criteria are defined to describe, characterize and determine chalk matrix microtexture: (i) mineralogical content; (ii) biogenic fraction; (iii) micritic fraction; and (iv) cement fraction. From these criteria, two major groups are defined: Pure Chalk Microtexture Group, with seven classes, and Impure Chalk Microtexture Group, divided into two subgroups: Argillaceous Microtexture with four classes and Siliceous Microtexture with two classes. Microtexture variability is related both to initial sedimentation and to diagenesis. Sedimentological conditions (for example, climate and distance from shore) affect chalk composition (carbonate content and type of insoluble particles), thus influencing microtexture. Changes in Pure Chalk Microtexture are the result of increasing diagenetic intensity. This classification can also be used to characterize the microtexture of subsurface chalk reservoirs. Reservoir quality depends on the petrophysical and mechanical properties of reservoir rocks, which can be better understood by exploring their sedimentary and diagenetic history, revealed by the study of chalk microtexture variability.     

A simple and effective method for preserving the sediment–water interface of sediment cores during transport

We describe a method for preserving the upper sediments of fragile sediment cores during transport from field sites and assess potential effects on subsequent laboratory analyses. This method addresses the need to minimize disturbance to the surfaces of unfrozen sediment cores used for paleoenvironmental or other high-resolution sedimentological analyses during transport. A polymer gel (sodium polyacrylate) applied above the sediment surface acts as a barrier to movement while also preserving surface undulations. The gel seal can preserve even exceptionally fine sedimentary structures (<0.2 mm) in the upper sediments of lacustrine and fiord sediment cores, but may react with organic material (e.g. algal mats) present on some sediment surfaces. This reaction creates an adhesive layer at the gel’s base but it can be handled effectively during sampling. The gel seal minimizes surface deformation and preserves surficial sediments better than traditional seals made of water-absorbent floral foam, wax or paper towel. In addition to permitting detailed sedimentary and subfossil investigations of the sediment–water interface, this method shows no detectable effects on measurements of total organic carbon or total nitrogen values in the sediment. This method is inexpensive, non-hazardous and applicable to many coring systems and sediment types.     

Heterogeneous bubble nucleation and disequilibrium H2O exsolution in Vesuvius K-phonolite melts

This study focuses on constraining bubble nucleation and H₂O exsolution processes in alkalic K-phonolite melts, using “white pumice” of the 79 AD eruption of Vesuvius as starting material. The first set of experiments consisted of H₂O solubility runs at 1153 to 1250 K and pressures between 50 and 200 MPa, to constrain equilibrium water concentrations along the decompression pathways. The decompression experiments were equilibrated with H₂O at 150 MPa and 1173 and 1223 K, and then decompressed at 3 to 17 MPa/s before rapid quenching. Experiments nucleated bubbles within the first 50 MPa pressure drop, producing maximum bubble number densities (N_V), corrected to melt volume, of 3.8 × 10¹⁴ m^− 3 at 1173 K and 4.3 × 10¹³ m^− 3 at 1223 K. Most bubbles were not visibly attached to crystals, except for a subset attached to pyroxenes primarily in the 1173 K experiments. When compared with prior bubble nucleation studies, the reduced nucleation ΔP and relatively low N_V observed indicate predominantly a heterogeneous nucleation mechanism. Melt–vapor–crystal wetting angles measured in 1173 K experiments from bubbles attached to pyroxene crystals are 36 to 69°, which are similar to those measured on titanomagnetite crystals in calc-alkaline dacite melts. The 1223 K experiments have porosities and water concentrations that largely track equilibrium, despite the rapid decompression rate. The 1173 K experiments deviate strongly from equilibrium trends in both porosity and water concentration, and slower H₂O diffusion rates are likely the cause of the inhibited bubble growth. Bubble number densities from 79 AD Vesuvius natural EU2 pumice are relatively high (2 to 4 × 10¹⁵ m^− 3; [Gurioli, L., Houghton, B.F., Cashman, K.V., Cioni, R., 2005. Complex changes in eruption dynamics during the 79 AD eruption of Vesuvius. Bull. Volcanol. 67: 144–159.]) when corrected to vesicularity. In comparison, corrected N_V's from homogeneous and heterogeneous bubble nucleation experiments from this study and prior work are at least factor of 5 lower, indicating perhaps that the natural magmas initially nucleated bubbles in the presence of CO₂. The disequilibrium H₂O exsolution seen in the 1173 K experiments indicates that inhibited bubble growth could lead to delayed exsolution in the conduit in cooler K-phonolite magmas.     

'You Gotta Love This City': The Whitlams and inner Sydney

This analysis of music in cultural geography, in the context of the inner Sydney-based band, The Whitlams, traces the creative links between sounds, 'scenes' and places. Based in Newtown, The Whitlams are associated with political values, evident in the band's name, and social values tied to and opposed to urban changes, such as gentrification, where community is threatened. The band's lyrics emanate from their experiences, challenging commercialisation of city life at different scales and reflecting the anomie of city living, but defending its virtues, whilst also fostering place stereotypes. The audience was similarly inner-city based until the band's recent commercial success, which has challenged The Whitlams' identity and radicalism, and resulted in mainstream appropriation. Though The Whitlams continue to reaffirm their local identity, and local audiences have remained, the popularity and commodification of their music has challenged concepts of shared meaning, the link between bands and their fans, and the connection between music and its place of origin. The Whitlams' music nevertheless remains a means of evoking and sharing a sense of place.