Different magneto-rotational supernovae

We present the results of two-dimensional calculations of a magneto-rotational (MR) supernova explosion with a collapsing core for various core masses, rotational angular momenta, and magnetic-field configurations. It is shown that the MR mechanism produces an explosion energy that corresponds to observed values. The form of the explosion depends substantially on the initial configuration of the magnetic field. MR instability develops during the evolution of the magnetic field in an MR supernova explosion, resulting in an exponential increase of all components of the magnetic field, thereby substantially decreasing the time scale of the MR explosion. The energy of the supernova increases with the core’s mass and initial rotational energy.     

Rare earth elements in tourmaline and chlorite from tin-bearing assemblages: Factors controlling fractionation of REE in hydrothermal systems

The REE distribution in minerals from tin-bearing ore-magmatic systems of the Russian Far East, including the Komsomolsk, Khingan, and Badzhal districts in the Amur region and the Kavalerovo, Lesozavodsk, Voznesenka, Furmanovo, and other districts in Primorsky krai, has been studied. The main attention was focused on tourmaline and chlorite; in addition, associated biotite, feldspar, apatite, fluorite, and carbonates were examined. The major factors affecting the REE distribution in the studied minerals are the temperature, Eh, and pH of the mineral-forming medium; crystal chemistry; partition coefficients of REE between fluid and minerals; and complexation that disturbs the coherent behavior of REE. Fluid evolution at different stages is characterized.     

The Seyfert 1 galaxy Ark 120. Spectral variability in 1992–2005

We have studied the variability of the Hβ line and the adjacent continuum in the spectrum of the Seyfert galaxy Ark 120, based on spectral observations of the galaxy’s nucleus obtained in the Crimea in 1992–2005, supplemented by published data for 1988–1996. Irregular variability on various timescales (years to days) can be accompanied by periodic brightness variations in both the continuum and the Hβ line, with a period of P ～ 430 days and an amplitude of Δm ～ 0.2 ^m in the continuum, which were traced for more than 13 cycles. In total, in 1988–2005, the flux variations in the line lag those in the continuum by 55 ± 9 days if calculated from the peak of the cross correlation function, or by 72 ± 7 days, if calculated from the centroid of the CCF. The delay is correlated with the continuum brightness, increasing when the continuum flux increases. The Hβ line profiles indicate both a high degree of diversity and the presence of features that recur after various extended time intervals. Analysis of the evolution of the differences between each individual normalized line profile and the mean normalized profile indicates systematic motion of excesses relative to the average profile from negative to positive radial velocities. In contrast, parts of the Hβ line with low radiation relative to the mean normalized profile evolve in the opposite direction (from the red to the blue Hβ wing). This pattern is also typical for the rotating broad-line region, if this region has the form of a disk. The rotation period exceeds 9000–10000 days, or 25–27 years. The size of the broad-line region calculated form this period corresponds to a reverberation time of no fewer than 30 days, consistent with the results of cross-correlation analysis.     

Surface complexation modeling of Cu(II) adsorption on mixtures of hydrous ferric oxide and kaolinite

Background  

The application of surface complexation models (SCMs) to natural sediments and soils is hindered by a lack of consistent models and data for large suites of metals and minerals of interest. Furthermore, the surface complexation approach has mostly been developed and tested for single solid systems. Few studies have extended the SCM approach to systems containing multiple solids.     

Crystal chemistry of selenates with mineral-like structures: V. Crystal structures of (H3O)2[(UO2)(SeO4)2(H2O)](H2O)2 and (H3O)2[(UO2)(SeO4)2(H2O)](H2O), new compounds with rhomboclase and goldichite topology

The crystal structures of two new compounds (H₃O)₂[(UO₂)(SeO₄)₂(H₂O)](H₂O)₂ (1, orthorhombic, Pnma, a = 14.0328(18), b = 11.6412(13), c = 8.2146(13) Å, V = 134.9(3) ų) and (H₃O)₂[(UO₂)(SeO₄)₂(H₂O)](H₂O) (2, monoclinic, P2₁/c, a = 7.8670(12), b = 7.5357(7), c = 21.386(3) Å, β = 101.484(12)°, V = 1242.5(3) ų) have been solved by direct methods and refined to R ₁ = 0.076 and 0.080, respectively. The structures of both compounds contain sheet complexes [(UO₂)(SeO₄)₂]^2? formed by cornershared [(UO₂)O₄(H₂O)] bipyramids and SeO₄ tetrahedrons. The sheets are parallel to the (100) plane in structure 1 and to (?102) in structure 2. The [(UO₂)(SeO₄)₂(H₂O)]^2? layers are linked by hydrogen bonds via interlayer groups H₂O and H₃O⁺. The sheet topologies in structures 1 and 2 are different and correspond to the topologies of octahedral and tetrahedral complexes in rhomboclase (H₂O₂)⁺[Fe(SO₄)₂(H₂O)₂] and goldichite K[Fe(SO₄)₂(H₂O)₂](H₂O)₂, respectively.     

Rotational and magnetic corrections to the g-mode frequencies in a one-dimensional MHD model

The central magnetic field and rotation of the solar radiative zone are responsible for corrections to the g-mode frequencies. Magnetogravitational spectra are calculated analytically in a simple one-dimensional MHD model that goes beyond the WKB approximation and avoid any cusp resonances that trap the wave within the radiative zone in the presence of a weak magnetic background. The calculations are compared with spacecraft observations of the 1% frequency shifts for candidate g-modes found in the SOHO GOLF experiment. The magnetic correction is the main contribution for a strong magnetic field satisfying the approximation used. It is shown that a constant magnetic field of 700 kG in the radiative zone provides the required frequency shift for the n = ?10 g-mode. The rotational correction, which is due to the Coriolis force in the one-dimensional model used, is much less than a percent (α_Ω ≤ 0.003).     

Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.     

Water balance in the playa-lakes of an arid environment,Monegros, NE Spain

The playa-lakes of the Monegros desert in north-east Spain are saline wetlands in an arid environment, a rare phenomenon in Europe. These extremely valuable habitats are threatened by changes associated with agricultural expansion and incorporation of new irrigated areas. An understanding of the present hydrologic regime will enable changes to be identified, particularly those brought about by flooding and pollution caused by irrigation surplus. This study sets out to show the results of applying a daily water balance in three selected playa-lakes. The balance was in two parts and consisted of: (1) the average balance for all the endorheic basin using the BALAN_11 program, and (2) the water balance in some playa-lakes, applying discharge flows obtained from the previous balance. The resulting volumes of water were converted to water depths and contrasted with reference volumes taken from field and Landsat images. The model was calibrated by applying various hypotheses of function which enabled the results to be adjusted. The proposed balance is an acceptable reproduction of field water measurements during this period, and underlines the consistency of the conceptual model. The methodology used is appropriate for understanding the playa-lakes function and for monitoring them for conservation purposes.     

Evaluation of distributed recharge in an upland semi-arid karst system: the West Bank Mountain Aquifer,Middle East

Assessment of recharge in a structurally complex upland karst limestone aquifer situated in a semi-arid environment is difficult. Resort to surrogate indicators such as measurement of spring outflow and borehole discharge, is a common alternative, and attempts to apply conventional soil moisture deficit analysis may not adequately account for the intermittent spate conditions that arise in such environments. A modelling approach has been made using the West Bank Mountain Aquifer system in the Middle East as a trial. The model uses object oriented software which allows various objects to be switched on and off. Each of the main recharge processes identified in the West Bank is incorporated. The model allows either conventional soil moisture deficit analysis calculations or wetting threshold calculations to be made as appropriate, and accommodates both direct recharge and secondary recharge. Daily time steps enable recharge and runoff routing to be calculated for each node. Model runs have enabled a series of simulations for each of the three aquifer basins in the West Bank and for the whole of the West Bank. These provide recharge estimates comparable to those prepared by earlier workers by conventional means. The model is adaptable and has been successfully used in other environments.     

Artificial neural network and liquefaction susceptibility assessment: a case study using the 2001 Bhuj earthquake data,Gujarat, India

This study pertains to prediction of liquefaction susceptibility of unconsolidated sediments using artificial neural network (ANN) as a prediction model. The backpropagation neural network was trained, tested, and validated with 23 datasets comprising parameters such as cyclic resistance ratio (CRR), cyclic stress ratio (CSR), liquefaction severity index (LSI), and liquefaction sensitivity index (LSeI). The network was also trained to predict the CRR values from LSI, LSeI, and CSR values. The predicted results were comparable with the field data on CRR and liquefaction severity. Thus, this study indicates the potentiality of the ANN technique in mapping the liquefaction susceptibility of the area.