Mechanical and low-cycle fatigue behavior of stainless reinforcing steel for earthquake engineering applications

Use of stainless reinforcing steel (SRS) in reinforced concrete (RC) structures is a promising solution to corrosion issues. However, for SRS to be used in seismic applications, several mechanical properties need to be investigated. These include specified and actual yield strengths, tensile strengths, uniform elongations and low-cycle fatigue behavior. Three types of SRSs (Talley S24100, Talley 316LN and Talley 2205) were tested and the results are reported in this paper. They were compared with the properties of A706 carbon reinforcing steel (RS), which is typical for seismic applications, and MMFX II, which is a high strength, corrosion resistant RS. Low-cycle fatigue tests of the RS coupons were conducted under strain control with constant amplitude to obtain strain life models of the steels. Test results show that the SRSs have slightly lower moduli of elasticity, higher uniform elongations before necking, and better low-cycle fatigue performance than A706 and MMFX II. All five types of RSs tested satisfy the requirements of the ACI 318 code on the lower limit of the tensile to yield strength ratio. Except Talley 2205, the other four types of RSs investigated meet the ACI 318 requirement that the actual yield strength does not exceed the specified yield strength by more than 18 ksi (124 MPa). Among the three types of SRSs tested, Talley S24100 possesses the highest uniform elongation before necking, and the best low-cycle fatigue performance.     

Processes of India’s offshore summer intraseasonal sea surface temperature variability

Active and break phases of the Indian summer monsoon are associated with sea surface temperature (SST) fluctuations at 30–90 days timescale in the Arabian Sea and Bay of Bengal. Mechanisms responsible for basin-scale intraseasonal SST variations have previously been discussed, but the maxima of SST variability are actually located in three specific offshore regions: the South-Eastern Arabian Sea (SEAS), the Southern Tip of India (STI) and the North-Western Bay of Bengal (NWBoB). In the present study, we use an eddy-permitting 0.25° regional ocean model to investigate mechanisms of this offshore intraseasonal SST variability. Modelled climatological mixed layer and upper thermocline depth are in very good agreement with estimates from three repeated expendable bathythermograph transects perpendicular to the Indian Coast. The model intraseasonal forcing and SST variability agree well with observed estimates, although modelled intraseasonal offshore SST amplitude is undere-stimated by 20–30 %. Our analysis reveals that surface heat flux variations drive a large part of the intraseasonal SST variations along the Indian coastline while oceanic processes have contrasted contributions depending of the region considered. In the SEAS, this contribution is very small because intraseasonal wind variations are essentially cross-shore, and thus not associated with significant upwelling intraseasonal fluctuations. In the STI, vertical advection associated with Ekman pumping contributes to ～30 % of the SST fluctuations. In the NWBoB, vertical mixing diminishes the SST variations driven by the atmospheric heat flux perturbations by 40 %. Simple slab ocean model integrations show that the amplitude of these intraseasonal SST signals is not very sensitive to the heat flux dataset used, but more sensitive to mixed layer depth.     

Integrated stratigraphy and 40Ar/39Ar chronology of the early to middle Miocene Upper Freshwater Molasse in western Bavaria (Germany)

A detailed integrated stratigraphic study (biostratigraphy and magnetostratigraphy) was carried out on five sections from the western part of the Bavarian Upper Freshwater Molasse of the North Alpine Foreland Basin (NAFB), greatly improving the chronostratigraphy of these sediments. The sections belong to the lithostratigraphic units Limnische Untere Serie (UL) and Fluviatile Untere Serie (UF) and contain 19 (mostly new) small-mammal bearing levels, significantly refining the local biostratigraphy. Radiometric ages obtained from glass shards from tuff horizons are used together with the biostratigraphic information for constructing and confirming the magnetostratigraphic correlation of the studied sections to the Astronomical Tuned Time Scale (ANTS04; Lourens et al. in Geologic Time Scale 2004, Cambridge University Press, 2004). This correlation implies that the UL lithostratigraphic unit corresponds to the latest Ottnangian and the Early Karpatian, whereas the UF corresponds to the Karpatian and the Early Badenian. This indicates that the Brackish- to Freshwater Molasse transition already occurred during the late Ottnangian. The pre-Riesian hiatus occurred in the latest Karpatian and lower Early Badenian in Eastern Bavaria and Bohemia and in the Late Karpatian and earliest Badenian in Western Bavaria. The geochemical and Ar–Ar data of volcanic ashes suggest that highly evolved silicic magmas from a single volcano or volcanic center, characterized by a uniform Nd isotopic composition, erupted repetitively over the course of at least 1.6 Myr. Three phases of eruptive activity were identified at 16.1 ± 0.2 Ma (Zahling-2), 15.6 ± 0.4 Ma (Krumbad), and 14.5 ± 0.2 Ma (Heilsberg, Hegau). The correlation of the local biostratigraphic zonation to the ANTS04 enables further the characterization of both the Ottnangian–Karpatian and Karpatian–Badenian boundaries in the NAFB by small-mammal biostratigraphy. According to these results the Ottnangian–Karpatian boundary is contemporaneous with the first appearance datum of Megacricetodon bavaricus (in the size of the type population) and the first common occurrence of Keramidomys thaleri, whereas Ligerimys florancei, Melissiodon dominans and Prodeinotherium aff. bavaricum have been already disappeared during the late Ottnangian. The Karpatian–Badenian boundary is characterized by a significant size increase of the large Megacricetodon lineage and possibly a (re-)immigration of Prodeinotherium bavaricum.     

The Monitor project: JW 380 – a 0.26-, 0.15-M⊙, pre-main-sequence eclipsing binary in the Orion nebula cluster

We present a general recipe for constructing N -body realizations of galaxies comprising near spherical and disc components. First, an exact spherical distribution function for the spheroids (halo and bulge) is determined, such that it is in equilibrium with the gravitational monopole of the disc components. Second, an N -body realization of this model is adapted to the full disc potential by growing the latter adiabatically from its monopole. Finally, the disc is sampled with particles drawn from an appropriate distribution function, avoiding local-Maxwellian approximations. We performed test simulations and find that the halo and bulge radial density profile very closely match their target model, while they become slightly oblate due to the added disc gravity. Our findings suggest that vertical thickening of the initially thin disc is caused predominantly by spiral and bar instabilities, which also result in a radial re-distribution of matter, rather than scattering off interloping massive halo particles.     

A theory of pressure sensor performance in snow

A theory of pressure sensor response in snow is derived and used to examine the sources of measurement errors in snow water equivalent (SWE) pressure sensors. Measurement errors in SWE are caused by differences in the compressibility of the pressure sensor and the adjacent snow layer, which produces a shear stress along the perimeter of the sensor. When the temperature at the base of the snow cover equals 0 °C, differences in the snowmelt rate between the snow–SWE sensor interface and the adjacent snow–soil interface may also produce a shear stress along the sensor's perimeter. This shear stress perturbs the pressure field over the sensor, producing SWE measurement errors. Snow creep acts to reduce shear stresses along the SWE sensor's perimeter at a rate that is inversely proportional to the snow viscosity. For sustained periods of differential snowmelt, a difference in the mass of snow over the sensor compared with the surrounding soil will develop, producing additional permanent errors in SWE measurements. The theory indicates that SWE pressure sensor performance can be improved by designing a sensor with a high Young's modulus (low compressibility), low aspect ratio, large diameter and thermal properties that match those of the surrounding soil. Simulations of SWE pressure sensor errors using the theory are in close agreement with observed errors and may provide a means to correct historical SWE measurements for use in hydrological hindcast or climate studies. Published in 2003 by John Wiley & Sons, Ltd.     

Cloud height differences on Saturn

Spectrophotometry from 0.6–2.5 μm at 1.5% spectral resolution of Saturn's equator and visibly dark South Equatorial Belt near a 1980 ring-plane crossing shows substantially less absorption by methane over the equator than over the SEB. Model fits using Appleby's model atmosphere and a multiple scattering model lead to the conclusion that the pressure levels of the clouds in the two regions differ by 20%. The region of high clouds is coincident with the location of the equatorial fast jet observed by Voyager.