Use of Chemotaxonomy To Study the Influence of Benzalkonium Chloride on Bacterial Populations in Biodegradation Testing

Contradictory results are reported for the behaviour of quaternary ammonium compounds (QACs) in sewage treatment plants (STPs). QACs may sorb onto activated sludge. Only little information is available with respect to effects of QACs against bacteria in STPs. Only 5 to 15 % of bacteria present in sewage sludge can be detected by means of culture dependent microbiological methods. The shift of the bacterial populations due to effects of test compounds have not been studied up to now with culture independent methods. The microbial populations shift was studied in situ using culture independent chemotaxonomy profiling ubiquinones and polyamines. Additionally, toxic effects of QACs against bacteria present in the test vessels of the Zahn‐Wellens test (OECD 302 B) were assessed with a toxicity control in the test. The ubiquinone profiles representing changes in Gram‐negative populations mainly showed that the activated sludge was affected only in test vessels containing benzalkonium chloride. According to chemotaxonomy Acinetobacter or/and some members of Pseudomonas spp. have been selected by benzalkonium chloride after some adaptation period (8 to 12 days).     

Sediment yield and storage variations in the Négron River catchment (south western Parisian Basin,France) during the Holocene period

In the Négron River catchment area (162 km²), surface‐sediment stores are composed of periglacial calcareous ‘grèze’ (5 × 10⁶ t) and loess (21 × 10⁶ t), and Holocene alluvium (12·6 × 10⁶ t), peat (0·6 × 10⁶ t) and colluvium (18·5 × 10⁶ t). Seventy‐five per cent of the Holocene sediments is stored along the thalwegs. Present net sediment yield, calculated from solid discharge at the Négron outlet, is low (0·6 t km^?2 a^?1) due to the dominance of carbonate rocks in the catchment. Mean sediment yield during the Holocene period is 7·0 t km^?2 a^?1 from alluvium stores and 7·6 t km^?2 a^?1 from colluvium stores. Thus, the gross sediment yield during the Holocene period is about 18·7 t km^?2 a^?1 and the sediment delivery ratio 3 per cent. The yield considerably varies from one sub‐basin to another (3·9 to 24·5 t km^?2 a^?1) according to lithology: about 25 per cent and 50 per cent of initial stores of periglacial grèze and loess respectively were reworked during the Holocene period. Sediment yield has increased by a factor of 6 in the last 1000 years, due to the development of agriculture. The very high rate of sediment storage on the slope during that period (88 per cent of the yield) can be accounted for by the formation of cultivation steps (‘rideaux’). It is predicted that the current destruction of these steps will result in a sediment wave reaching the valley floors in the coming decades. Subboreal and Subatlantic sediments and pollen assemblages in the Taligny marsh, where one‐third of the alluvium is stored, show the predominant influence of human activity during these periods in the Négron catchment. Copyright © 2002 John Wiley & Sons, Ltd.     

Seismic analysis of base-isolated liquid storage tanks using the BE–FE–BE coupling technique

A three-dimensional soil–structure–liquid interaction problem is numerically simulated in order to analyze the dynamic behavior of a base-isolated liquid storage tank subjected to seismic ground motion. A dynamic analysis of a liquid storage tank is carried out using a hybrid formulation, which combines the finite shell elements for structures and the boundary elements for liquid and soil. The system is composed of three parts: the liquid–structure interaction part, the soil–foundation interaction part, and the base-isolation part. In the liquid–structure interaction part, the tank structure is modeled using the finite elements and the liquid is modeled using the internal boundary elements, which satisfy the free surface boundary condition. In the soil–foundation interaction part, the foundation is modeled using the finite elements and the half-space soil media are modeled using the external boundary elements, which satisfy the radiation condition in the infinite domain. Finally, above two parts are connected with the base-isolation system to solve the system's behavior. Numerical examples are presented to demonstrate the accuracy of the developed method, and an earthquake response analysis is carried out to demonstrate the applicability of the developed technique. The properties of a real LNG tank located in the west coast of Korea are used. The effects of the ground and the base-isolation system on the behavior of the tank are analyzed.     

铅橡胶复合阻尼器的性能试验研究

介绍作者提出的铅橡胶复合阻尼器的构造与耗能原理，通过不同形状，不同大小铅心的8个铅橡胶复合阻尼器的循环荷载试验，研究了频率、应变幅值、循环次数、铅芯直径、竖向压力等对铅橡胶复合阻尼器的影响规律。研究结果表明，铅橡胶复合阻尼器工作性能稳定，耗能性能和抗疲劳性能好。     

密云县水源地土地利用规划研究

该文通过分析密云县土地利用的自然和社会条件 ,在此基础上围绕水源地水源环境保护的目标 ,对该区域进行土地利用规划 ,即县城密云镇为增长极以及为密云水库生态区、西南粮油菜生产区、东南果粮生产和生态建设区、西北林牧生态区以及东北生态保护和林果生产区。     

The property, age and formation environment of the palaeokarst in Qinghai-Xizang Plateau

The karst landforms distributed on the Qinghai-Xizang (Tibet) Plateau can be genetically classed with the Tertiary underground karst, which were gradually exhumed to the surface with the uplift of the plateau during Quaternary period. The relative deposits of the Tertiary palaeokarst processes, such as the residuum and speleothem, were discovered recently in the southern and southeastern fringe areas of the plateau, where has geological-currently been disintegrated by the headward erosion processes of the modern river systems. The major chemical components of the clay portion of the residuum consist mainly of SiO2C, Al2CO3 and Fe2O3. The clay minerals composition of the clay portion belongs to illite-kaolinite pattern for most of the residuum samples, and kaolinite-illite pattern for a few of the samples. It can be judged from the silicic acid index and the clay minerals composition that the formation of the residuum of the Plateau was in its initial phase. However, such a lower chemical weathering index only reflected the weathering degree in the bottom or lower parts of the lateritic weathering crust. The relatively intensive chemical weathering processes of the surface layers of the lateritic weathering crust could be logically speculated. The surface feature textures of quartz grains in the residuum were formed mainly by the chemical erosion, which revealed a long-term humid-tropical environment when the residuum and the palaeokarst formed.     

星载微波散射计技术及其在极地的应用

简要介绍了微波散射计的原理、星载微波散射计的发展状况及用于提高散射计图像空间分辨率的图像滤波重建算法。在此基础上结合几种星载微波散射计数据简要介绍了微波散射计在南北两极的应用情况 (海冰图测绘、海冰运动监测、海冰分类、极地冰盖研究等 )及其未来研究展望。     

地震周期的存在及形成机制讨论

根据1900～2000年中国大陆、台湾及全球地层记录及前人的研究，论证了地层周期存在的可能性及形成机制。作者认为，是太阳活动、月球运动轨道及各行星运动轨道的周期性变化，通过磁力及万有引力改变地球内部物质的分布，从而引起地球自转速度的周期性变化，最终致使地展出现周期性的活跃期及平静期。     

Monsoonal precipitation variation in the East Asia since A.D. 1840 ——Tree-ring evidences from China and Korea

The main characteristic of the East Asian climate is the monsoon system. Plenty of studies have demonstrated that the Asian monsoon system plays a crucial role in the global climate sys- tem [1-4]. The Asian summer monsoon can be divided into two parts, t…     

Asymmetric one‐storey elastic systems with non‐linear viscous and viscoelastic dampers: Simplified analysis and supplemental damping system design

Investigated is the accuracy in estimating the response of asymmetric one‐storey systems with non‐linear viscoelastic (VE) dampers by analysing the corresponding linear viscous system wherein all non‐linear VE dampers are replaced by their energy‐equivalent linear viscous dampers. The response of the corresponding linear viscous system is determined by response history analysis (RHA) and by response spectrum analysis (RSA) extended for non‐classically damped systems. The flexible and stiff edge deformations and plan rotation of the corresponding linear viscous system determined by the extended RSA procedure is shown to be sufficiently accurate for design applications with errors generally between 10 and 20%. Although similar accuracy is also shown for the ‘pseudo‐velocity’ of non‐linear VE dampers, the peak force of the non‐linear VE damper cannot be estimated directly from the peak damper force of the corresponding linear viscous system. A simple correction for damper force is proposed and shown to be accurate (with errors not exceeding 15%). For practical applications, an iterative linear analysis procedure is developed for determining the amplitude‐ and frequency‐dependent supplemental damping properties of the corresponding linear viscous system and for estimating the response of asymmetric one‐storey systems with non‐linear VE dampers from the earthquake design (or response) spectrum. Finally, a procedure is developed for designing non‐linear supplemental damping systems that satisfy given design criteria for a given design spectrum. Copyright © 2003 John Wiley & Sons, Ltd.