Photométries comparées des émissions de l'hydrogène et de l'hélium dans les régions externes des protubérances

Résumé La variation du rapport d'intensités H/D3 est étudiée dans les régions périphériques de deux protubérances d'éclat assez faibles et qui étaient suspendues au-dessus de la chromosphère. La partie supérieure des protubérances est relativement plus intense en D3, tandis qu'en dessous des protubérances le phénomène inverse s'observe. Il faut considérer que ces variations ne peuvent pas s'expliquer par des phénomènes de saturation, mais pourraient résulter du régime dynamique de la matière qui émet les radiations observées.     

Lithospheric mantle beneath the south-eastern Siberian craton: petrology of peridotite xenoliths in basalts from the Tokinsky Stanovik

We provide petrographic, major and trace element data for over 30 spinel peridotite xenoliths from the Tokinsky Stanovik (Tok) volcanic field on the Aldan shield to characterize the lithospheric mantle beneath the south-eastern margin of the Siberian craton, which formed in the Mesoproterozoic. High equilibration temperatures (870–1,010°C) of the xenoliths and the absence of garnet-bearing peridotites indicate a much thinner lithosphere than in the central craton. Most common among the xenoliths are clinopyroxene-poor lherzolites and harzburgites with Al₂O₃ and CaO contents nearly as low as in refractory xenoliths from kimberlite pipes (Mir, Udachnaya) in the central and northern Siberian craton. By contrast, the Tok peridotites have higher FeO, lower Mg-numbers and lower modal orthopyroxene and are apparently formed by shallow partial melting (3 GPa). Nearly all Tok xenoliths yield petrographic and chemical evidence for metasomatism: accessory phlogopite, amphibole, phosphates, feldspar and Ti-rich oxides, very high Na₂O (2–3.1%) in clinopyroxene, LREE enrichments in whole-rocks.Electronic Supplementary Material Supplementary material is available for this article at     

A conceptual hydrogeological model of ophiolite hard-rock aquifers in Oman based on a multiscale and a multidisciplinary approach

Ophiolites are found all over the world: from the Alps to the Himalayas, in Cuba, Papua-New Guinea, New Caledonia, Newfoundland, etc. They are composed of hard rocks—basalt, dolerite, gabbro and peridotite, which are formed at the mid-oceanic ridges, with specific ridge-related tectonic fracturing and intense hydrothermal alteration. Their geological and thus their hydrogeological properties differ from those of both granite or classical gabbro and classical basaltic lava. A conceptual hydrogeological model of these hard-rock aquifers was developed based on the convergent results of a multidisciplinary approach at several spatial scales, from rock-sample (centimetre) to catchment (kilometre), on well-preserved ophiolite rocks in Oman. In ophiolite rocks, groundwater circulation takes place mostly in the fissured near-surface horizon (50 m thick), and, to a lesser degree, in the tectonic fractures. Hydrograph analysis (Water Resour Res 34:233–240, 1977), interpretation of numerous pumping tests using both classical Theis and dual porosity models [Water Resour Res 32:2733–2745, 1996; Comput Geosci J (in press)], and mercury porosity and hydraulic conductivity lab-measurements support the aquifer parameter estimates. The hydraulic conductivity K of the fissured horizon is estimated at 10^–5 to 10^–6 m/s for gabbro and dolerite, and 10^–7 m/s for peridotite. The storage coefficient S of the peridotite aquifer is estimated at 10^–3 and appears to be controlled mainly by microcracks (20 to 100 m wide). Tectonic fractures in the ophiolite have similar hydrodynamic properties regardless of lithology (10^–1<T<10^–4 m²/s and 10^–1<S<10^–3) though the probability of obtaining productive wells is two to three times greater in gabbro and dolerite than in peridotite. Some of the tectonic fractures produce small hydrothermal, hyperalkaline springs in the peridotite. The water budget and hydrochemistry of the Oman ophiolite are characterized and support the conceptual hydrogeological model. Despite low annual rainfall, a relatively low hydraulic conductivity and a significant storage coefficient explain why most of the streams in peridotite are perennial.

---

Résumé Les ophiolites se trouvent partout dans le monde : des Alpes à lHymalaya, à Cuba, Papouasie Nouvelle-Guinée, Nouvelle Calédonie, etc. Les ophiolites sont composées de roches dures basaltiques, de dolérites, gabbros et péridotites, qui sont formées aux rides mi-océaniques, avec, en relation avec les rides, une fracturation tectonique et une altération hydrothermale intense. Leurs propriétés géologiques et hydrogéologiques diffèrent de celles des granites ou des gabbros classiques ou des laves basaltiques classiques. Un modèle hydrogéologique conceptuel des aquifères de hard-rock a été développé sur les résultats convergents dune approche multidisciplinaire à différentes échelles spatiales, de léchantillon de roche de quelques centimètres à la taille du bassin versant en kilomètres, des ophiolites bien conservées dOman. Dans les roches ophiolitiques, la circulation des eaux souterraines est surtout localisée dans les fissures dun horizon de surface de plus dune cinquantaine de mètres et à un degré moindre dans les fractures tectoniques. Lanalyse des hydrographes (Water Resour Res 34:233–240, 1977), linterprétation des nombreux essais de pompage utilisant des modèles classiques de Theis et des modèles à double porosité (Water Resour Res 32:2733–2745, 1996; Comput Geosci J (Soumis), la porosité au mercure et la conductivité hydraulique calculée en laboratoire supportent lestimation des paramètres de laquifère. La conductivité hydraulique K de lhorizon fissuré est estimée entre 10^–5 et 10^–6 m/s pour les gabbros et les dolérites, et 10^–7 m/s pour les péridotites. Le coefficient demmagasinement S de laquifère de péridotite est estimé à 10^–3 et semble être contrôlé par les micro-fractures (20 à 100 m de largeur). Les fractures tectoniques dans les ophiolites possèdent des propriétés hydrodynamiques en regard de la lithologie (10-1<T<10-4 m²/s et 10-1/S/10-3) bien que la probabilité dobtenir des puits productifs est trois plus grand dans le grabbro et la dolérite que la péridétite. Quelques unes des fractures tectoniques produisent de petites sources hydrothermales hyperalcalines dans la péridotite. Le bilan hydrologique et hydrochimique de lophiolite dOman caractérise le modèle hydrogéologique conceptuel. Malgré des faibles précipitations annuelles, une relativement basse conductivité hydraulique et un coefficient demmagasinement significatif expliquent pourquoi la plus part des cours deau sur les péridotites ne sont jamais taris.

---

Resumen Las rocas ofiolitas se encuentran en muchas partes del mundo desde los Alpes a los Himilaya, Newfoundland, Nueva Caledonia etc. Son rocas duras compuestas de basalto, dolerita, gabro y peridotita que son formadas por los cordones medio-oceánicos y por fracturación relacionada con los cordones tectónicos específicos y alteración hidrotermal intensa. La geología y los propiedades hidrogeológicas varian entre las de granito y gabro clásico y lava de basalto clásico. Se desarrolló un modelo conceptual de los acuíferos de las rocas duras Basado en los resultados convergentes de un enfoce multidisciplinario a varias escalas a partir de muestras de roca (centímetro) a cuenca kilómetro) enfocado en las rocas ofilíticas bien preservados en Oman. En las rocas ofiolíticas la circulación de agua ocurre principalmente en el horizonte de fisuras cercanas a la superficie (>50 m de espesor) y en un grado menos importante en fracturas tectónicas. Los estimados de los parámetros de estos acuíferos se basan en análisis de hidrógrafos (Water Resour Res 34:233–240, 1977), en la interpretación de pruebas de bombeo usando los modelos clásicos de Theis y de porosidad doble (Hamm y Bidaux 1996; Lods y Gouze, [en prensa]), y porosidad de mecurio y conductividad hidraúlica medida en el laboratorio. La conductividad hidraúlica K del horizonte fisurado se estima en 10E-5 a 10E-6 m-s para gabro y dolerita y 10E-7 para peridotita. El coeficiente de abastecimiento S del acuífero peridotita se estima en 10–3 y parece ser controlado principalmente por microfracturas (20 to 100 m de ancho). Las fracturas tectónicas en la ofiolita tienen propiedades hidrodinámicas similares independientes de la litología (10–1<T<10–4 m²/s and 10–1<S<10–3) pero la probabilidad de obtener pozos productivos es dos o tres veces mayor en gabro que en dolerita o peridotita. Algunas de las fracturas tectónicas producen pequeñas descargas de agua hidrotermal hiperalcalina en la peridotita. El presupuesto e hidroquímica de las ofilitas de Omán se caracteriza y apoya en el modelo conceptual hidrogeológico. La baja lluvia anual, una conductividad hidraúlica relativamente baja y un coeficiente de abastecimiento importante explican porqué la mejoría de los drenajes en peridotita es peremne.

     

Comparison of β-dimethylsulfoniopropionate (DMSP) levels in two mediterranean ecosystems with different trophic levels

β-dimethylsulfoniopropionate (DMSP) and dimethylsulfide (DMS) concentrations were recorded from September 1999 to September 2000 in two geographically close ecosystems, differently affected by eutrophication: the Little Bay of Toulon and the Niel Bay (N.W. Mediterranean Sea, France). Little Bay had higher nutrient levels ([NO₃⁻]_max. = 30.3 μM; [PO₄³⁻]_max. = 0.46 μM) and higher chlorophyll a concentrations ([chl a]_mean = 2.4 μg/L) compared to Niel Bay ([NO₃⁻]_max. = 19.7 μM; [PO₄³⁻]_max. = 0.17 μM; [chl a]_mean = 0.4 μg/L). In the two sites, we measured dissolved (DMSP_d < 0.2 μm) and particulate DMSP (DMSP_p > 0.2 μm) concentrations. The DMSP_p was particularly analysed in the 0.2–5, 5–90 and > 90 μm fractions. In the eutrophicated Little Bay, DMSP_d concentrations showed a clear seasonality with high values from January to March (124–148 nM). The temporal profile of the DMSP_p concentrations was similar, peaking in February–March (38–59 nM). In the less eutrophic Niel Bay, DMSP_p concentrations were much lower (6–9 nM in March–April), whereas DMSP_d concentrations were relatively high (110–92 nM in February–March). DMS concentrations were elevated from the end of the winter to the spring in Little Bay, ranging from 3 nM in October to 134 nM in March. In the less eutrophic Niel Bay, lower DMS levels were observed, generally not exceeding 20 nM. Each particulate fraction (0.2–5; 5–90; > 90 μm) contained less DMSP in Niel Bay than in Little Bay. At both sites, the 5–90 μm fraction made up most of the DMSP_p. This 5–90 μm fraction consisted of microphytoplankton, principally Dinophyceae and Bacillariophyceae. The 5–90 μm biomass calculated from cell biovolumes, was more abundant in Little Bay where the bloom at the end of the winter (165 μg/L in March) occurred at the same time as the DMSP peaks. The estimated DMSP_p to biomass ratio for the 5–90 μm fraction was always higher in Little Bay than in Niel Bay. This suggests that the high DMSP levels recorded in Little Bay were not only due to a large Dinophyceae presence in this ecosystem. Indeed, the peak of DMSP_p to biomass ratio obtained from cell biovolumes (0.23 nmol/μg in March) was consistent with the proliferation of Alexandrium minutum. This Dinophyceae species may account for between 50% (2894 cells/L) and 63% (4914 cells/L) of the total phytoplankton abundance in the Little Bay of Toulon.     

Hydrochemistry of carbonate terrains in alpine glacial settings

Nearly 200 analyses of meltwaters, ice and snow from three alpine glacial sites in carbonate terrain are summarized and discussed in terms of sources of solutes and kinetic controls on the progress of weathering reactions. Most data derive from the Swiss Glacier de Tsanfleuron which is based on Cretaceous and Tertiary pure and impure limestones. Two other sites (Marmolada, Italian Dolomites and the Saskatchewan Glacier, Alberta) are based on a mixed calcitic-dolomitic substrate. Most solutes originate from carbonate dissolution; moreover, where pyrite is present its oxidation supplies significant sulphate and forces more dissolution of carbonate. The ratios Sr²⁺/Ca²⁺ and Mg²⁺/Ca²⁺ are much higher in Tsanfleuron melt-waters than local bedrock, a phenomenon that can be reproduced in the laboratory at small percentages of dissolution. These anomalous ratios are attributed to incongruent dissolution of traces of the metastable carbonates Mg-calcite and aragonite. These phases also provide Na⁺ to solution. K⁺ is argued to originate mainly by ion-exchange on clays with solute Ca²⁺. Quartz and very minor feldspar dissolution are also inferred. Locally enhanced input from atmospheric sources is recognized by high Cl^? and associated Na⁺. The progress of weathering reactions has been evaluated by the trends in the data, computer modelling and some simple laboratory experiments. The most dilute samples show a trend towards removal of CO₂ to low partial pressures (c. 10^?5.5 atmospheres), reflecting initially rapid carbonate dissolution and relatively slow dissolution of gaseous CO₂. Later addition of atmospheric CO₂ or acid from pyrite oxidation allows further carbonate dissolution, but solutions show a wide range of saturations, and CO₂ pressures as high as 10^?2.2 where pyrite oxidation is important. In a carbonate terrain, measurement of electroconductivity (corrected to 25°C) and alkalinity in the field allows the following preliminary deductions (where meq stands for milliequivalents): where S is the minimum meq(Ca²⁺ + Mg²⁺) produced by simple dissolution of carbonate unconnected with pyrite oxidation. As with any proxy method, these deductions do not remove the need for chemical analysis of waters in a given study area.     

The solubility of nantokite (CuCl(s)) and Cu speciation in low-density fluids near the critical isochore: An in-situ XAS study

The solubility of nantokite (CuCl_(s)) and the structure of the predominant copper species in supercritical water (290-400 bar at 420 °C; 350-450 °C at 290 bar; 500 °C at 350 bar; density = 0.14-0.65 g/cm³) were investigated concurrently using synchrotron X-ray absorption spectroscopy (XAS) techniques. These conditions were chosen as they represent single phase solutions near the critical isochore, where the fluid density is intermediate of typical values for vapour and brine and is highly sensitive to even small changes in pressure. X-ray absorption near edge spectroscopy (XANES) and extended X-ray absorption spectroscopy (EXAFS) analyses show that aqueous copper occurs in a slightly distorted linear coordination in the solutions studied, with an average of 1.35(±0.3) Cl and 0.65(±0.3) O neighbours. The solubility of CuCl_(s) decreases exponentially with decreasing water density (i.e., decreasing pressure at constant temperature), in a manner similar to the solubility behaviour of salts such as NaCl in water vapour. Based on this similarity, an apparent equilibrium constant for the dissolution reaction of 0.5 ± 0.4 was calculated from a regression of the data at 420 °C, and it was determined that each Cu atom is solvated by approximately three water molecules. This indicates that under these conditions, copper solubility is controlled mainly by the structure of the second-shell hydration, which is essentially invisible to the XAS techniques used in this study.These results demonstrate that for a supercritical fluid near the critical isochore, decreasing pressure may initiate precipitation of copper even before boiling or phase separation. Such a process could be responsible for near-surface ore deposition in seafloor hydrothermal systems, where supercritical fluids experience rapid pressure changes during the transition between lithostatic and hydrostatic domains.     

In situ LA-ICP-MS U–Pb titanite dating of Na–Ca metasomatism in orogenic belts: the North Pyrenean example

In the Pyrenees, in association with the rotation of the Iberian plate around Europe during the Mid-Cretaceous, a Na–Ca metasomatism is recognized as a complementary record of the hydrothermal activity that led to Na-metasomatism (albitization) and talc–chlorite mineralization. It affected metasedimentary rocks as well as Hercynian granites. In situ laser ablation ICP-MS U–Pb analyses of titanite grains formed in albitites during metasomatism date the Na–Ca metasomatism between 110 and 92 Ma. The temperature of the Na–Ca metasomatism is estimated to be approximately 550 °C. Both the time constraints and temperature estimates suggest that the Na–Ca metasomatism is related to the low-P high-T North Pyrenean metamorphism.     

Thermo-mechanical behavior of energy piles in high plasticity clays

Energy piles make use of constant and moderate ground temperature for efficient thermal control of buildings. However, this use introduces new engineering challenges because the changes of temperature in the foundation pile and ground induce additional deformations and forces in the foundation element and coupled thermo-hydro-mechanical phenomena in the soil. Several published full-scale tests investigated this aspect of energy piles and showed thermally induced deformation and forces in the foundation element. In parallel, significant progress has been made in the understanding of thermal properties of soils and on the effect of cyclic thermal load on ground and foundation behavior. However, the effect of temperature on the creep rate of energy piles has received practically no attention in the past. This paper reports the experimental results of an in situ tension thermo-mechanical test on an energy pile performed in a very stiff high plasticity clay. During the in situ test, the pile was subjected to thermal loading by circulating hot water in fitted pipes, simulating a thermal load in a cooling-dominated climate, at different levels of mechanical loading. The axial strain and temperature in the pile, and the load–displacement of the pile were monitored during the tension test at different locations along the center of the pile and at the pile head, respectively. The data showed that as the temperature increases, the observed creep rate of the energy pile in this high plasticity clay also increases, which will lead to additional time-dependent displacement of the foundation over the life time of the structure. It was also found that the use of geothermal piles causes practically insignificant thermally induced deformation and loads in the pile itself.