A transdisciplinary analysis of water problems in the mountainous karst areas of Morocco

Water management and engineering in the karstic High Atlas of Morocco are difficult tasks under the prevailing geological, hydrogeological, geomorphological, vegetational and climatic conditions. It is important to be able to understand and predict the characteristics and availability of water for future water planning in the region under changing climatic and agricultural conditions. An interdisciplinary analysis of problems and adequate hydrological modelling tools developed by geologists, hydrologists and biologists are necessary. The karst areas of the High Atlas Mountains are characterised by impermeable triassic basalt underlying substantial subsurface reservoirs with high potential discharge rates. The karst groundwater aquifers are extensive but largely unknown in dimension, probably with a hierarchical network of groundwater flow paths. It is estimated that approximately 70% of the surface water is directly lost to groundwater. Steep landslide- and debris flow prone slopes exist next to coarse-grained, highly porous river beds. Infrequent, high intensity rainfall or snowmelt causes a particularly high flood risk to these karst areas. In addition, agriculture and land use changes have degraded the karst areas. The most important driving forces for degradation include permanent overgrazing even during droughts and the use of firewood by a continually growing population. Large scale degradation of vegetation has occurred in the oro-mediterranean (mountainous Mediterranean) zone, between 2600 and 3400 m which coincides with the most important zone for karstic groundwater creation. The combination of high amounts of groundwater flow and rapid surface flow due to sparse vegetation has increased the problems of flood flow.     

Water and sanitation in the Buenos Aires metropolitan region: Fragmented markets, splintering effects?

This paper discusses the provision of water and sanitation services and the related urban impacts in Buenos Aires circa 2005. The first part of the paper focuses on the metropolitan region (BAMR) which is larger than the area served by the Aguas Argentinas S.A. (AASA) concession (i.e. the capital and its conurbano). It highlights a form of institutional fragmentation that is reflected in the diverse management practices of the numerous service providers and results in differentiated levels of and access to services. The paper discusses the technical, economic and regulatory factors that have historically resulted in this institutional fragmentation. The second part of the article focuses on AASA’s water concession agreement. It demonstrates that, although the agreement had an in-built splintering logic, its implementation led to a more “integrated approach” based on the “reality on the ground”. On the whole, the conclusion regarding the application of the splintering urbanism concept to Buenos Aires is a mixed one and depends on the scale of observation. Although at regional level (BAMR), a form of “institutional fragmentation” would appear to be obvious, it is the result of a long and complex historical process and, while recent neo-liberal reforms in service provisions have “cemented” this fragmentation, they did not actually cause it. If we take the AASA service area in isolation, the trend in the decade following the contracting out of the service has been one of improved service provision and access—although this was not achieved through increased integration of the supply system. Finally, in the case of the Buenos Aires metropolitan region, the splintering urbanism thesis defended by Marvin and Graham needs to be nuanced in several significant ways.     

Magnesium isotope systematics of the lithologically varied Moselle river basin, France

Magnesium and strontium isotope signatures were determined during different seasons for the main rivers of the Moselle basin, northeastern France. This small basin is remarkable for its well-constrained and varied lithology on a small distance scale, and this is reflected in river water Sr isotope compositions. Upstream, where the Moselle River drains silicate rocks of the Vosges mountains, waters are characterized by relatively high ⁸⁷Sr/⁸⁶Sr ratios (0.7128-0.7174). In contrast, downstream of the city of Epinal where the Moselle River flows through carbonates and evaporites of the Lorraine plateau, ⁸⁷Sr/⁸⁶Sr ratios are lower, down to 0.70824.Magnesium in river waters draining silicates is systematically depleted in heavy isotopes (δ²⁶Mg values range from −1.2 to −0.7‰) relative to the value presently estimated for the continental crust and a local diorite (−0.5‰). In comparison, δ²⁶Mg values measured in soil samples are higher (∼0.0‰). This suggests that Mg isotope fractionation occurs during mineral leaching and/or formation of secondary clay minerals. On the Lorraine plateau, tributaries draining marls, carbonates and evaporites are characterized by low Ca/Mg (1.5-3.2) and low Ca/Sr (80-400) when compared to local carbonate rocks (Ca/Mg = 29-59; Ca/Sr = 370-2200), similar to other rivers draining carbonates. The most likely cause of the Mg and Sr excesses in these rivers is early thermodynamic saturation of groundwater with calcite relative to magnesite and strontianite as groundwater chemistry progressively evolves in the aquifer. δ²⁶Mg of the dissolved phases of tributaries draining mainly carbonates and evaporites are relatively low and constant throughout the year (from −1.4‰ to −1.6‰ and from −1.2‰ to −1.4‰, respectively), within the range defined for the underlying rocks. Downstream of Epinal, the compositions of the Moselle River samples in a δ²⁶Mg vs. ⁸⁷Sr/⁸⁶Sr diagram can be explained by mixing curves between silicate, carbonate and evaporite waters, with a significant contribution from the Vosgian silicate lithologies (>70%). Temporal co-variation between δ²⁶Mg and ⁸⁷Sr/⁸⁶Sr for the Moselle River throughout year is also observed, and is consistent with a higher contribution from the Vosges mountains in winter, in terms of runoff and dissolved element flux. Overall, this study shows that Mg isotopes measured in waters, rocks and soils, coupled with other tracers such as Sr isotopes, could be used to better constrain riverine Mg sources, particularly if analytical uncertainties in Mg isotope measurements can be improved in order to perform more precise quantifications.     

Structural investigation of the synthetic CaAn(PO4)2 (An = Th and Np) cheralite-like phosphates

The crystallographic structures of the synthetic cheralite, CaTh(PO₄)₂, and its homolog CaNp(PO₄)₂ have been investigated by X-ray diffraction at room temperature. Rietveld analyses showed that both compounds crystallize in the monoclinic system and are isostructural to monazite LnPO₄ (Ln = La to Gd). The space group is P2₁/n (I.T. = 14) with Z = 2. The refined lattice parameters of CaTh(PO₄)₂ are a = 6.7085(8) Å, b = 6.9160(6) Å, c = 6.4152(6) Å, and β = 103.71(1)° with best fit parameters R _wp = 4.87%, R _p = 3.69% and R _B = 3.99%. For CaNp(PO₄)₂, we obtained a = 6.6509(5) Å, b = 6.8390(3) Å, c = 6.3537(8) Å, and β = 104.12(6)° and R _wp = 6.74%, R _p = 5.23%, and R _B = 6.05%. The results indicate significant distortions of bond length and angles of the PO₄ tetrahedra in CaTh(PO₄)₂ and to a lesser extent in CaNp(PO₄)₂. The structural distortions were confirmed by Raman spectroscopy of CaTh(PO₄)₂. A comparison with the isostructural compounds LnPO₄ (Ln = Ce and Sm) confirmed that the substitution of the large rare earth trivalent cations with Ca²⁺ and Th⁴⁺ introduces a distortion of the PO₄ tetrahedra.     

Flexural isostatic response of the Alps to increased Quaternary erosion recorded by foreland basin remnants,SE France

We test the hypothesis that flexural isostatic compensation of the mass removed by enhanced Quaternary erosion is responsible for uplift of the Western European Alps and their forelands. We use two well‐preserved and well‐dated (1.8 Ma) abandonment surfaces of foreland basin remnants in SE France (the Chambaran and Valensole plateaux) as passive benchmarks for tilting of the foreland. Estimating their initial slope from morphometric scaling relationships, we determine bulk post‐depositional tilting of 0.5–0.8% for these surfaces. The calculated isostatic response of the Alpine lithosphere to erosional unloading, using the method recently proposed by Champagnac et al. [Geology 35 (2007) 195–198] , yields a predicted tilting of 0.3–0.4% in the considered areas, explaining approximately half of the determined post‐depositional tilting. Such long‐term deformation being insensitive to cyclic loading/unloading because of glaciations, we suspect the other half to be related to as yet undetermined long‐wavelength and long‐lived tectonic process(es).     

Sur la présence de nickel dans un gisement de bauxite près de Mégare

Résumé L'exploitation récente d'un gisement de bauxite près de Mégare (Grèce) a fait apparaître sur les calcaires de base une concentration verte d'oxyde de nickel relativement élevée. La présence dans le gisement d'argiles rouges, renfermant de fortes proportions d'oxyde de fer avec des teneurs relativement faibles en alumine et des traces d'oxyde de nickel, induit à penser qu'il s'agit d'un produit latéritique dérivé d'une roche ultrabasique et transporté ultérieurement sur la région calcaire karstifiée avec ses remplissages bauxitiques. L'étude se termine par une hypothèse sur la genèse de ce gîte singulier.

---

The recent mining of a bauxite deposit near Megara (Greece) has shown on the footwall limestone a relatively high concentration of a green nickel oxide. The occurrence in the same deposit of red clays with a rather high percentage of iron oxide and a low content of alumina, together with some traces of nickel, induces to think that this material is composed of a lateritic soil derived from an ultrabasic rock and subsequently transported on karstified limestone with its bauxitic fillings. — The study ends with an hypothesis on the genesis of this unusual deposit.

     

Potentiometric determination of calcium and magnesium in seawater

Methods are described for the complexometric determination of calcium and magnesium in seawater, using an amalgamated silver electrode for end-point detection. In the presence of a small amount of mercury(II)-chelonate, the amalgamated silver electrode serves as a pM indicator during the complexometric titration, the Hg complex being stronger than Ca, Mg and Sr complexes. Calcium is determined by titration with EGTA, calcium+magnesium+strontium by titration with EDTA and magnesium is obtained by difference. Average values of 0.02120 (standard deviation 0.00004) for Ca:Cl‰ and 0.06671 (standard deviation 0.00014) for Mg:Cl‰ were obtained for samples from tropical North Atlantic Ocean.     

Longitudinal strength of a high-speed ferry

The longitudinal strength of the high-speed ferry was investigated by subjecting the ship's hull girder to long-term loads obtained from a frequency-domain panel code. Prior to the statistical analysis, linearly computed transfer functions were corrected for nonlinear effects, yielding two sets of transfer functions valid for different wave amplitudes. One set corresponded to the hogging condition; the other set, to the sagging condition. Two regular equivalent design waves were specified that resulted in loads representing the most severe global design load conditions. The still-water loading condition, yielding a still-water vertical bending moment in hogging, was superimposed on the wave-induced loads to obtain the total (design) loads in hogging. For the sagging condition only, additional impact-related loads were superimposed to obtain the total (design) loads in sagging. A finite element model of the ship's structure was subjected to pressure distributions according to the two regular design waves. For comparison with classification society rule values, a simple beam theory strength analysis of the ship's midship section was performed first, and then another finite element analysis was carried out, whereby the imposed loads were tuned to the rule values of vertical bending moments. Rule-based magnitudes of nominal maximum longitudinal stress deviated significantly (25–39%) from comparable stresses obtained by the panel code based finite element analysis. However, stresses obtained from the rule-based finite element analysis agreed more favorably, especially in hogging. In the uppermost deck, for example, the panel code based compressive stress was only 9% larger than the comparable stress from the rule-based finite element analysis.     

Bioaccumulation et elimination du 65Zn par Gammarus aequicauda martimov

Uptake of ⁶⁵Zn by Gammarus aequicauda results in a concentration factor of approximately 50 and it is characterised by a maximal accumulation level attained as early as the third day of the experiment. After ingestion by the gammarids of twenty contaminated meals which are distributed over a 45-day period, a transfer of ⁶⁵Zn between the food and the consumer can be observed but there is no sign of the biomagnification phenomenon. The retention rate of the radionuclide is only about 1·5% and the ⁶⁵Zn concentration in the gammarids remains markedly inferior to that of the ingested food.The elimination of the ⁶⁵Zn fixed directly from water takes place according to an exponential model which corresponds to the existence of three biological half-lives of the radionuclide, $\text{Tb}{}_1\text{? 0·5 day, Tb}{}_2\text{? 3·5 days and Tb}{}_3\text{? days}$. The excretion of ⁶⁵Zn accumulated from food is a simple exponential phenomenon which corresponds to only one biological half-life of approximately 17 days.