Buried and Submerged Greek Archaeological Coastal Structures and Artifacts as Gauges to Measure Late Holocene Seafloor Subsidence off Calabria,Italy

This synthesis integrates recently acquired archaeological and geological data with earlier documented observations to shed light on the subsidence of ancient Greek coastal facilities in southern Italy. These are now positioned between former shorelines and inner shelf sectors at five Calabrian margin localities. Submergence of coastal to inner shelf facilities has resulted in part from sea‐level rise by about 2 m associated with glacio‐hydro‐isostatic factors since archaic to classic Greek time. This phenomenon alone, however, does not explain the wide variation of measured subsidence rates from site‐to‐site. The marked lowering of coastal site substrates by seismo‐tectonic activity (including extensional fault motion), stratal readjustments at depth, and compaction of underlying sediment sequences is significant. Four of the subsided facilities are positioned near emerged Calabrian areas where prevailing Holocene average annual land uplift rates range to ˜1.0 mm/yr; at the fifth, near Hipponion, terrains have risen by nearly 2 mm/yr. In marked contrast, submerged and/or buried structures record the following late Holocene long‐term average rates of coastal margin subsidence: Sybaris‐Thuri on the Taranto Gulf margin (˜0.5–1.0 mm/yr); Hipponion‐Vibo Valentia along the Tyrrhenian coast (˜0.8 to ˜3.2 mm/yr); and Locri‐Epizefiri, Kaulonia, and Capo Colonna on Calabria's Ionian margin (˜1.6, ˜1.6–2.4, and ˜4.0 mm/yr, respectively). © 2012 Wiley Periodicals, Inc.     

Taphonomic analysis of small mammal bone remains preyed upon by wildcats (Carnivora: Felidae) from the central Monte Desert (Mendoza,Argentina)

The present study analysed the taphonomic characteristics of small mammal bone accumulations produced by small felids in an area from the central Monte Desert (Mendoza, Argentina). In order to provide criteria to identify the role that these predators had in the formation of zooarchaeological assemblages, the anatomical representation, bone breakage patterns and degrees of digestive corrosion were evaluated. The main taphonomic results are: low average values for the relative abundance of skeletal elements; greater representation of mandibles, maxillae, isolated incisors, humeri and femora than the remaining elements; preponderance of cranial elements with high proportion of isolated teeth; elevated frequencies of proximal limb bones compared with distal parts; high degree of breakage in all skeletal elements and digestive corrosion on almost all diagnostic bones (mainly moderate and heavy). The values of the studied taphonomic variables indicate that small felids in this area made severe alterations to the bones of their prey (mainly rodents), attributable to the category of extreme modifier, while preserving enough skeletal elements to allow their taphonomic characterization. Tooth marks or grooves on bone surfaces produced by scratching and chewing were not detected. The low relative abundance of skeletal elements, the high degree of breakage and the elevated frequency of elements with digestion traces represent general taphonomic patterns that fall within those reported for other South American small carnivores.     

First evidence of Campanian radiolarians in Turkey and implications for the tectonic setting of the Upper Antalya Nappes

The definition and inventory of the upper units of the Antalya Nappes or “Calcareous Antalya Nappes” (CAN) are still a matter of controversies and often conflicting interpretations. In the Gedeller type locality, we logged a new succession that sheds light on the detailed stratigraphy of the Upper Antalya Nappes. The lower part of the series corresponds to the uppermost part of the Kemer Gorge Nappe and is overthrust by the Ordovician Seydişehir Formation of the Tahtalı Dağ Nappe. The newly described Gedeller Formation belongs to the Kemer Gorge Nappe and is represented by Campanian (Upper Cretaceous) Scaglia-type pelagic limestones, which yielded radiolarians of the Amphipyndax pseudoconulus Zone. It is demonstrated that the “Calcareous Antalya Nappes” are composed of three different nappes, the Kemer Gorge, Bakırlı and the Tahtalı Dağ nappes, all of them belonging to the Upper Antalya Nappes system.     

Significance of ancient sulfide PGE and Re–Os signatures in the mantle beneath Calatrava,Central Spain

Spinel lherzolite and wehrlite xenoliths from the Cenozoic Calatrava volcanic field carry the geochemical imprint of metasomatic agents that have affected the subcontinental lithospheric mantle beneath Central Iberia. Some xenoliths (mainly wehrlites) were enriched in REE, Sr, P, and CO₂ by silicic-carbonate-rich metasomatic melts/fluids, while others record the effects of subduction-related hydrous silicate fluids that have precipitated amphibole and induced high Ti/Eu in primary clinopyroxene. The petrographic observations and geochemical data suggest that interstitial glass in the xenoliths represent the quenched products of Si-rich melts that infiltrated the mantle peridotite shortly before the entrainment of the xenoliths in the host magmas that erupted ca 2 million years ago. During their infiltration, the metasomatic melts reacted with peridotite, resulting in silica enrichment, while remobilizing grains of iron-rich monosulfide solid solution (Fe-rich Mss) initially enclosed in, or intergranular to, primary olivine and pyroxenes. In situ laser ablation inductively coupled plasma-mass spectrometry analysis of single sulfide grains reveals that the Fe-rich Mss in glass shows platinum-group element (PGE) patterns and ¹⁸⁷Os/¹⁸⁸Os compositions identical to the Fe-rich Mss occurring as inclusions in, or at grain boundaries of primary silicates. Moreover, independent of its microstructural position, Fe-rich Mss exhibits PGE and ¹⁸⁷Os/¹⁸⁸Os signatures typical of Mss either residual after partial melting or crystallized directly from sulfide melts. Our findings reveal that young metasomatic melt(s)/fluid(s) may carry remobilized sulfides with PGE and Os-isotopic signatures identical to those of texturally older sulfides in the peridotite xenolith. These sulfides thus still provide useful information about the timing and nature of older magmatic events in the subcontinental mantle.     

Fluoride Biomonitoring around a Large Aluminium Smelter Using Foliage from Different Tree Species

In order to study the pollution gradient in the vicinity of a large aluminium production facility in Patagonia (Argentina), a passive biomonitoring was performed employing foliage from three tree species. Primary scope was to identify pollution gradients and to select suitable tree species which can be used as biomonitor plants in the study area. Therefore, leaves of Eucalyptus rostrata, Populus hybridus and different needle ages of Pinus radiata were collected at different distances from the industry and the fluoride concentration was analysed in washed and unwashed samples in order to determine the amount of external fluoride. Washing reduced the F‐concentrations by 24, 39 and 51% on average in E. rostrata, P. hybridus and P. radiata, respectively, indicating that species‐specific characteristics determine the accumulation and wash‐off of dust‐associated fluorine. F‐concentrations varied from 6 to 3652 ppm F in unwashed samples indicating a steep pollution gradient in the study area. The influence of F‐emissions was discernible in all samples up to a distance of 3500 m from the smelter. E. rostrata accumulated more fluorine than the other species at equal distance from the emission source. The present study confirms that aluminium smelting results in high F deposition in the study area. Establishing a biomonitor network around large emitters is suitable and feasible to evaluate the efficiency of air control measures.     

A stress and displacement discontinuity element method for elastic transversely anisotropic rock

The paper presents closed‐form solutions for stress and displacement influence functions for stress discontinuity (SD) and displacement discontinuity (DD) elements, for a two‐dimensional plane‐strain elastic, transversely anisotropic medium. The solutions for SD elements are based on Kelvin's problem and for DD elements on the concept of dipoles. Stress and displacement influence functions are derived for the following elements: constant SD, linear SD, constant DD, linear DD, square root DD, parabolic DD, constant DD surface, and linear DD surface elements. The formulations are incorporated into FROCK, a hybridized boundary element method code, and are validated by providing comparisons between the results from FROCK and the finite element code ABAQUS. A limited parametric analysis shows the effects of slight anisotropy on the stress field around the tip of a crack and of the orientation of the crack with respect to the axes of elastic symmetry. Copyright © 2014 John Wiley & Sons, Ltd.     

From subduction to transform motion: a seabeam survey of the Hellenic trench system

Preliminary results of a multi-narrow beam survey of the Hellenic trench system, in the Eastern Mediterranean, are presented. The southwestern Ionian branch is divided in small basins, partly filled with Pleistocene sediments. The morphology suggests that the basins are deformed by a compressional stress acting roughly perpendicularly to the trench along N50°E. This direction is the direction of the regional slip vector of the shallow thrust-type earthquakes. The structure of the southeastern Pliny-Strabo branch is quite different. Narrow en-e´chelon slots, oriented N40°E, have been mapped within the main troughs oriented N60°E. The regional earthquake slip vector is also oriented along N40°E. We conclude that the Hellenic trench system is an active subduction system, dominated by thrust along the Ionian branch and by transform motion along the Pliny-Strabo branch.     

Surface sealing as influenced by slope angle and position of simulated stones in the top layer of loose sediments

The influence of five different slope angles and two different positions of simulated stones in the top layer of a sandy and a silty sediment on surface sealing intensity is examined in the laboratory. Sealing intensity is assessed by studying changes of percolation rate through a sediment layer with simulated rainfall duration and by measuring cohesion of the 5 mm thick upper sediment layer, a measure of seal strength, by means of a torvane. Slope has a negative influence on sealing intensity. For a constant per cent of simulated stone cover, sealing intensity is lowest in the case of stones placed on the sediment surface compared to the case of stones pushed into the surface layer. Explanations for these findings are given and some implications are further discussed.