Thermochemistry and melting properties of basalt

The heat capacities of the liquid, glassy and crystalline phases of an alkali basalt have been determined from relative enthalpies measured between 400 and 1,800 K. Values given by available models of calculation generally agree to within 2% of these results. As derived from the new data and the enthalpy of vitrification measured at 973 K by oxide-melt drop solution calorimetry for the same sample, the enthalpy of fusion of this basalt increases from 15.4 kJ/mol at 1,000 K to 33.6 kJ/mol at 1,800 K. Comparisons between the enthalpies of fusion of basalt and model compositions confirm the small magnitude of the enthalpy of mixing between the molten mineral components of the liquids. Minor variations in the chemical composition have only a small effect in the heat capacity and the enthalpy of melting of basalt. The enthalpies of formation at 298 K from the oxides of the crystallized and glass phases of this alkali basalt are −112.2 and −98.5 kJ/mol, respectively, for a gram formula weight based on one mole of oxide components.     

U–Pb and Hf isotopic study of zircons from migmatised amphibolites in the Cathaysia Block: Implications for the early Paleozoic peak tectonothermal event in Southeastern China

Amphibolites occur in a number of localities in the Cathaysia Block, some of them have been migmatised and their protoliths represent basaltic magmas erupted in various tectonic settings. Four migmatised amphibolites were collected from Jiangxi and Fujian Provinces. Cathodo-luminescence images of zircons extracted from the representative amphibolites show unzoned or sector-zoned structure. LA-ICP-MS analysis indicates that most zircons have high Th/U ratios and yield U–Pb zircon ages of 446 ± 5, 435 ± 2, 434 ± 4 and 423 ± 2 Ma, respectively. Lu–Hf isotopic analysis on these zircons gives Hf model ages ranging from 900 to 1200 Ma. Based on lithological observations and previously published geochronological data, we interpret that these U–Pb ages record an important tectonothermal event that led to the migmatization. This early Paleozoic (Caledonian) tectonothermal event in the Southeastern China has a great tectonic implication for the evolutionary history of the Cathaysia Block.     

Investigating the swelling pressure of highly compacted bentonite/sand mixtures under constant-volume conditions

Acta Geotechnica - Compacted bentonite/sand mixtures are often considered as sealing/backfilling materials in deep geological disposal for radioactive waste. This study investigates the swelling...     

Early Estimation of Seismic Hazard for Strong Earthquakes in Taiwan

A shakemap system providing rapid estimates of strong ground shaking could be useful for emergency response providers in a damaging earthquake. A hybrid procedure, which combines site-dependent ground motion prediction models and the limited observations of the Real-Time Digital stream output system (RTD system operated by Central Weather Bureau, CWB), was set up to provide a high-resolution shakemap in a near-real-time manner after damaging earthquakes in Taiwan. One of the main factors that affect the result of ground motion prediction analysis is the existence of site effects. The purpose of this paper is to investigate the local site effects and their influence in the ground shaking and then establish an early estimation procedure of potential hazard for damaging earthquakes. Based on the attenuation law, the site effects of each TSMIP station are discussed in terms of a bias function that is site and intensity-level dependent function. The standard deviation of the site-dependent ground motion prediction model can be significantly reduced. The nonlinear behavior of ground soil is automatically taken into account in the intensity-level dependent bias function. Both the PGA and the spectral acceleration are studied in this study. Based on the RTD data, event correctors are calculated and applied to precisely estimate the shakemap of damaging earthquakes for emergency response.     

Définition et datation de la Formation de Venaco (Corse) : dépôt d’origine gravitaire d’âge Priabonien

Priabonian age is highlighted for the first time in Corsica in the Venaco Formation using the presence of specific microfauna (in particular some representatives of Turborotalia cerroazulensis lineage). This silicoclastic formation is mainly represented by coarse facies. It is composed of three members from south to north and from oldest towards youngest: member of Uboli, Cardo and Orsu. The sedimentologic analysis reveals a gravity depositional environment, involving different type of currents. Sedimentologic and chronologic characteristics make the Venaco Formation and the Annot Formation (p.p.) equivalent. Dating the Venaco Fm. brings confirmation that the green schist metamorphism of the Variscan batholith and the related deformation are from the pre-Priabonian period.     

Modeling the 2D behavior of dry‐stone retaining walls by a fully discrete element method

The dry‐stone retaining walls (DSRW) have been tipped as a promising solution for sustainable development. However, before recently, their behavior is relatively obscure. In this study, discrete element method (DEM) approach was applied to simulate the plane strain failure of these walls. A commercial DEM package (PFC2D™) was used throughout this study. The authors used a fully discrete approach; thus, both the wall and the backfill were modeled as discrete elements. The methodology for obtaining the micromechanical parameters was discussed in detail; this includes the three mechanical sub‐systems of DSRWs: wall, backfill and interface. The models were loaded progressively until failure, and then the results were compared with the full‐scale experimental results where the walls were loaded, respectively, with hydrostatic load and backfill. Despite its complexity and its intensive calculation time, DEM model can then be used to validate a more simplified approach. Copyright © 2015 John Wiley & Sons, Ltd.     

Time‐scale analysis in unsaturated porous media under external wave loads

Extreme waves caused by tsunamis and storm surges can lead to soil failures in the near‐shore region, which may have severe impact on coastal environments and communities. Multiphase flows in deformable porous media involve several coupled processes and multiple time scales, which are challenging for numerical simulations. The objective of this study is to investigate the roles of the various processes and their interactions in multiphase flows in unsaturated soils under external wave loading, via theoretical time‐scale analysis and numerical simulations. A coupled geomechanics–multiphase flow model based on conservation laws is used. Theoretical analysis based on coupled and decoupled models demonstrates that transient and steady‐state responses are governed by pore pressure diffusion and saturation front propagation, respectively, and that the two processes are essentially decoupled. Numerical simulations suggest that the compressibility of the pore fluids and the deformation of the soil skeleton are important when the transient responses of the media are of concern, while the steady‐state responses are not sensitive to these factors. The responses obtained from the fully coupled numerical simulations are explained by a simplified time‐scale analysis based on coupled and decoupled models. Copyright © 2010 John Wiley & Sons, Ltd.     

Fluid composition and evolution in coesite-bearing rocks (Dora-Maira massif,Western Alps): implications for element recycling during subduction

Fluid inclusions and F, Cl concentration of hydrous minerals were analysed in the coesite-pyrope quartzite, the interlayered jadeite quartzite and their country-rock gneiss from the Dora-Maira massif using a combination of microthermometry, Raman spectrometry, synchrotron X-ray microfiuorescence and electron microprobe analysis. Three populations of fluid inclusions were recognized texturally and can be related to distinct metamorphic stages. A low-salinity aqueous fluid occurs in the retrogressed country gneiss and as late secondary inclusions in jadeite quartzite and chloritized pyrope. An earlier secondary population is found in matrix quartz of the jadeite- and pyro-pe-quartzites. This population can be related to the early decompression and so to incipient breakdown of garnet into phlogopite-bearing assemblages. The inclusion fluid is highly saline (up to 84 wt% equivalent NaCl) and contains Na, Ca, Fe, Cu and Zn as major cations. In pyrope quartzite, additional K was found in these brines, which locally coexist with CO₂-rich inclusions. The oldest fluid inclusions are preserved in kyanite grains included in fresh pyrope and in pyrope itself. In pyrope, all inclusions have decrepitated and contain magnesite, an Mg-phosphate, sheet-silicate(s), a chloride and an opaque phase, with no fluid preser ved. In contrast, the kyanite inclusions in pyrope preserve primary H₂O-CO₂ low-salinity fluid inclusions, probably owing to the low compressibility of the kyanite inclusions and host garnet. In spite of in-situ re-equilibration, these inclusions can be interpreted as relics of the dehydration fluid that attended pyrope growth. These correlations between textural and chemical fluid inclusion data and metamorphic stages are consistent with the fluid composition calculated from the halogen content of different generations of phlogopite and biotite. The preservation of different fluid compositions, both in time and space, is evidence for local control and possibly origin of the fluids, in agreement with isotopic data. These results, in particular the absence of CO₂ in the jadeite quartzite, are best interpreted in terms of a fluid-melt system evolution. With increasing metamorphism, partitioning of H₂O, Na, Ca, Fe and heavy metals into melt (jadeite quartzite) and Mg, Na/K, F, CO₂ and P(?) into a residual aqueous fluid can account for depletion in Na, Ca and Fe of the pyrope quartzite. During the retrograde path, a _{H 2 O} rose as melt crystallized, generating the two populations of hypersaline and water-rich fluids that were highly reactive to pyrope. The process of fluid-melt interaction envisioned here coupled with models of melt extraction in subduction zones provides an attractive opportunity for the instantaneous ( < 1 Ma) and selective transport of elements between a downgoing slab and the overlying mantle wedge.     

The challenge of dating early pleistocene fossil teeth by the combined uranium series–electron spin resonance method: the Venta Micena palaeontological site (Orce,Spain)

The palaeontological site of Venta Micena (Orce, Andalusia, Spain) lies in the eastern sector of the Guadix–Baza basin, one of the best documented areas in Europe for Plio‐Pleistocene biostratigraphy. The combination of biochronological and palaeomagnetic results, combined with the radiometric data obtained for Atapuerca Sima del Elefante, indicated that the Venta Micena stratum was formed between the Jaramillo and Olduvai palaeomagnetic events, most likely between 1.22 and 1.77 Ma. Five fossil teeth from two outcrops (sites A and B) were selected to assess the potential of combined uranium series–electron spin resonance (US‐ESR) dating of Early Pleistocene sites. Although the US‐ESR results of the first outcrop showed a large scatter between the three teeth, the mean age of 1.37 ± 0.24 Ma can be considered a reasonable age estimate for Venta Micena. The mean ESR age of 0.62 ± 0.03 Ma obtained for site B seems to be a severe underestimation when compared with the independent age control. This underestimation is attributed to a relative recent U‐mobilization event that led to some U‐leaching. The results show that any ESR age calculations of old samples are extremely sensitive to variations in the measured ²³⁰Th/²³⁴U ratios in dental tissues. Although the results demonstrate that ESR can in principle be applied to Early Pleistocene sites, they also reveal the complexity of dating such old teeth. It is necessary to continue research in several directions, such as study of the behaviour of ESR signals in old teeth and understanding recent U‐mobilization processes, to improve the reliability of the combined US‐ESR dating method applied to Early Pleistocene times, a period for which the number of available numerical dating techniques is very limited. Copyright © 2011 John Wiley & Sons, Ltd.     

Magnesium isotope systematics of the lithologically varied Moselle river basin, France

Magnesium and strontium isotope signatures were determined during different seasons for the main rivers of the Moselle basin, northeastern France. This small basin is remarkable for its well-constrained and varied lithology on a small distance scale, and this is reflected in river water Sr isotope compositions. Upstream, where the Moselle River drains silicate rocks of the Vosges mountains, waters are characterized by relatively high ⁸⁷Sr/⁸⁶Sr ratios (0.7128-0.7174). In contrast, downstream of the city of Epinal where the Moselle River flows through carbonates and evaporites of the Lorraine plateau, ⁸⁷Sr/⁸⁶Sr ratios are lower, down to 0.70824.Magnesium in river waters draining silicates is systematically depleted in heavy isotopes (δ²⁶Mg values range from −1.2 to −0.7‰) relative to the value presently estimated for the continental crust and a local diorite (−0.5‰). In comparison, δ²⁶Mg values measured in soil samples are higher (∼0.0‰). This suggests that Mg isotope fractionation occurs during mineral leaching and/or formation of secondary clay minerals. On the Lorraine plateau, tributaries draining marls, carbonates and evaporites are characterized by low Ca/Mg (1.5-3.2) and low Ca/Sr (80-400) when compared to local carbonate rocks (Ca/Mg = 29-59; Ca/Sr = 370-2200), similar to other rivers draining carbonates. The most likely cause of the Mg and Sr excesses in these rivers is early thermodynamic saturation of groundwater with calcite relative to magnesite and strontianite as groundwater chemistry progressively evolves in the aquifer. δ²⁶Mg of the dissolved phases of tributaries draining mainly carbonates and evaporites are relatively low and constant throughout the year (from −1.4‰ to −1.6‰ and from −1.2‰ to −1.4‰, respectively), within the range defined for the underlying rocks. Downstream of Epinal, the compositions of the Moselle River samples in a δ²⁶Mg vs. ⁸⁷Sr/⁸⁶Sr diagram can be explained by mixing curves between silicate, carbonate and evaporite waters, with a significant contribution from the Vosgian silicate lithologies (>70%). Temporal co-variation between δ²⁶Mg and ⁸⁷Sr/⁸⁶Sr for the Moselle River throughout year is also observed, and is consistent with a higher contribution from the Vosges mountains in winter, in terms of runoff and dissolved element flux. Overall, this study shows that Mg isotopes measured in waters, rocks and soils, coupled with other tracers such as Sr isotopes, could be used to better constrain riverine Mg sources, particularly if analytical uncertainties in Mg isotope measurements can be improved in order to perform more precise quantifications.