Stream channel erosion in a rapidly urbanizing region of the US–Mexico border: documenting the importance of channel hardpoints with Structure‐from‐Motion photogrammetry

Urbanization can lead to accelerated stream channel erosion, especially in areas experiencing rapid population growth, unregulated urban development on erodible soils, and variable enforcement of environmental regulations. A combination of field surveys and Structure‐from‐Motion (SfM) photogrammetry techniques was used to document spatial patterns in stream channel geometry in a rapidly urbanizing watershed, Los Laureles Canyon (LLCW), in Tijuana, Mexico. Ground‐based SfM photogrammetry was used to map channel dimensions with 1 to 2 cm vertical mean error for four stream reaches (100–300 m long) that were highly variable and difficult to survey with a differential GPS. Regional channel geometry curves for LLCW had statistically larger slopes and intercepts compared with regional curves developed for comparable, undisturbed reference channels. Cross‐sectional areas of channels downstream of hardpoints, such as concrete reaches or culverts, were up to 64 times greater than reference channels, with enlargement persisting, in some cases, up to 230 m downstream. Percentage impervious cover was not a good predictor of channel enlargement. Proximity to upstream hardpoint, and lack of riparian and bank vegetation paired with highly erodible bed and bank materials may account for the instability of the highly enlarged and unstable cross‐sections. Channel erosion due to urbanization accounts for approximately 25–40% of the total sediment budget for the watershed, and channel erosion downstream of hardpoints accounts for one‐third of all channel erosion. Channels downstream of hardpoints should be stabilized to prevent increased inputs of sediment to the Tijuana Estuary and local hazards near the structures, especially in areas with urban settlements near the stream channel. Copyright © 2017 John Wiley & Sons, Ltd.     

SHRIMP U–Pb ages of detrital zircons from the Early Cretaceous Nakdong Formation,South East Korea: Timing of initiation of the Gyeongsang Basin and its provenance

To constrain the depositional age of the lowermost Nakdong Formation in the Early Cretaceous Gyeongsang Basin, SHRIMP U–Pb age determination was carried out on zircon separates. The U–Pb compositions of detrital zircons from the Nakdong Formation yield a wide range of ages from the Archean to the Cretaceous but show a marked contrast in age distribution according to the geographical locations within the basin. The provenance of the southern Nakdong Formation is dominantly the surrounding Yeongnam Massif, which is composed of Paleoproterozoic metamorphic rocks and Triassic to Jurassic plutonic rocks, whereas the central to northern Nakdong Formation records significant sediment derivation from the Okcheon Metamorphic Belt, which is distributed to the northwest, in addition to the contribution from the Yeongnam Massif. It is suggested that the maximum depositional age of the Nakdong Formation is ca 127 Ma, based on its youngest detrital zircon age population. The onset of its deposition at 127 Ma coincided with the tectonic inversion in East Asia from a compressional to an extensional geodynamic setting, probably due to the contemporaneous change in the drift direction of the Izanagi Plate and its subsequent oblique subduction.     

One Million Years tephra record at IODP Sites U1436 and U1437: Insights into explosive volcanism from the Japan and Izu arcs

The 1 Myr tephra records of IODP (International Ocean Discovery Program) Holes U1436A and U1437B in the Izu‐Bonin fore‐ and reararc were investigated in order to assess provenance and eruptive volumes, respectively. In total, 304 tephra samples were examined and 260 primary tephra layers were identified. Tephra provenance was determined by means of major and trace element compositions of glass shards and distinguished between Japan and Izu‐Bonin arc origin of the tephra layers. A total of 33 marine tephra compositions were correlated to the Japan arc and 227 to the Izu arc. Twenty marine tephra layers were correlated between the two drilling sites. Additionally, we defined eleven correlations of marine tephra deposits to major widespread Japanese eruptions; from the 1.05 Ma Shishimuta‐Pink Tephra to the 30 ka Aira‐Tn Tephra, both from Kyushu Island. These eruptions provide independent time markers within the sediment record and six correlations were used to date tephra layers from Japan in Hole U1436A to establish an alternative age model for this hole. Furthermore, the minimum distal tephra volumes of all detected events were calculated, which enabled the comparison of the tephra volumes that derived from the Japan and the Izu‐Bonin arcs. For some of the major Japanese eruptions these are the first volume estimations that also include distal deposits. All of the Japanese tephras derived from events with eruption magnitude M_v ≥ 5.6 and three of the investigated eruptions reach magnitudes M_v ≥ 7. Volcanic events of the Izu‐Bonin arc have mostly eruption magnitudes M_v ≤ 5.     

Probabilistic seismic hazard assessment for South-Eastern France

The accurate evaluation and appropriate treatment of uncertainties is of primary importance in modern probabilistic seismic hazard assessment (PSHA). One of the objectives of the SIGMA project was to establish a framework to improve knowledge and data on two target regions characterized by low-to-moderate seismic activity. In this paper, for South-Eastern France, we present the final PSHA performed within the SIGMA project. A new earthquake catalogue for France covering instrumental and historical periods was used for the calculation of the magnitude-frequency distributions. The hazard model incorporates area sources, smoothed seismicity and a 3D faults model. A set of recently developed ground motion prediction equations (GMPEs) from global and regional data, evaluated as adequately representing the ground motion characteristics in the region, was used to calculate the hazard. The magnitude-frequency distributions, maximum magnitude, faults slip rate and style-of-faulting are considered as additional source of epistemic uncertainties. The hazard results for generic rock condition (Vs30 = 800 m/s) are displayed for 20 sites in terms of uniform hazard spectra at two return periods (475 years and 10,000 years). The contributions of the epistemic uncertainties in the ground motion characterizations and in the seismic source characterization to the total hazard uncertainties are analyzed. Finally, we compare the results with existing models developed at national scale in the framework of the first generation of models supporting the Eurocode 8 enforcement, (MEDD 2002 and AFPS06) and at the European scale (within the SHARE project), highlighting significant discrepancies at short return periods.     

Seismic electric signals in seismic prone areas

The Varotsos-Alexopoulos-Nomicos(VAN) method of short-term earthquake prediction was introduced in the 1980s. The VAN method enables estimation of the epicenter, magnitude and occurrence time of an impending earthquake by observing transient changes of the electric field of the Earth termed seismic electric signals(SES). Here, we present a few examples of SES observed in various earthquake prone areas worldwide.     

Comparative Assessment of Sludge Pre‐Treatment Techniques to Enhance Sludge Dewaterability and Biogas Production

Effectiveness of ultrasonication, microwave technologies, and enzyme addition prior to anaerobic digestion is investigated using sludge samples taken from the secondary settling tank of a domestic wastewater treatment plant to improve methane production, enhance dewaterability characteristics of the sludge, and to reduce excess sludge. Microwave pre‐treatment (1500 W, 10 min at 175 °C) results in better extra digester performance (compared to the control reactor) in terms of methane production (25 m³ ton^?1 suspended solids (SS)) than ultrasound (no improvement) and enzyme pre‐treatment (11 m³ ton^?1 SS). While methane production is not improved as a result of ultrasonication pre‐treatment (15 000 kJ kg^?1 SS), a noticeable increase (19%) is observed in the case of microwave pre‐treatment. Higher compactibility values are obtained after ultrasonication and microwave application compared to the control (i.e., from 7.1 to 8.7 and 9.2%, respectively) before anaerobic digestion. Although ultrasonication and microwave application decrease the dewaterability of the raw sludge (capillary suction time (CST) from 827 to 1364 and 2290 s, respectively), similar dewaterability results are obtained at the end of the anaerobic digestion process for all pre‐treated sludge samples. An economic assessment of this study shows that pre‐treatment with microwave results in more than 10‐fold less net cost compared to the enzyme application.     

Sorption and Chemical Reactions of PAHs with Dissolved Humic Substances and Related Model Polymers

Sorption coefficients measured for PAHs on dissolved humic substances by SPME and FQT were found to be inevitably different and method‐dependent – SPME provides activity‐based and FQT concentration‐based sorption coefficients. Poly(acrylic acid) esters as well‐defined model polymers were used in sorption experiments, leading to the conclusion that short aliphatic chains are more effective in binding PAHs than aromatic moieties. FQT was inappropriate to measure sorption coefficients for the interaction of pyrene with poly(acrylic acid) esters but the experiments revealed a characteristic shift in the fluorescence spectrum. Using pyrene as a probe for the molecular environment in the sorbed state, the observed spectral shift indicated a highly hydrophobic microenvironment. The empirical relationships between lg K_DOC and lg K_OW were generalized on the basis of a modified Flory‐Huggins concept. Introducing only one sorbent‐specific parameter, the solubility parameter δ_DOM, the calculation of sorption coefficients became possible for a wide range of HOCs using fundamental data readily available from the literature. Long‐term experiments showed that reactive PAHs (such as acenaphthylene and 9‐methylanthracene) are able to react with HAs under strictly abiotic and anoxic conditions, whereas less reactive PAHs (such as naphthalene and dihydroanthracene) do not form bound residues. The HA reveals two functions in the interaction, behaving as a reaction partner and as a protecting ligand.