Evaluation of geochemical impact of tsunami on Pichavaram mangrove ecosystem,southeast coast of India

The 26 December 2004-tsunami has deposited sediments in the Pichavaram mangrove ecosystem, east coast of India. Ten surface and three core sediment samples were collected within 30 days of the event and analyzed for nutrients. Water samples were also analyzed to see the impact of tsunami on the geochemical behavior of nutrients. An increase in the concentration of various nutrients namely nitrate and phosphate was observed. The geochemistry of the mangrove forest was observed to be influenced by a number of factors like rapid increase of aquaculture farms, agricultural practices and the anthropogenic discharge from the nearby-inhabited areas. Further the sediment column was disturbed due to energetic tsunami waves, which has caused a sheer increase in the dissolved oxygen in water. As a result, the change in the redox potential has resulted in change in the nutrients absorbed/associated with the sediments. In addition, role of retreating water after tsunami on the nutrient geochemistry was also evaluated.     

Deciphering potential groundwater zone in hard rock through the application of GIS

Remote Sensing and Geographic Information System has become one of the leading tools in the field of hydrogeological science, which helps in assessing, monitoring and conserving groundwater resources. It allows manipulation and analysis of individual layer of spatial data. It is used for analysing and modelling the interrelationship between the layers. This paper mainly deals with the integrated approach of Remote Sensing and geographical information system (GIS) to delineate groundwater potential zones in hard rock terrain. The remotely sensed data at the scale of 1:50,000 and topographical information from available maps, have been used for the preparation of ground water prospective map by integrating geology, geomorphology, slope, drainage-density and lineaments map of the study area. Further, the data on yield of aquifer, as observed from existing bore wells in the area, has been used to validate the groundwater potential map. The final result depicts the favourable prospective zones in the study area and can be helpful in better planning and management of groundwater resources especially in hard rock terrains.     

Control strategies for the Clam Wave Energy Device

A promising wave energy device being currently investigated is the ‘clam’. The clam extracts energy by pumping air through a specially designed (Wells) turbine. Although operation of the Wells turbine does not require a rectified air flow, some additional control will be necessary to optimize the phase of the clam motion for good efficiencies. An examination of the equation of motion in the time domain suggests the possibility of phase control by mechanical, power take-off, or pneumatic latching. Latching can be shown to increase the efficiency of the device in the longer wavelengths of the wave spectrum, i.e. those of high incident wave power. Equivalently latching could be used to keep the device efficiency high while reducing its size, possibly resulting in cheaper power extraction.     

Wave run-up and overtopping on smooth and rough slopes of coastal structures

A series of hydraulic model tests has been carried out in a glass wave flume to investigate the influences of wave height, wave period, wave steepness, surf similarity parameter, roughness, layer thickness and porosity on wave run-up and overtopping of 1:2 sloped impermeable and permeable breakwaters fronted by a 1:10 gentle, smooth beach slope. The analysis of results involves the correlation between the overtopping energy transfer with the relative wall height and the relationship between wave run-up and overtopping rate. Further, measured wave run-up and overtopping rates are compared with the results given in the Shore Protection Manual (1984), Automated Coastal Engineering System (1992)and results of other investigators.     

Wave forces on submarine pipelines near a plane boundary

Forces induced by regular waves on submarine pipelines resting on as well as near a plane boundary and aligned parallel to wave fronts of the oncoming waves are investigated experimentally. The inline hydrodynamic coefficients of drag and inertia are evaluated through the use of Morison equation and the least squares method. The transverse force is analysed in terms of maximum transverse force and transverse root mean square (r.m.s.) coefficients. The resulting inline and transverse hydrodynamic coefficients are correlated with the period parameter or Keulegan-Carpenter number and relative clearance of the pipeline from the plane boundary. The effect of depth parameter on these coefficients and the correlation between maximum transverse force and transverse r.m.s. coefficients are also reported.     

Impact of Satellite Altimetry on Simulations of Sea Level Variability by an Indian Ocean Model

This article describes the impact of satellite altimeter data on the simulations of sea level variability (SLV) by a nonlinear reduced gravity model of the entire Indian Ocean. The model has been forced by 6-hourly analyzed wind stress data containing SSM/I observations and has been able to produce realistic circulation features. However, SLV values observed by Topex/Poseidon altimeter do not fit these simulations because of imperfect initial data. Hence an attempt has been made to initialize the model using altimeter data. The initialized model-generated SLVvalues have been compared with SLV derived by altimeter for monsoon as well as nonmonsoon months of 1996. Experimental runs have been performed for 10 days, 20 days, and one month. It has been found that the initialized model results on the final day of these experiments are in very good agreement with altimeter data of the same day. It is thus possible, in principle, to hindcast and forecast sea level variations in the time scale of 10 days to one month with the availability of good quality wind data for forcing the model and altimeter observations of sea level for initializing it.     

Estimation of Uplift Capacity of Rapidly Loaded Plate Anchors in Soft Clay

Plate anchors are extensively used in civil engineering constructions as they provide an economical alternative to gravity and other embedded anchors. The rate of loading is one of the important factors that affects the magnitude of soil resistance as well as soil suction force. This article outlines the effect of pullout rate on uplift behavior of plate anchors (70 mm diameter) buried in soft saturated clay by varying the pullout rate from 1.4 mm/min to 21.0 mm/min. The variation of breakout force and suction force with embedment depth and rate of pull are presented. A correlation between the rate of increase of undrained strength of clay and anchor capacity with rate of strain has been established. Finally an empirical equation has been proposed that includes the rate of pull in the estimation of breakout capacity of anchors.     

Thermodynamic characterization of the partitioning of iron between soluble and colloidal species in the Atlantic Ocean

Recent electrochemical measurements have shown that iron (Fe) speciation in seawater is dominated by complexation with strong organic ligands throughout the water column and have provided important thermodynamic information about these compounds. Independent work has shown that iron exists in both soluble and colloidal fractions in the Atlantic Ocean. Here we have combined these approaches in samples collected from a variety of regimes within the Atlantic Ocean. We measured the partitioning of Fe between soluble (< 0.02 μm) and colloidal (0.02 to 0.4 μm) size classes and characterized the concentrations and conditional stability constants of Fe ligands within these size classes. Results suggest that equilibrium partitioning of Fe between soluble and colloidal ligands is partially responsible for the distribution of Fe between soluble and colloidal size classes. However, a significant fraction of the colloidal Fe was inert to ligand exchange as soluble Fe concentrations were generally lower than values predicted by a simple equilibrium partitioning model.In surface waters, strong ligands with conditional stability constants of 10¹³ relative to total inorganic Fe appeared to dominate speciation in both the soluble and colloidal fractions. In deep waters these ligands were absent, and instead we found ligands with stability constants 12–15 fold smaller that were predominantly in the soluble pool. Nevertheless, significant levels of colloidal Fe were found in these samples, which we inferred must be inert to coordination exchange.     

Probable gas hydrate/free gas model over western continental margin of India

Multi-channel seismic reflection data from the western continental margin of India (WCMI) have been analyzed to construct a plausible model for gas hydrate formation. A reflector at 2950 ms two way travel time (TWT) on one of the sections is interpreted to represent the base of the layer of the methane hydrate, identified by a bottom simulating reflector (BSR) that lies almost 500 ms beneath the sea floor. BSRs of similar origin are common world wide, where they are usually interpreted to mark the base of gas hydrate bearing clastic sediment, with or without underlying free gas. In this study we present a model with the contrasting physical properties that produce synthetic wavelets that match with the observed BSR amplitude and waveforms for varying source-receiver offsets of multi-channel seismic reflection data. The preliminary results presented here put important constraints on models that predict the distribution and formation of hydrate. Offset-dependent amplitude recovery also gives an appropriate response for hydrate characterization.     

Significance of pteropods in deciphering the late Quaternary sea-level history along the southwestern Indian shelf

The paper evaluates the usefulness of pteropods in palaeobathymetric synthesis along the southwestern continental shelf of India. Core samples collected from the shelf off north Kerala (SW coast of India) were studied for faunal assemblages (pteropods and foraminifers), calcium carbonate contents and lithological characteristics. A fundamental precept for considering any organism as a bathometer is that it should be highly sensitive to changing water depths. To ascertain this, the bathymetric distribution patterns of modern pteropods as well as planktonic and benthic foraminifers were recorded in core-top samples. The results reveal that certain pteropod species (Limacina inflata, Creseis acicula, Creseis virgula, and Creseis chierchiae) are highly depth sensitive. The response of these species to depth changes was assessed in terms of the L. inflata and Creseis spp. abundance ratio. A model for the relationship between water depths and the L. inflata/Creseis spp. ratio is proposed for the southwestern shelf of India. Variations of benthic/planktonic foraminifers (BF/PF) and pteropods/planktonic foraminifers (Pt/PF) in the modern sediments were also found to be depth controlled. Two sediment cores, representing the last 36,000 and 23,000 years, were collected to investigate past sea-level changes. These cores comprised two distinct lithological units, the upper unit corresponding to the Holocene, and the lower unit to the last glacial period. The L. inflata/Creseis spp. model was successfully applied to the fossil record for reconstructing the palaeobathymetry of the shelf study locations. Down-core variations in the BF/PF and Pt/PF ratios support these inferred sea-level changes. Major periods of sea-level oscillations were also found to have a strong influence on the calcium carbonate distribution. For both core sites, the palaeobathymetric curves reflect consistency in terms of changing sea level. The results suggest that the sea level stood around 100 m below the present mean sea level during the last glacial maximum. A rapid rise in sea level was documented between 15 and 10 ka B.P. The sea-level rise has been slower since 7 ka B.P.