Near Infrared Spectra of two Asteroids with low Tisserand Invariant

We present near infrared reflectance spectra from 0.8 to 2.5 μm of two asteroids with low Tisserand invariant, 1373 Cincinnati and 2906 Caltech. We compare our spectra with cometary nuclei and other asteroids in their class. Asteroids Cincinnati and Caltech have Tisserand invariant values of 2.72 and 2.97, respectively, values less than 3 are considered suggestive of cometary origin. The observed spectral slopes in the near-infrared are consistent with both the spectra of cometary nuclei and of primitive asteroids. However, both asteroids have features in the near-infrared that are not seen in cometary nuclei, but are present in other X-type asteroids. 1373 Cincinnati has a sharp slope change between 0.75 and 1.0 μm and 2906 Caltech has a broad and shallow absorption between 1.35 and 2.2 μm. Our attempts to model the visible and near-infrared spectrum of these two objects, with the components successfully used by Emery and Brown (2004, Icarus 164, 104–121) to fit Trojan asteroids, did not yield acceptable fits.Visiting Astronomer at the Infrared Telescope Facility, which is operated by the University of Hawaii under contract to the National Aeronautics and Space Administration.     

Tier-based approaches for landslide susceptibility assessment in Europe

In the framework of the European Soil Thematic Strategy and the associated proposal of a Framework Directive on the protection and sustainable use of soil, landslides were recognised as a soil threat requiring specific strategies for priority area identification, spatial hazard assessment and management. This contribution outlines the general specifications for nested, Tier-based geographical landslide zonings at small spatial scales to identify priority areas susceptible to landslides (Tier 1) and to perform quantitative susceptibility evaluations within these (Tier 2). A heuristic, synoptic-scale Tier 1 assessment exploiting a reduced set of geoenvironmental factors derived from common pan-European data sources is proposed for the European Union and adjacent countries. Evaluation of the susceptibility estimate with national-level landslide inventory data suggests that a zonation of Europe according to, e.g. morphology and climate, and performing separate susceptibility assessments per zone could give more reliable results. To improve the Tier 1 assessment, a geomorphological terrain zoning and landslide typology differentiation are then applied for France. A multivariate landslide susceptibility assessment using additional information on landslide conditioning and triggering factors, together with a historical catalogue of landslides, is proposed for Tier 2 analysis. An approach is tested for priority areas in Italy using small administrative mapping units, allowing for relating socioeconomic census data with landslide susceptibility, which is mandatory for decision making regarding the adoption of landslide prevention and mitigation measures. The paper concludes with recommendations on further work to harmonise European landslide susceptibility assessments in the context of the European Soil Thematic Strategy.     

Upper Cretaceous marine‐continental transition (Leonese Area,NW Spain) defined from integrated outcrop and seismic stratigraphy

The Upper Cretaceous succession of the Leonese Area (NW Spain) comprises mixed clastic and carbonate sediments. This succession is divided into two lithostratigraphic units, the Voznuevo Member and the Boñar Formation, which represent fluvial, shoreface, intertidal, subtidal and open‐shelf sedimentary environments. Regional seismic interpretation and sequence stratigraphic analysis have allowed the study of lateral and vertical changes in the sedimentary record and the definition of third‐order levels of stratigraphic cyclicity. On the basis of these data, the succession can be divided into two second‐order depositional sequences (DS‐1 and DS‐2), incorporating three system tracts in a lowstand to transgressive to highstand system tract succession (LST–TST–HST). These sequences are composed of fluvial systems at the base with palaeocurrents that flowed westward and south‐westward. The upper part of DS‐1 (Late Albian–Middle Turonian) shows evidence of intertidal to subtidal and offshore deposits. DS‐2 (Late Turonian–Campanian) comprises intertidal to subtidal, tidal flat, shallow marine and lacustrine deposits and interbedded fluvial deposits. Two regressive–transgressive cycles occurred in the area related to eustatic controls. The evolution of the basin can be explained by base‐level changes and associated shifts in depositional trends of successive retrogradational episodes. By using isobath and isopach maps, the main palaeogeographic features of DS‐1 and DS‐2 were constrained, namely coastline positions, the existence and orientation of corridors through which fluvial networks were channelled and the location of the main depocentres of the basin. Sedimentation on the Upper Cretaceous marine platform was mainly controlled by (i) oscillations of sea level and (ii) the orientation of Mesozoic faults, which induced sedimentation along depocentres. Copyright © 2013 John Wiley & Sons, Ltd.     

Temporal variability of Pb fluxes and bioturbation in shelf sediments beneath the high primary production area off Concepción, central-southern Chile (36°S)

We estimated monthly fluxes of ²¹⁰Pb in shelf sediments beneath a high productivity area off central-southern Chile (36°S) during 1 year (September 2002-August 2003). Sediment cores were obtained using a multiple corer and were analyzed mainly for ²¹⁰Pb, total pigments, and macrofauna abundance. The ²¹⁰Pb inventories and fluxes were estimated for surface sediments (0-5 cm) and bioturbation coefficients were inferred using chlorophyll-a (reactive) profiles. In general, ²¹⁰Pb content was inversely correlated with phytodetritus fluxes. High photosynthetic pigment contents in surface sediments were consistently associated with lower ²¹⁰Pb contents. Macrofaunal activity responded to oxygen and organic matter supplies at the sediment surface, generally concentrated in the first centimeters, but particularly so during months of high organic matter fluxes and deficient bottom water oxygen conditions. At this study site, several processes involved in the ²¹⁰Pb surface distribution make it difficult to accurately estimate ages at the surface. We postulate that the organic fluxes promote changes in the faunal activity, which, in combination with sediment resuspension and water circulation over the shelf, produce seasonal variations in the ²¹⁰Pb inventories.     

Talc mineralisation associated with soft hematite ore, Gongo Soco deposit, Minas Gerais, Brazil: petrography, mineral chemistry and boron-isotope composition of tourmaline

Talc mineralisation occurs as hematite–talc schist between soft hematite ore and dolomitic itabirite at Gongo Soco, Quadrilátero Ferrífero of Minas Gerais, Brazil. The hematite–talc schist and soft hematite have a prominent tectonic foliation of tabular hematite. Tabular hematite without preferential orientation is superimposed on the tectonic foliation. The talcose schist is enriched in F and has a constant Fe/S ratio. Electron-microprobe analyses indicate trace amounts of S in different generations of hematite. The whole-rock Fe/S ratio possibly represents sulfate S from hematite-hosted fluid inclusions. Fluid inclusions in foliation-overprinting hematite and chlorite geothermometry from talcose rocks suggest, respectively, temperatures from <200°C to ~300°C. Tourmaline, a rarely observed mineral in the hematite–talc schist, belongs to the alkali group and falls in the dravite compositional field. Boron-isotope determinations of tourmaline crystals, using secondary ion mass spectrometry, vary from −20‰ to −12‰ δ¹¹B. This compositional isotopic range and the tourmaline chemical composition suggest a meta-evaporitic origin. A non-marine evaporitic setting is the most likely source of acidic, highly oxidising fluids, which resulted in the abundant F-bearing talc and the presence of otherwise immobile Ti in hematite. Oxidising brines were channelled along shear zones and converted dolomitic itabirite into the Gongo Soco soft hematite and the talc mineralisation. The latter is envisaged as the hydrothermal wall-rock alteration of dolomitic itabirite, which gave rise to the soft hematite ore.     

200 years of mining activities at La Paz/San Luis Potosí/Mexico - Consequences for environment and geochemical exploration

The Ag---Pb---Zn---Cu---Au mining district of Santa María de La Paz has been extensively exploited for approximately 200 years. Consequences of these activities are several deposits of tailings with high As and heavy metal concentrations, which are completely unstable. The climate is semiarid and as the dumps have no protective cover, material from the dumps is dispersed by strong winds. It is also washed out during seasonally heavy rainfalls. By these processes approximately 100 km² of surrounding have been contaminated by dump material. The As and heavy metal content of the soils was determined as well as their level in crops (Zea Maize) from agricultural lands in the vicinity of the dumps. In the direction of prevailing winds concentrations up to 1000 ppm Zn, 400 ppm Pb, 16 ppm Cd, 550 ppm Cu and 300 As have been detected in top soils. Using fuzzy cluster analysis the different contamination sources could be identified. Grains of corn from contaminated sites showed no critical concentrations, but leaves which are also used tor fodder, have As-concentrations up to 20 ppm.     

Factors influencing the presence or absence of tributary-junction fans in the Iberian Range, Spain

This paper analyses the factors which influence the presence or absence of tributary-junction fans in the Iberian Range, northern Spain. Two valleys were selected, both characterised by wide variations in lithology, altitude, land use and plant cover. Two groups of factors were studied: those related to the internal characteristics of the drainage basins, which particularly control sediment generation; and those related to the characteristics of the depositional area which control accommodation space and main river power. Among the internal factors, the development of alluvial fans was related to: (i) the capacity of the basin to yield large volumes of sediment, (ii) the occurrence of intense human pressure until recent times, a good indicator of sediment yield, and (iii) the capacity of the basin to quickly increase discharge during rainstorms (discharge density and torrentiality). It is suggested that the areas that were intensively cultivated in the past, and have therefore been affected by intense erosion, have played a decisive role on the development of alluvial fans. This would imply that many of these alluvial fans have a relatively recent origin, perhaps related to the beginning of a widespread deforestation. The basins without alluvial fans are characterised by relatively steep hillslope gradients (that is, slopes that never were subjected to historical cultivation), low drainage densities and dense forest and shrub cover, mostly coinciding with high altitude basins composed of quartzite and shale bedrocks. Regarding the external factors, the shape, size and longitudinal gradient of the main river to which the fans are tributary are the most relevant conditioning factors determining the development of alluvial fans.     

Tectonic implications of the earthquake swarm of 1997 in the Michoacan Triangle, Mexico

An earthquake swarm occurred during February and March 1997 in the vicinity of the Tancitaro Volcano, in the southern part of the tectonically complex Michoacan Triangle. A study of these events provides an opportunity to map the active faults in the area and to learn if the orientation and the sense of motion on these faults are consistent with the mapped faults and the alignment of cinder cones in the region. The foci of 230 earthquakes, which could be located, are distributed between 10 and 18 km depth, and show an alignment in, roughly, a NE direction. The focal mechanisms and seismic moments of the 27 best-recorded events were determined by waveform modeling of P and S waves. These mechanisms show two distinct patterns. More than 50% of the solutions are left-lateral strike–slip mechanisms with a normal component. The preferred fault plane strikes NE. Another group of events, probably caused by triggered seismicity on the Chapala–Oaxaca fault zone, shows left-lateral strike–slip mechanisms with a large-thrust component on NW-trending faults. S wave splitting shows 1–2.5% crustal-anisotropy. The direction of the anisotropy coincides with the NE alignment of events, and the preferred nodal plane. This is also the alignment of cinder cones, suggesting that preexisting fractures and cracks are responsible for the seismicity and anisotropic behavior of the crust. The resulting stress orientation, NE compression, is the one expected for the fore-arc region. We conclude that although Michoacan Triangle lies in the Trans-Mexican Volcanic Belt, it does not form part of this stress province where the stress orientation is NS extension.     

Changes in heat wave characteristics over Extremadura (SW Spain)

Theoretical and Applied Climatology - Heat wave (HW) events are becoming more frequent, and they have important consequences because of the negative effects they can have not only on the human...