A simplified analytical model for run-out prediction of flow slides in municipal solid waste landfills

Flow slides in municipal solid waste (MSW) landfills are common geoenvironmental issues in the urban environment and can pose a serious threat to the surrounding population and infrastructure. Prediction of the maximum run-out distance of flow slides in MSW landfills is therefore an essential part of hazard and risk assessment in engineering design. Based on the framework for simple analysis originally developed by Hungr (1995), we propose a simplified analytical model for calculating dam breaks in a plastic fluid along a single inclined base. In the proposed model, a quarter-elliptical shape is used to describe the approximate configuration of the flow slide. Following this step, the physical laws relating to the conservation of mass and energy are used to calculate the potential flow. Of additional note is a boundary condition in mathematics relating to this simplified analytical model, which is also reported in this study. Taking the obvious mobility characteristics of the MSW at point of failure into consideration, a three-phase simplified model along double inclined bases has been further developed for run-out prediction of the flow slide in MSW landfill. The proposed three-phase model is then applied to estimate the maximum run-out distance of two typical flow failures of landfills located in Sarajevo and Bandung, which demonstrate the capability of the proposed simplified analytical model for use in hazard assessments of landfills.     

Influence of Mussel Culture on the Vertical Export of Phytoplankton Carbon in a Coastal Upwelling Embayment (Ría de Vigo,NW Iberia)

The goal of this paper is to find out whether suspended mussel culture affects the vertical fluxes of biogenic particles in the Ría de Vigo on a seasonal scale. With this aim, vertical fluxes of particulate organic carbon (POC) and the magnitude and composition of vertical export of phytoplankton carbon (Cphyto) collected in sediment traps were examined by comparing data obtained inside a mussel farming area (RaS) with those found at a reference station (ReS) not affected by mussels. Our results indicate that mussel farming has a strong impact on sedimentation fluxes under the rafts, not only increasing POC flux but also altering the magnitude and composition of Cphyto fluxes. Average POC flux at RaS (2564?±?1936 mg m^?2 day^?1) was four times higher than at ReS (731?±?276 mg m^?2 day^?1), and much of this increase was due to biodeposit fluxes (Cbiodep) which accounted for large proportion of POC flux (35–60 %). Indeed, because of this high Cbiodep flux, only a small proportion of the POC flux was due to Cphyto flux (3–12 %). At the same time, we observed an increased sedimentation of phytoplankton cells at RaS that could be explained by a combination of mechanisms: less energetic hydrodynamic conditions under mussel rafts, ballast effect by sinking mussel feces, and diatom aggregates. Moreover, mussel farming also altered the quality of the Cphyto flux by removing part of the predatory pressure of zooplankton and thus matching diatom composition in water column and sediment traps.     

Impact of lightning on organic matter-rich soils: influence of soil grain size and organic matter content on underground fires

A detailed study was carried out on a piece of land that had been struck by lightning during the violent rainstorm that raged over the Island of S?o Miguel (Azores Archipelago) in late October 2006. Temperature and gas measurements (CO₂, CO, H₂S and CH₄) were performed in four study trenches, dug in an area of ∼3 m², where an underground fire had been initiated by the impact with a lightning stroke, followed by the emission of a column of gases and smoke. The soil under study was originally a well-pedogenized about 80 cm thick bed, made of volcanic clayey to silty tephra fallouts and contained 5.5–9.7% of organic matter. The underground fire was monitored for one week and revealed a peak release of 404 ppm CO and 3.4% CO₂ originating from a horizon located about 45 cm under the soil surface. Measurements of temperature, performed one week after the impact, indicated a maximum value of 326°C inside the soil, while 516.5°C were measured on the surface of a lava block interred about 20 cm under the surface. Subsequently, a stratigraphic and sedimentologic study proved the role of the grain-size of the soil and of the organic matter content of the different horizons of the impact area, in determining the ratio between anoxic/oxidised combustion conditions and in the progress of the process itself. It was also noticed that combustion was not total all over in the soil bed and that the process had slightly migrated toward SW during the observation period. The combustion process went on for about ten days, in spite of several other violent rainstorms, until it was artificially extinguished through the excavations made to obtain study trenches. This particular circumstance evidenced the potential natural hazard represented by this kind of atmospheric event, especially in a land where the volcanic nature of the soil may easily mislead inexperienced observers and, consequently, delay proper action.     

An analytical method to compute comet cloud formation efficiency and its application

A quick analytical method is presented for calculating comet cloud formation efficiency in the case of a single planet or multiple-planet system for planets that are not too eccentric (e _p ≲ 0.3). A method to calculate the fraction of comets that stay under the control of each planet is also presented, as well as a way to determine the efficiency in different star cluster environments. The location of the planet(s) in mass-semi-major axis space to form a comet cloud is constrained based on the conditions developed by Tremaine (1993) together with estimates of the likelyhood of passing comets between planets; and, in the case of a single, eccentric planet, the additional constraint that it is, by itself, able to accelerate material to relative encounter velocity U ~ 0.4 within the age of the stellar system without sweeping up the majority of the material beforehand. For a single planet, it turns out the efficiency is mainly a function of planetary mass and semi-major axis of the planet and density of the stellar environment. The theory has been applied to some extrasolar systems and compared to numerical simulations for both these systems and the Solar System, as well as a diffusion scheme based on the energy kick distribution of Everhart (Astron J 73:1039–1052, 1968). The analytic results are in good agreement with the simulations.     

Comparison of daily and sub-daily SWAT models for daily streamflow simulation in the Upper Huai River Basin of China

Despite the significant role of precipitation in the hydrological cycle, few studies have been conducted to evaluate the impacts of the temporal resolution of rainfall inputs on the performance of SWAT (soil and water assessment tool) models in large-sized river basins. In this study, both daily and hourly rainfall observations at 28 rainfall stations were used as inputs to SWAT for daily streamflow simulation in the Upper Huai River Basin. Study results have demonstrated that the SWAT model with hourly rainfall inputs performed better than the model with daily rainfall inputs in daily streamflow simulation, primarily due to its better capability of simulating peak flows during the flood season. The sub-daily SWAT model estimated that 58 % of streamflow was contributed by baseflow compared to 34 % estimated by the daily model. Using the future daily and 3-h precipitation projections under the RCP (Representative Concentration Pathways) 4.5 scenario as inputs, the sub-daily SWAT model predicted a larger amount of monthly maximum daily flow during the wet years than the daily model. The differences between the daily and sub-daily SWAT model simulation results indicated that temporal rainfall resolution could have much impact on the simulation of hydrological process, streamflow, and consequently pollutant transport by SWAT models. There is an imperative need for more studies to examine the effects of temporal rainfall resolution on the simulation of hydrological and water pollutant transport processes by SWAT in river basins of different environmental conditions.     

Identity of the characteristics of electrodynamic seismographs with non-standard periods of seismometers and galvanometers

Summary The maximum changes of magnification were determined for electrodynamic seismographs with standard characteristics and for some experimental long-period seismographs, the constants of which are given in Tab. 1, when the period of the seismometer or galvanometer has a deviation of not more than 5% from the standard value. Under the assumption of control of the other constants of the seismograph, identical amplitude and phase responses with a small change of the absolute magnification of the seismograph may be achieved with characteristicsAII ( ² >0.2), AIV ( ² 0.4), B ( ² >0.3) Nos28, 32 and33. This deviation can also be compensated by adjusting the optical distance. The procedure of adjusting the identical characteristics is suitable for systems with which an accurate setting of the period is difficult and for systems with an uncontrollable period, provided their values are within the limits of allowed deviations from the standard constants.     

Simplified formulae for designing coastal forest against tsunami run-up: one-dimensional approach

In the present study, laboratory experiments were conducted to validate the applicability of a numerical model based on one-dimensional nonlinear long-wave equations. The model includes drag and inertia resistance of trees to tsunami flow and porosity between trees and a simplified forest in a wave channel. It was confirmed that the water surface elevation and flow velocity by the numerical simulations agree well with the experimental results for various forest conditions of width and tree density. Further, the numerical model was applied to prototype conditions of a coastal forest of Pandanus odoratissimus to investigate the effects of forest conditions (width and tree density) and incident tsunami conditions (period and height) on run-up height and potential tsunami force. The modeling results were represented in curve-fit equations with the aim of providing simplified formulae for designing coastal forest against tsunamis. The run-up height and potential tsunami forces calculated by the curve-fit formulae and the numerical model agreed within ± 10% error.     

3D-Monitoring Big Geo Data on a seaport infrastructure based on FIWARE

Many organizations of all kinds are using new technologies to assist the acquisition and analysis of data. Seaports are a good example of this trend. Seaports generate data regarding the management of marine traffic and other elements, as well as environmental conditions given by meteorological sensors and buoys. However, this enormous amount of data, also known as Big Data, is useless without a proper system to organize, analyze and visualize it. SmartPort is an online platform for the visualization and management of a seaport data that has been built as a GIS application. This work offers a Rich Internet Application that allows the user to visualize and manage the different sources of information produced in a port environment. The Big Data management is based on the FIWARE platform, as well as “The Internet of Things” solutions for the data acquisition. At the same time, Glob3 Mobile (G3M) framework has been used for the development of map requirements. In this way, SmartPort supports 3D visualization of the ports scenery and its data sources.     

The Relegation Algorithm

The relegation algorithm extends the method of normalization by Lie transformations. Given a Hamiltonian that is a power series = ₀+ ₁+ ... of a small parameter , normalization constructs a map which converts the principal part ₀into an integral of the transformed system — relegation does the same for an arbitrary function [G]. If the Lie derivative induced by [G] is semi-simple, a double recursion produces the generator of the relegating transformation. The relegation algorithm is illustrated with an elementary example borrowed from galactic dynamics; the exercise serves as a standard against which to test software implementations. Relegation is also applied to the more substantial example of a Keplerian system perturbed by radiation pressure emanating from a rotating source.This revised version was published online in October 2005 with corrections to the Cover Date.     

The mitigation of the vibration effects caused by tunnel blasts in urban areas: a case study in Istanbul

Ground vibrations generated by commercial explosives in tunnel construction may cause structural damage in urban areas. Therefore, suppressing the vibration effects and mitigating the possible hazard after blasting is important. We present a new method of controlled blasting that is environmentally friendly, and easy to utilize for tunnel construction. Small charges in this method are detonated sequentially to produce minimum side effects. The efficiency of the charges may be increased based on the previously monitored shots. This method is utilized in a tunnel construction in Istanbul with five experimental shots. In these experiments, the duration and also the quantity of explosives were carefully controlled. We were able to obtain better results with short durations (480 ms) instead of long durations (9,000 ms) although the vibration levels defined as peak particle velocity (PPV) became bigger while the quantity of the explosive charge increased from 3.088 to 9.264 kg.