Метод трех направлений

Summary In [1] the author has put forward a three-direction method, a general way of adjustment of angular observations in incomplete sets by the method of extending into angular combinations, and the definition of mean weightP ^*. In this article the question is dealt with as a whole. In the three-direction methods>3 triangulation directions are measured in direction triplets 123, 234, 345,… …,s12, while in the method of measuring single angles at the station they are measured in angles 12, 23, 34, 45, …,s1. The advantage of transition from angles to direction triplets rests, besides in saving 31% of pointings, above all in certain possibility of elimination of the horizontal refraction, which follows from this. The treatise of the relation between the method of measurement and the refraction is not included into this article, as it would go beyond its scope. The fact that adjusted directions, with the exception of the stations having four directions, are not of equal weight, is proper not only to the three-direction method. The non-equality of weights is even more conspicuous in the method of measuring single angles at the station, and it appears already at the stations having four directions. In author's view the homogeneity of observation elements is more important than the homogeneity of weights from the point of view of adjustment at the station; therefore the direction triplets ought not to exist abreast with the angles in one programme, and especially the number of observations ought to be constant at one station with adjusted direction of homogeneous mean weight in the net. This transition from angles to direction triplets could also provoke a comment that simultaneous visibility of three adjoining directions occurs less often than of two such directions. The author adds to this that nowadays the causes of this phenomenon, following from unsuitable technique, must be eliminated. It is just air limpidity that ought to define the visibility, not unsufficient or everywhere equal intensity of light of reflectors, or too long sides of the triangulation net. Recent approach to this problem requires simultaneous visibility of all directions during most of the days of observation. In connection with the out-of=date technique, the methods of angular observation often have one unfavourable character: they are the cause of the accumulation of observations of “always visible” directions. The supposed merit of angles thus turns into their imperfection.

---

---

Адрес: Politickych vězňů 12, Praha 1-Nové Město     

Application of the Single-Bubble Airgun Technique for OBS-Data Acquisition Across the Jan Mayen Ridge,North Atlantic

A 140 km long wide-angle seismic profile has been acquired by use of 6 Ocean Bottom Seismographs across the Jan Mayen Ridge, North Atlantic. The profile was acquired twice; once with a traditionally tuned standard source and secondly with a somewhat smaller source tuned on the first bubble pulse. Analysis of the frequency content of the data reveals that the single-bubble source within the 10-15 Hz frequency range generates a signal with a level about 5 db above that of the standard source. These differences can partly be related to differences in airgun depth. The higher output level for these frequencies enables the single-bubble source to resolve intra-crustal structures with a higher degree of certainty, when compared to the data acquired by use of the standard source array. The standard source seems to generate slightly more energy for frequencies around 6 Hz, probably due to the use of a large 1200 in/sup3 gun in this array. These low frequencies a re of importance for mapping of lower crustal and upper mantle structures, and it is recommended that this is taken into account when seismic sources for mapping of deep crustal and upper mantle structures are designed.     

Sheet flow and suspension of sand in oscillatory boundary layers

after revisionTime-dependent measurements of flow velocities and sediment concentrations were conducted in a large oscillating water tunnel. The measurements were aimed at the flow and sediment dynamics in and above an oscillatory boundary layer in plane bed and sheet-flow conditions. Two asymmetric waves and one sinusoidal wave were imposed using quartz sand with D₅₀ = 0.21 mm. A new electro-resistance probe with a large resolving power was developed for the measurement of the large sediment concentrations in the sheet-flow layer. The measurements revealed a three layer transport system consisting of a pick-up/deposition layer, an upper sheet flow layer and a suspension layer.In the asymmetric wave cases the total net transport was directed “onshore” and was mainly concentrated in the thin sheet flow layer (< 0.5 cm) at the bed. A small net sediment flux was directed “offhore” in the upper suspension layer. The measured flow velocities, sediment concentrations and sedimenl fluxes showed a good qualitative agreement with the results of a (numerical) 1DV boundary-layer flow and transport model. Although the model did not describe all the observed processes in the sheet-flow and suspension layer, the computational results showed a reasonable agreement with measured net transport rates in a wide range of asymmetric wave conditions.     

Evidence of NW extension of the North Anatolian Fault Zone in the Marmara Sea: a new interpretation of the Marmara Sea (Izmit) earthquake on 17 August 1999

Active faults aligning in NW–SE direction and forming flower structures of strike-slip faults were observed in shallow seismic data from the shelf offshore of Avcılar in the northern Marmara Sea. By following the parallel drainage pattern and scarps, these faults were traced as NW–SE-directed lineaments in the morphology of the northern onshore sector of the Marmara Sea (eastern Thrace Peninsula). Right-lateral displacements in two watersheds of drainage and on the coast of the Marmara Sea and Black Sea are associated with these lineaments. This right-lateral displacement along the course of these faults suggests a new, active strike-slip fault zone located at the NW extension of the northern boundary fault of the ?ınarcık Basin in the Marmara Sea. This new fault zone is interpreted as the NW extension of the northern branch of the North Anatolian Fault Zone (NAFZ), extending from the ?ınarcık Basin of the Marmara Sea to the Black Sea coast of the Thrace Peninsula, and passing through B üy ük ?ekmece and K ü ? ük ?ekmece lagoons. These data suggest that the rupture of the 17 August 1999 earthquake in the NAFZ may have extended through Avcılar. Indeed, Avcılar and İzmit, both located on the Marmara Sea coast along the rupture route, were strongly struck by the earthquake whereas the settlements between Avcılar and İzmit were much less affected. Therefore, this interpretation can explain the extraordinary damage in Avcılar, based on the newly discovered rupture of the NAFZ in the Marmara Sea. However, this suggestion needs to be confirmed by further seismological studies.     

A new method for the generation of second-order random waves

In order to prevent the generation of spurious free sub- and superharmonics of random waves in a laboratory channel, the control signal for the wave board has to be derived according to a higher-order wave theory. An expression for this control signal has been derived with the perturbation method of multiple scales. It is much less complex and requires less computation time than the expressions obtained from the full second-order theory. The new method for second-order subharmonics was verified experimentally for waves with bichromatic and continuous first-order spectra. The data were analysed with the complex-harmonic principal-component analysis to reduce the influence of noise.     

Tropical Marine Fungi*

Abstract. Marine Ascomycetes, Basidiomycetes and Deuteromycetes were collected in tropical and subtropical regions (Australia, Belize, Fiji, Hawaii, Marshall Islands, Mexico, New Zealand, Palau, Thailand), and the known range of distribution for these fungi was extended. Exclusively tropical are 27 taxa, 9 are probably restricted to the tropics also, and 11 are cosmopolitan. Distribution maps are given for 5 taxa. New species (4), varieties (3), and combinations (2) of Ascomycetes are proposed, and keys to the taxa of Halosarpheia and Lulworthia are presented. Most of the species are decomposers of mangrove parts or of detritus in sandy beaches. Nine new host plants were found. Marine Ascomycetes were discovered for the first time living in shells of foraminifera.     

Mercury speciation in surface and deep waters of the Mediterranean Sea

Mercury speciation and its distribution in surface and deep waters of the Mediterranean Sea were studied during two oceanographic cruises on board the Italian research vessel URANIA in summer 2003 and spring 2004 as part of the Med Oceaneor and MERCYMS projects. The study included deep water profiles of dissolved gaseous Hg (DGM), reactive Hg (RHg), total Hg (THg), monomethyl Hg (MeHg) and dimethyl Hg (DMeHg) in open ocean waters. Average concentrations of measured Hg species were characterized by seasonal and spatial variations. Overall average THg concentrations ranged between 0.41 and 2.65 pM (1.32 ± 0.48 pM) and were comparable to those obtained in previous studies of the Mediterranean Sea. A significant fraction of Hg was present as “reactive” Hg (average 0.33 ± 0.32 pM). Dissolved gaseous Hg (DGM), which consists mainly of Hg⁰, represents a considerable proportion of THg (average 20%, 0.23 ± 0.11 pM). The portion of DGM typically increased towards the bottom, especially in areas with strong tectonic activity (Alboran Sea, Strait of Sicily, Tyrrhenian Sea), indicating its geotectonic origin. No dimethyl Hg was found in surface waters down to the depth of 40 m. Below this depth, its average concentration was 2.67 ± 2.9 fM. Dissolved fractions of total Hg and MeHg were measured in filtered water samples and were 0.68 ± 0.43 pM and 0.29 ± 0.17 pM for THg and MeHg respectively. The fraction of Hg as MeHg was in average 43%, which is relatively high compared to other ocean environments. The concentrations reported in this study are among the lowest found in marine environments and the quality of analytical methods are of key importance. Speciation of Hg in sea water is of crucial importance as THg concentrations alone do not give adequate data for understanding Hg sources and cycling in marine environments. For example, photoinduced transformations are important for the presence of reactive and elemental mercury in the surface layers, biologically mediated reactions are important for the production/degradation of MeHg and DGM in the photic zones of the water column, and the data for DGM in deep sea indicate the natural sources of Hg in geotectonicaly active areas of the Mediterranean Sea.     

Circulation and Brackish Water Dispersal in a Coastal Lagoon of Southwest Taiwan

Modest observations and numerical experiments were conducted to investigate circulation and brackish water dispersal in a coastal lagoon southwest of Taiwan. The Chi-Ku Lagoon, partially shielded from the sea by a string of sandbar barriers with two entrances among them, receives modest and episodic runoff from Chi-Ku Stream. Flood and ebb tidal streams entering and leaving the two entrances are found to converge and diverge in a flow stagnation area inside the lagoon. Under weak wind conditions, brackish water is preferentially retained in the flow stagnation area. Besides the observations, scenario runs using a three-dimensional numerical model also indicate strong modulation by monsoon winds. Both summer southwest monsoon and winter northeast monsoon reduce brackish water retention; the latter is found to be more effective. This revised version was published online in August 2006 with corrections to the Cover Date.