In situ tests for ice strength measurements

Ice effects have caused extensive damage. Enormous forces have been recorded. On the other hand, ice has been used as a structural material under various situations. To use ice beneficially and to assess the danger of ice forces, it is necessary to know the mechanical properties of ice.Results from the large number of ice tests carried out in laboratories show the difficulties of sampling and testing procedures. Most of the tests have not reproduced faithfully enough the conditions existing in nature. To obtain adequate results, laborious and slow samplings and preparations of test specimens have been necessary. Recently, extensive use has been made of in situ tests in order to reduce the number of factors whixh can induce errors in measurements. Large scale tests have simulated actual structures. General ice properties have become available from small-scale in situ tests. Since these tests give rapid results, a large number are already available with a good coverage of field conditions.A theoretical basis has been devised for these in situ tests which measure essentially the unconfined and confined compressive strengths of ice, and practical devices have been developed to execute these tests. A correlation of measurements from laboratory tests and in situ tests has established a link between natural and artificial environments. Brittle elastic and clastic theories have been applied, to find the best correlations for ice tests. Test results have been related to the mechanical properties as used in engineering practice.A very summary conclusion of results is that cold sea ice and cold fresh water ice are both very strong. However, depending on the load rate, ice can be quite brittle, which mitigates dangerous effects from ice action against massive structures.     

Long-range sonar views of submarine canyons

Submarine canyons on the northern margin of the Bay of Biscay have been viewed with side-scan sonar at slant ranges carying from 1 km to 22 km. First results indicate the importance of secondary gullying, and that while published charts may show the correct number of canyons the trends are sometimes more oblique to the regional slope than shown (probably fault-controlled). In general the similarity to subaerial fluvial drainage patterns is striking.     

Seasonal and spatial variation in abundance and egg production of Paracalanus parvus (Copepoda: Calanoida) in/out Jiaozhou Bay, China

The spatial distribution of stage-specific abundance and reproduction of the copepod Paracalanus parvus were studied from October 2005 to September 2006 in the Jiaozhou Bay. This copepod occurred continuously in this bay throughout the year. The species reached the lowest abundance in April and peaked in June. From October to December, distribution center mainly occurred in offshore water and at the mouth of the bay. In winter, early copepodites and adults gradually decreased and till February, most of the population was only comprised of CIV–CV stages. Overwintering copepodites matured in March and males tended to mature before female. From May to September, each stage occurred in the population and gradually reached high abundance. Temperature and chlorophyll a (Chl-a) concentration in the three stations can't clearly explain the seasonal variation in stage-specific abundance, so we surmised the important effect of the Yellow Sea. Egg production rate (EPR) reached its lowest in winter and peaked in June at 60.8 eggs female⁻¹ day⁻¹ in nearshore water. In the warming period, EPR in nearshore water was statistically higher and EPR > 10 eggs female⁻¹ day⁻¹ lasted longer than that in offshore water, showing the importance of nearshore water for recruitment of P. parvus. Our study showed that EPR was positively related to temperature and total chlorophyll a in offshore water and mouth of the bay. In nearshore water, the relationships between EPR and temperature and Chl-a in three size fractions were not the same as those in offshore water, suggesting complicated ecosystem in such a eutrophic area in warming period.     

Solubility of hydrous ferric oxide and iron speciation in seawater

Iron solubility equilibria were investigated in seawater at 36.22‰ salinity and 25°C using several filtration and dialysis techniques. In simple filtration experiments with 0.05 μm filters and Millipore ultra-filters, ferric chlorides fluorides, sulfates, and FeOH²⁺ species were found to be insignificant relative to Fe(OH)₂⁺ at p[H⁺] = ?log [H⁺] greater than 6.0. Hydrous ferric oxide freshly precipitated from seawater yielded a solubility product of ${}^1\text{K}{}_{\mathrm{<mtext>so</mtext>}}\text{=}\text{[Fe}{}^{\mathrm{3+}}\text{][H}{}^{\mathrm{+}}\text{]}{}^{\mathrm{?3}}\text{= 4.7 · 10}{}^5$. Solubility studies based on the rates of dialysis of various seawater solutions and on the filtration of acidified seawater solutions indicated the existence of the Fe(OH)₃⁰ species. The formation constant for this species can be calculated as ${}^1\text{β}{}_3\text{=}\text{[Fe(OH)}{}_3{}^0\text{] [H}{}^{\mathrm{+}}\text{]}{}^3\text{/[Fe}{}^{\mathrm{3+}}\text{] = 2.4 · 10}{}^{\mathrm{?14}}$. The Fe(OH)₄^? species is present at concentrations which are negligible compared to Fe(OH)₂⁺ and Fe(OH)₃⁰ in the normal pH range of seawater. However, there is at least one other significant ferric complex in seawater above p[H⁺] = 8.0 (possibly with bicarbonate, carbonate, or borate ions) in addition to the Fe(OH)₂⁺ and Fe(OH)₃⁰ species.     

Enhanced geochemical gradients in a marine shallow-water hydrothermal system: Unusual arsenic speciation in horizontal and vertical pore water profiles

The shallow marine hydrothermal vents near Ambitle Island in eastern Papua New Guinea discharge hot, slightly acidic, As-rich, chemically reduced fluid into cool, slightly alkaline, oxygenated seawater. Gradients in temperature, pH, and total As (As^T), among others, are established as the two aqueous phases mix. The hydrothermal fluid contained 900 μg/L As^T, almost exclusively present as the reduced As^III, while local seawater measured between 1.2 and 2.4 μg/L As, with approximately equal levels of As^III and As^V. Of particular interest in this study was As speciation and abundance in pore waters as a function of sediment depth and as a function of distance from the area of focused venting. With increasing distance, As^T concentration in the pore water decreased rapidly, but remained elevated up to 300 m from the area of focused venting when compared to a non-hydrothermal control site. As a function of depth (to 100 cm) As^T concentration in the pore water profiles was elevated and generally increased with depth. Surprisingly, aqueous As^V far exceeded aqueous As^III at almost all distances and depths investigated, while at the control site the As^III concentration exceeded that of As^V. In the Tutum Bay hydrothermal system, chemical disequilibria among As species provide potential metabolic energy for arsenite oxidizing microorganisms where hydrothermal fluid mixes with seawater near the vent orifice, and for arsenate reducing microorganisms with increasing distance and depth from the hydrothermal point source.     

Evolution of sedimentary basins from the standpoint of petroleum origin and accumulation—an approach for a quantitative basin study

Generation, migration and accumulation of petroleum in a sedimentary basin is a function of geologic, hydrodynamic and thermodynamic development of the basin and the type and amount of organic matter. Temperature history not only determines rate of hydrocarbon generation, but also affects paleohydrodynamics and physical and thermal properties vs depth relationships. Therefore, paleotemperature is the most important parameter. Paleohydrodynamics together with geologic history of the basin is important in shaping secondary migration patterns and accumulation of hydrocarbons.Quantification of all the above processes is complicated. Steps in constructing a deterministic dynamic model for calculation of petroleum potential during a sedimentary basin development are stated and analyzed in this paper. The effect of paleotemperature variations on petroleum generation and on physical properties of sedimentary sequences are illustrated by numerical examples. Computer models will enable exploration geologists to make quantitative exploration predictions in sedimentary basins.