Delineation of fluvial sediment architecture of subalpine riverine systems using noninvasive hydrogeophysical methods

River management and restoration measures are of increasing importance for integrated water resources management (IWRM) as well as for ecosystem services. However, often river management mainly considers engineering and construction aspects only and the hydrogeological settings as the properties and functions of ancient fluvial systems are neglected which often do not lead to the desired outcome. Knowledge of the distribution of sediment units could contribute to a more efficient restoration. In this study, we present two noninvasive approaches for delineation of fluvial sediment architecture that can form a basis for the restoration, particularly in areas where site disturbance is not permitted. We investigate the floodplain of a heavily modified low-mountain river in Switzerland using different hydrogeophysical methods. In the first approach, we use data from electromagnetic induction (EMI) with four different integral depths (0.75–6 m) and gamma-spectrometry as well as the elevation data as input for a K-means cluster algorithm. The generated cluster map of the surface combines the main characteristics from multilayered input data and delineates areas of varying soil properties. The resulting map provides an indication of areas with different sedimentary units. In the second approach, we develop a new iterative method for the generation of a geological structure model (GSM) by means of various EMI forward models. We vary the geological input parameters based on the measured data until the predicted EMI maps match the measured EMI values. Subsequently, we use the best matched input data for the GSM generation. The derived GSM provides a 3D delineation of possible ancient stream courses. A comparison with an independent ground penetrating radar (GPR) profile confirmed the delineations on the cluster map as well as the vertical changes of the GSM qualitatively. Thus, each of the approaches had the capacity for detecting sedimentary units with distinct hydraulic properties as an indication of former stream courses. The developed methodology presents a promising tool for the characterization of test sites with no additional subsurface information.     

Anthropogenic contamination of groundwater with nitrate in arid region: case study of southern Hodna (Algeria)

In southern Hodna, an arid region of Algeria, the extension of irrigated agriculture and overexploitation of groundwaters have led to a rupture with traditional land use by pastoralism. Due to the arid conditions, groundwaters are the only water resources for man and irrigation. This study focuses on nitrate contamination of groundwaters and its increase since the last 40 years, on the basis of two archives and recent analyses. The chemical facies of waters is sulphate-chloride, the risk of salinity is moderate to large. The sodicity risk, as estimated by the SAR, is low due to the large salinity and the sandy soil texture. Nitrate contamination of deep groundwater is a clear evidence when recent data are compared to the historical data. From 1996 to 2008, the proportion of samples with NO ₃ ^? concentrations larger than 50 mg/L increases from 24 to 61 %, the proportion of samples with NO ₃ ^? concentrations larger than 100 mg/L increases from 12 to 27 %. The study points at a general contamination of aquifers from anthropic origin: phreatic water was already contaminated when pastoralism was dominant (1967); as population increased and irrigation agriculture developed with large use of N-fertilizers and organic amendments, contamination extended spatially and vertically to deep aquifer. To remediate this contamination, fertilizers should be fractionated and limited to plant requirements on the basis of soil and plant analyses. Excess of irrigation should be avoided. Soil surface should be continuously covered to prevent nitrate leaching. Secondly, more efficient irrigation techniques, such as localized irrigation, should be implemented, with adaptation of crop systems and fertilizer inputs to arid conditions. Farmers should then be trained; simultaneously, local agronomic references that are presently lacking should be acquired.     

Landslide temporal analysis and susceptibility assessment as bases for landslide mitigation, Machu Picchu, Peru

Multi-temporal landslide occurrence information acquired through aerial photo interpretation and field mapping was used to assess occurrence frequencies on the slopes around the UNESCO cultural world heritage site of Machu Picchu, Peru. This showed that the coarse time resolution of the historical landslide information may lead to inaccurate interpretations regarding landslide occurrence frequencies in some parts of the study area. In addition, the assumption that the past landslide frequency can be used to describe the future landslide occurrence was not proved in the study area. Thereafter, unique conditional analyses were undertaken to assess landslide susceptibility using a limited number of preparatory factor maps. It showed that large majority of the Inca City is located on least susceptible areas within the region. The results of the susceptibility assessment combined with landslide occurrence frequencies may serve as a basis for the landslide hazard mitigation in the studied area. For these purposes, pixel-based susceptibility maps were generalized into expert-defined landslide management units. These units provide site managers with easily understandable and applicable hence reliable information about future landslide occurrences. An approach describing usage of the resulting susceptibility maps for onsite mitigation purposes was described with respect to the needs of Machu Picchu site managers.     

Thermal, mechanical and chemical influences on the performance of optical fibres for distributed temperature sensing in a hot geothermal well

Structural well-bore integrity is an important issue for sustainable provision of geothermal energy. Raman scattering based fibre optic distributed temperature sensing (DTS) can help to monitor the status of a well and therefore help to optimize expensive work-over activities. This study reports on the installation of a fibre-optic cable in the cemented annulus behind the anchor casing in the high temperature geothermal well HE-53, Hellisheiði geothermal field, SW Iceland. Although the cable has been damaged during the installation, temperature data could be acquired during the entire length of installation down to 261.3 m. Temperature measurements were performed during the installation in spring 2009, during the onset of a flow test in summer 2009 and after a 8.5 month shut-in period in summer 2010. During the flow test, maximum temperatures of 230 °C were measured after 2 weeks fluid production. Using optical time domain reflectometry (OTDR), attenuation measurements at 850 and 1,300 nm enabled to identify mechanical, thermal, and chemical degradation along the optical fibre. The observed degradation led to erroneous temperature readings and limits, due to the optical budget of the DTS system, the accessible length of the fibre. The characteristics and the influence of the different degradation mechanisms on the accuracy of the DTS measurements are discussed and recommendations for an optimized installation are given.     

The effect of health benefits on climate change mitigation policies

This paper studies the interplay between climate, health, and the economy in a stylized world with eleven heterogeneous regions, with special emphasis on USA, Europe, China, India, and Africa. We introduce health impacts into a simple economic integrated assessment model where both the local cooling effect of SO ₂ and the global warming effect of CO ₂ are endogenous, and investigate how these factors affect the equilibrium path. Regions do not respond in the same way to climate change. In particular, emission abatement rates and health costs depend on the economic and geographical characteristics of each region. Two policy scenarios are considered, Nash and Optimal, for which we present both global and regional results. Results for Africa and China are highlighted.     

The value of bioenergy in low stabilization scenarios: an assessment using REMIND-MAgPIE

This study investigates the use of bioenergy for achieving stringent climate stabilization targets and it analyzes the economic drivers behind the choice of bioenergy technologies. We apply the integrated assessment framework REMIND-MAgPIE to show that bioenergy, particularly if combined with carbon capture and storage (CCS) is a crucial mitigation option with high deployment levels and high technology value. If CCS is available, bioenergy is exclusively used with CCS. We find that the ability of bioenergy to provide negative emissions gives rise to a strong nexus between biomass prices and carbon prices. Ambitious climate policy could result in bioenergy prices of 70 $/GJ (or even 430 $/GJ if bioenergy potential is limited to 100 EJ/year), which indicates a strong demand for bioenergy. For low stabilization scenarios with BECCS availability, we find that the carbon value of biomass tends to exceed its pure energy value. Therefore, the driving factor behind investments into bioenergy conversion capacities for electricity and hydrogen production are the revenues generated from negative emissions, rather than from energy production. However, in REMIND modern bioenergy is predominantly used to produce low-carbon fuels, since the transport sector has significantly fewer low-carbon alternatives to biofuels than the power sector. Since negative emissions increase the amount of permissible emissions from fossil fuels, given a climate target, bioenergy acts as a complement to fossils rather than a substitute. This makes the short-term and long-term deployment of fossil fuels dependent on the long-term availability of BECCS.     

Grain size distribution of soils within the Cordillera Blanca,Peru: An indicator of basic mechanical properties for slope stability evaluation

This paper presents results of a study on the mechanical properties of sandy and gravely soils within the Cordillera Blanca, Peru. The soils were divided into groups according to their origin （glacial, fluvial, or debris flow）. The grain size distribution of forty three soil samples was used to classify the soils according to the scheme of the Unified Soil Classification System （USCS）. These distributions have then been used to estimate shear strength and hydraulic properties of the soils. There are clear differences between the soils which reflect their divergent origins. The glacial soils normally fit within one of two distinctive groups according to the proportion of fines （Group A, 7%-21.5%; Group B, 21%-65%）. The estimation of shear strength at constant volume friction angle and peak shear strength of the glacial sediments with low content of fines was made using published data relating to the measured shear strength characteristics of soils with similar origins and grain size distributions. The estimated values were supported by measurements of the angle of repose taken from fourteen samples from two moraines and by shear tests on samples from one locality. The results of the grain size distribution werealso used to estimate the average hydraulic conductivity using the empirical Hazen formula which results were verified by field infiltration tests at two localities.     

Monitoring precipitable water vapor in real-time using global navigation satellite systems

This paper addresses real-time monitoring of the precipitable water vapor (PWV) from GNSS measurements and presents some results obtained from 6-month long GNSS PWV experiments using international and domestic GNSS networks. In the real-time GNSS PWV monitoring system a server/client structure is employed to facilitate formation of PWV networks and single-differenced GNSS measurements are utilized to mitigate errors in GNSS satellites’ orbits and clocks. An issue relating to baseline length between the server and clients is discussed in detail and as a result the PWV monitor is configured to perform in two modes depending on the baseline length. The server estimates sequentially the zenith wet delay of the individual stations, which is then converted into the PWV of the stations. We evaluate system performance by comparing the real-time PWV solution with reference solutions including meteorological measurements obtained with radiosondes and deferred-time precision GNSS PWV solutions. Results showed that the standard deviation of difference between the real-time PWV and the reference solutions ranged from 2.1 to 3.4 mm in PWV for a 6-month long comparison, which was improved to 1.4 to 2.9 mm by reducing comparison period to 20 days in winter.     

King George Island GIS (KGIS) project of WGGGI —A state of the art

The presentation contains information on existing geodetic data for King George Island obtained from the questionnaires distributed among the members of the WGGGI.     

Seismic event near Jarocin (Poland)

The earthquake of magnitude M _L = 3:8 (EMSC) took place on Friday, 6 January 2012, north-east of the town of Jarocin in Wielkopolska Region, Poland. The only historical information about past earthquakes in the region was found in the diary from 1824; apart of it, there was a seismic event noticed in the vicinity of Wielkopolska in 1606 (Pagaczewski 1982). The scope of this paper is to describe the 6 January 2012 event in view of instrumental seismology, macroseismic data analysis and known tectonics of the region, which should be useful in future seismic hazard analysis of Poland.