Cyclic variations in the differential rotation of the solar corona

The rotation of the solar corona is analyzed using the original database on the brightness of the FeXIV 530.3 nm coronal green line covering six recent activity cycles. The rate of the differential rotation of the corona depends on the cycle phase. In decay phases, there are only small differences in the rotation, which are similar to that of a rigid body. The differences are more significant (though less pronounced than in the photosphere) during rise phases, just before maxima, and sometimes at maxima. The total rate of the coronal rotation is represented as a superposition of two, i.e., fast and slow modes. The synodic period of the fast mode is approximately 27 days at the equator and varies slightly with time. This mode displays weak differences in rotation and is most pronounced in the middle of decay phases. The slow mode is manifested only at high latitudes during the rise phases of activity, and displays a mean period of 31 days. The relative contribution of each mode to the total rotational rate is determined as a function of time and heliographic latitude. These results indicate that the structure of the velocity field in the convective zone must also vary with time. This conclusion can be verified by helioseismology measurements in the near future.     

Improved NMO correction with a specific application to shallow-seismic data

The application of traditional NMO‐correction techniques in the processing of seismic data may result in severe distortion. This distortion is observed as a decrease in frequency content (NMO stretch) or even a total loss of data for steep velocity gradients. It is shown that the specific nature of the observed distortion is introduced by the particular implementation of the traditional NMO‐correction technique. It is also shown that other techniques that have been proposed in the literature suffer from similar artefacts. An alternative approach is suggested, based on the correction of tapered blocks of seismic data, followed by a coherence filter to compensate for the specific artefacts thus introduced. Correction of seismic amplitudes (e.g. geometrical spreading and attenuation) is implemented as an integral part of the NMO‐correction method thus allowing for both dynamic and kinematic reconstruction of interfering events. From the application of this method to synthetic and field data, it is concluded that the proposed technique may be particularly useful in the processing of shallow seismic (shear‐wave) data. Although not illustrated in this paper, it is emphasized that application of the proposed method is by no means restricted to shear waves; application to P‐wave data will prove equally useful, although the stretch effects involved may not be as severe as in the examples given in this paper.     

Moment Tensor Inversion of Regional Phases: Application to a Mine Collapse

—?The aim of our study consists of analyzing potentially non-double-couple seismic events recorded at regional distances. In order to define the nature of the seismic source, a moment tensor inversion is carried out as this method is general enough not to initially constrain the source mechanism. In this paper we present an application to a seismic event induced by a mine collapse which occurred near the town of Halle in Germany. Because of its induced nature, many parameters such as the location and geometry of this seismic source are known. This information allows us to test the influence of inadequate propagation modeling on the moment tensor obtained from the inversion. Green's functions have been computed with the reflectivity method in a flat layered medium, using the European model EurID (Du et? al., 1998; Dufumier et al., 1997). From the inversion of P-wave seismograms recorded by the German Regional Seismic Network will, we obtained a source time function which can be decomposed into two subevents. The first one has a large isotropic part and a deviatoric mechanism with near vertical nodal planes. No volume change is observed for the second subevent, but a deviatoric component opposite of the first one. The addition of S-waves does not change the results of the inversion which are stable. Surface waves were not used because of their poor dispersion curves. Based on the moment tensor obtained from these inversions, the physical process at the source is compatible with a large cavity collapse.     

U–Pb zircon chronostratigraphy of early-Pliocene ignimbrites from La Pacana, north Chile: implications for the formation of stratified magma chambers

High spatial resolution U–Pb dates of zircons from two consanguineous ignimbrites of contrasting composition, the high-silica rhyolitic Toconao and the overlying dacitic Atana ignimbrites, erupted from La Pacana caldera, north Chile, are presented in this study. Zircons from Atana and Toconao pumice clasts yield apparent ²³⁸U/²⁰⁶Pb ages of 4.11±0.20 Ma and 4.65±0.13 Ma (2σ), respectively. These data combined with previously published geochemical and stratigraphic data, reveal that the two ignimbrites were erupted from a stratified magma chamber. The Atana zircon U–Pb ages closely agree with the eruption age of Atana previously determined by K–Ar dating (4.0±0.1 Ma) and do not support long (>1 Ma) residence times. Xenocrystic zircons were found only in the Toconao bulk ignimbrite, which were probably entrained during eruption and transport. Apparent ²³⁸U/²⁰⁶Pb zircon ages of 13 Ma in these xenocrysts provide the first evidence that the onset of felsic magmatism within the Altiplano–Puna ignimbrite province occurred approximately 3 Myr earlier than previously documented.     

Onshore and offshore seismic and lithostratigraphic analysis of a deeply incised Quaternary buried valley system in the Northern Netherlands

High-resolution seismic data (onshore and offshore), geophysical borehole data as well as detailed lithofacies from airlift boreholes were acquired in northern Netherlands on and around the island of Ameland. Marine and land seismic data combined with information from land boreholes have been explored with the objective of providing a sedimentary model. Qualitative seismic facies analysis of the valley fill commonly shows a thin unit with high amplitude reflectors at the base. Thick units of variable seismic facies (transparent to high amplitude) occur higher up in the sequence. Onlap is common at mid–upper levels within the sandy valley fill (with clay in mm layering), and a transparent seismic facies, corresponding to firm clays, is common at the top. Almost all lithological unit boundaries recognised within core parameters correspond with seismic unconformities within error margins. Subunits contain multiple cyclical trends in gamma ray and grain size. Cyclical trends show lower order fluctuations in gamma radiation on a scale of less than 1 m. Gamma-ray pattern variability between units, e.g. in general coarsening-up or fining-up units, suggests migration of subaqueous outwash fans or ice margin fluctuations. Seismic results could support a headward excavation and backfilling process suggested by Praeg [Morphology, stratigraphy and genesis of buried Elsterian tunnel valleys in the southern North Sea basin [PhD thesis]: University of Edinburgh, 207 pp.; Journal of Applied Geophysics, (this volume)] as being responsible for the formation of buried valleys. On a lithological scale, a more complicated, detailed and cyclical pattern arises. Catastrophic processes are considered unlikely as being responsible for the infill sequence because of the observed small-scale facies variability and because of the presence of diamicton layers. Diamicton layers at the base of basal unconformities as well as higher in sequence could suggest subglacial deformation by grounded ice before and during the valley-fill process.     

Evidence for fullerenes in solid bitumen from pillow lavas of Proterozoic age from Mítov (Bohemian Massif, Czech Republic)

Andesitic pillow lavas containing biogenic, solid bitumen (SB) are a constituent of a Neoproterozoic volcanosedimentary sequence (Teplá-Barrandian unit, Bohemian Massif) in the Mítov area of the Czech Republic. A black shale formation that is crosscut by these andesitic basalts is 565 Ma old. Carbon disulfide extracts of two powdered samples of SB contain 0.2 and 0.3 ppm of C₆₀, respectively, as determined by high-pressure liquid chromatography. The peak assignment based on retention time is fully supported by high-resolution electron ionization mass spectrometry (EI-MS). No C₇₀ was detected, nor was C₆₀ found in two other SB samples from this locality. Other investigated carbonaceous samples from Bohemia (coals and anthracites of Upper Paleozoic age and anthraxolite, graphitoids, and graphite of Upper Proterozoic age) did not contain fullerenes at concentrations above the detection limit of 0.01 ppm. The absence of C₆₀ in these samples was confirmed by EI-MS. The proposed mechanism of fullerene formation involves a primary algal phase, generation of a hydrocarbonaceous mixture in the course of thermal evolution of the sedimentary series, and their high-temperature transformation related to the extrusion of basalt. An important feature for fullerene conservation was the enclosure of fullerenes in SB with a structure similar to glasslike carbon, where the fullerene was protected against oxidation.     

Use of phytoplankton species indicators to track the origin of phytoplankton blooms in Willapa Bay, Washington

We focus on the question of whether high phytoplankton production events observed in a United States Pacific Northwest estuary consist of estuarine species blooms fueled by oceanic nutrient input or reflect offshore oceanic blooms that have advected into the estuary. Our approach is to use certain phytoplankton species as indicators associated with water mass origin, either estuarine or oceanic, to help resolve this question in Willapa Bay, Washington. We used species analysis and primary production data from 10 selected dates in May–September of 1998 and 1999, representing periods of high through low productivity. Out of 108 phytoplankton species identified from Willapa Bay, nine were selected and tested as indicators of oceanic species, six as estuarine, and two as surf zone. Our test results demonstrated the oceanic and estuarine species to be satifactory indicators of source waters. The prevalence of these species indicators in our samples revealed that the highest primary production and the appearance ofPseudo-nitzschia spp. were associated with oceanic intrusions of phytoplankton biomass into Willapa Bay. While the largest blooms were oceanic in origin, numerous medium-sized production events were from either oceanic, surf zone, or estuarine sources, indicating a complex situation.     

Preliminary seismic hazard maps of Slovenia

The preparation of the preliminary seismic hazard maps of the territory of Slovenia has been based on an expansion of the basic approach laid out by Cornell in 1968. Three seismic source models were prepared. Two of them are based mainly on the earthquake catalogue using the Poissonian probability model. A map of seismic energy release and a map of earthquake epicenter density are used to delineate seismic sources in these models. The geometry of the third model which is based on a rough estimate of seismotectonic setting is taken from the probabilistic seismic hazard analysis of a nuclear power plant in Slovenia. Published ground motion attenuation models based on strong motion records of recent strong earthquakes in Italy are used. Test maps for variable and uniform b-values are presented. The computer program, Seisrisk III, developed by the U.S. Geological Survey is used.     

Repeated Geodetic Measurements in the West Bohemia Seismoactive Region: Period 1993 - 1996

The western part of the Bohemian Massif is characterized by repeated occurrences of intraplate earthquake swarms. To study surface deformations of this anomalous region, a network covering about 2000 square kilometres for repeated geodetic measurements was established in 1993 - 1994. The positions of the individual points of the network were carefully picked with respect to local tectonic structure and earthquake foci distribution. GPS and precise levelling measurements were performed 1-2 times a year. The GPS data were processed by Bernese GPS software. No tendency to any displacement - either horizontal or vertical - of geological blocks was derived from the geodetic data for the period 1993 - 96. Only displacements of less than 5 mm/year in average could occur in the whole region in that period; larger displacements would have been revealed by our measurements.