Size-differential feeding in Pinna nobilis L. (Mollusca: Bivalvia): Exploitation of detritus,phytoplankton and zooplankton

The endangered fan shell Pinna nobilis is a large bivalve mollusc (<120 cm shell length) endemic to the Mediterranean that lives one-third buried in soft substrata, generally in shallow coastal waters. We hypothesised that P. nobilis of different sizes would ingest different food sources, because small fan shells will inhale material from closer to the substratum than do large fan shells. We studied stomach contents and faeces of 18 fan shells, 6 small (mean 23.0 cm length), 6 medium-sized (mean 41.5 cm length) and 6 large (mean 62.7 cm length) living in a small area of a low-energy coastal detritic bottom characterised by mud, sand and macroalgae at Mali Ston Bay, Croatia. We found that all P. nobilis ingested copious quantities of undetermined detritus (probably at least 95% of ingested material), phytoplankton, micro and mesozooplankton and pollen grains. Large P. nobilis stomach contents showed a preponderance of water column calanoid copepods, while small fan shells had higher numbers of bivalve larvae. All fan shells took in high numbers of harpacticoid copepods that are benthonic, feeding on microbial communities of detritus and benthic vegetation. There was also a significant selection of phytoplankton species, some apparently occurring between inhalation and ingestion. The stomach contents of small P. nobilis had a higher organic matter content than either medium-sized or large fan shells; this indicated that small fan shells ingested detritus of higher organic content than did larger P. nobilis. As the faeces of all P. nobilis had similar organic matter content, this also indicates higher assimilation efficiencies in small fan shells. The demonstration of differential dietary selectivity by different sized animals has implications for future trophic studies of this endangered species. This study also provides the first demonstration of predation on zooplankton by P. nobilis.     

西藏当雄错盐湖卤水冬季日晒蒸发实验研究

西藏当雄错盐湖位于藏北高原腹地西南侧,其水化学类型属典型的中度碳酸盐型,具有很好的工业开发前景和价值.自然蒸发是盐田日晒工艺的应用基础工作,本文基于室内卤水等温蒸发实验的相关结果,在当雄错湖区现场开展了盐湖卤水冬季日晒蒸发实验,通过考察碳酸盐型盐湖卤水在现场低温条件下自然蒸发过程中液相各元素的富集规律以及矿物的结晶析盐规律,分析了锂、硼、钾等元素的集散行为,并根据卤水蒸发过程中的元素富集、蒸失水量、盐类析出顺序、矿物组合以及物化性质的变化探索了盐类分离的控制条件.以Na+,K+/CO2-3,SO2-4,Cl--H2O五元体系(25℃)介稳相图为参考依据,绘制了当雄错盐湖卤水冬季日晒蒸发的结晶析盐路线.实验结果表明,当雄错盐湖卤水在冬季日晒蒸发过程中依次析出石盐、泡碱、天然碱、硼砂、钾石盐和扎布耶石,另有少量芒硝和泡碱等低温产物会提前析出或被母液夹带析出,利用冬季低温蒸发可制取富锂卤水,蒸发后期的母卤还可用于提取硼砂和钾石盐等矿物资源.实验结果为下一步开展盐田工程设计及制卤工艺操作提供了必要的基础数据,同时也为碳酸盐型盐湖卤水的综合利用和开发提供了理论支持.     

In situ Raman observation of the crystallization in NaNO3–Na2SO4–H2O solution droplets

Several double salts have been detected in building materials and most of these salts are incongruently soluble compounds. In contrast to single salts, however, no systematic investigations of the crystallization behavior and deleterious effects of incongruently soluble double salts exist. To assess the damage potential of these salts, a systematic investigation of their highly complex behavior is desirable. This paper deals with the crystallization behavior of various solids in the ternary mixed NaNO₃–Na₂SO₄ system including the formation of the double salt darapskite, Na₃NO₃SO₄·H₂O. The crystallization sequence during droplet evaporation experiments at room conditions was determined using Raman and polarization microscopy. The basic idea of this research is to use deviations of the crystallization sequence of a salt or a mixed salt solution from the equilibrium pathway as an indicator to detect the degree of supersaturation. The observed crystallization pathway includes the formation of the metastable phases Na₂SO₄(III), Na₂SO₄(V) and darapskite. The experimental observations are discussed on the basis of the NaNO₃–Na₂SO₄–H₂O phase diagram and the results provide evidence for crystal growth from highly supersaturated solutions in both systems. If the crystals growing under these conditions are confined, these supersaturations result in substantial crystallization pressures.     

Cation exchange capacity of loess and overlying soil in the non-carbonate loess sections, North-Western Croatia

The adsorption properties in terms of cation exchange capacity and their relation to the soil and sediment constituents (clay minerals, Fe-, Mn-, and Al-oxyhydroxides, organic matter) were investigated in loess, soil-loess transition zone, and soil at four loess-soil sections in North-Western Croatia. Cation exchange capacity of the bulk samples, the samples after oxalate extraction of Fe, Mn and Al, and after removal of organic matter, as well as of the separated clay fraction, was determined using copper ethylenediamine. Cation exchange capacity (pH～7) of the bulk samples ranges from 5 to 12 cmol _c /kg in soil, from 7 to 15 cmol _c /kg in the soil-loess transition zone, and from 12 to 20 cmol _c /kg in loess. Generally, CEC values increase with depth. Oxalate extraction of Fe, Mn, and Al, and removal of organic matter cause a CEC decrease of 3–38% and 8–55%, respectively, proving a considerable influence of these constituents to the bulk CEC values. In the separated clay fraction (<2 μm) CEC values are up to several times higher relative to those in the bulk samples. The measured CEC values of the bulk samples generally correspond to the clay mineral content identified. Also, a slight increase in muscovite/illite content with depth and the vermiculite occurrence in the loess horizon are concomitant with the CEC increase in deeper horizons, irrespective of the sample pretreatment.     

Height transformation models from ellipsoidal into the normal orthometric height system for the territory of the City of Zagreb

The paper presents the testing of the possibility of determining the heights of GPS points in the homogeneous field in the new Croatian Height Reference System (HVRS71) by using the method of height transformation. The testing was made in the area of Zagreb. As part of the field works, normal orthometric heights of 27 GPS points were determined according to the new height system, by transferring the benchmark heights using the geometric levelling method, thus obtaining GPS/levelling points of known ellipsoidal and normal orthometric heights. The GPS/levelling points served as the basis for determining the transformation models that enabled the computation of normal orthometric heights from ellipsoidal heights of any GPS point in the observed area. The empirical data used for modelling were reduced undulation dN values of GPS/levelling points. As part of the dN modelling with parametric functions, the approximation surfaces were obtained on the basis of three polynomials: FN310, FN312 and FN318. The transformation models were also tested using non-parametric Watson and Loess algorithms. The FN318 and Loess models yielded the best results.     

Deep water ventilation traced by <Emphasis Type="Italic">Synechococcus</Emphasis> cyanobacteria

The paper describes a finding of photoautotroph cyanobacteria Synechococcus in deep Adriatic waters during the spring of 2006. The maximum abundance in early May was positioned at 800 m, being of order of the values referred for the surface waters in the Adriatic Sea. The deep abundance maximum has been associated to the fast ventilation of deep Adriatic waters, usually occurring during wintertime strong cooling events. Two processes were detected: (1) deep convection in the South Adriatic Pit (SAP) and (2) density current going downslope. The first process was responsible for bringing the cyanobacteria down to 600-m depth in the area of convection, and the second one triggered the downslope transport of the cyanobacteria to the SAP very bottom. The depletion rate of Synechoccocus cyanobacteria in an extremely hostile environment has been computed to equal about 1 month.     

适用于更广渗透率范围含泥质砂岩的广义粘弹性BISQ模型

To simultaneously take into account the Biot-flow mechanism, the squirt-flow mechanism, and the frame-viscoelasticity mechanism, a generalized viscoelastic BISQ （Biot/squirt） model is developed for wave propagation in clay-bearing sandstones based on Dvorkin＇s elastic BISQ model. The present model is extended to a wide range of permeabilities （k 〉 0.05 mD） by introducing a dimensionless correction factor for viscoelastic parameters, defined as a function of the permeability and the clay content. We describe the frame＇s stress-strain relationship of the clay-bearing sandstones by the differential constitutive equations of generalized viscoelasticity and then derive the viscoelastic-wave dynamic equations. With the assumption of a plane-wave solution, we finally yield the phase velocities and the attenuation coefficients by solving the dynamic wave equations in the frequency and wave number domain. The comparison of numerical results and experimental data shows that the generalized viscoelastic BISQ model is applicable for modeling the wave propagation in most of the sandstones mainly bearing kaolinite clay.     

A parallel mesh-free contaminant transport model based on the Analytic Element and Streamline Methods

This paper introduces a new method for simulating large-scale subsurface contaminant transport that combines an Analytic Element Method (AEM) groundwater flow solution with a split-operator Streamline Method for modeling reactive transport. The key feature of the method is the manner in which the vertically integrated AEM flow solution is used to construct three-dimensional particle tracks that define the geometry of the Streamline Method. The inherently parallel nature of the algorithm supports the development of reactive transport models for spatial domains much larger than current grid-based methods. The applicability of the new approach is verified for cases with negligible transverse dispersion through comparisons to analytic solutions and existing numerical solutions, and parallel performance is demonstrated through a realistic test problem based on the regional-scale transport of agricultural contaminants from spatially distributed sources.     

Azimuthal anisotropy of the Pg-wave velocity in hypocentral volumes of NW Croatia

Based on a large set of arrival times of the Pg phase reported by local and regional stations, we estimate azimuthal anisotropy of the Pg-wave velocity in focal volumes of the upper crust in NW Croatia. The method is based on analyses of the azimuthal dependence of ratios of cumulative differences of arrival times and travel paths between foci of earthquake pairs, computed for rays propagating within narrow azimuthal windows. The results clearly indicate the presence of anisotropy of 3.3% with the direction of fast velocity (approximately NNE-SSW) coinciding with the direction of the maximum tectonic pressure as revealed by 23 available focal mechanisms and previous geological investigations. Although a large part of observed anisotropy can be explained assuming that focal volumes are pervaded by a system of vertical extensive-dilatancy anisotropy (EDA) cracks aligned under the influence of local tectonic stress field, there is indication that — to a smaller extent — some role was also played by alignment of structural features in the region.