An experimental study of magnesite dissolution rates at neutral to alkaline conditions and 150 and 200 °C as a function of pH, total dissolved carbonate concentration, and chemical affinity

Steady-state magnesite dissolution rates were measured in mixed-flow reactors at 150 and 200 °C and 4.6 < pH < 8.4, as a function of ionic strength (0.001 M ? I ? 1 M), total dissolved carbonate concentration (10⁻⁴ M < ΣCO₂ < 0.1 M), and distance from equilibrium. Rates were found to increase with increasing ionic strength, but decrease with increasing temperature from 150 to 200 °C, pH, and aqueous CO₃²⁻ activity. Measured rates were interpreted using the surface complexation model developed by Pokrovsky et al. (1999a) in conjunction with transition state theory (Eyring, 1935). Within this formalism, magnesite dissolution rates are found to be consistent with

     

Characteristics of Saturn’s FUV airglow from limb-viewing spectra obtained with Cassini-UVIS

This study reports the analysis of far ultraviolet (FUV) limb spectra of the airglow of Saturn in the 1150-1850 Å spectral window, obtained with the Ultraviolet Imaging Spectrograph (UVIS) onboard Cassini, spanning altitudes from −1200 to 4000 km. The FUV limb emission consists of three main contributions: (1) H Ly-α peaking at 1100 km with a brightness of 0.8 kilo-Rayleighs (kR), (2) reflected sunlight longward of 1550 Å which maximizes at −950 km with 16.5 kR and (3) H₂ bands in the 1150-1650 Å bandwidth, peaking at 1050 km reaching a maximum of 3.9 kR.A vertical profile of the local H₂ volume emission rate has been derived using the hydrocarbon density profiles from a model of the Saturn equatorial atmosphere. It is well matched by a Chapman function, characterized by a maximum value of 3.5 photons cm⁻³ s⁻¹ in the 800-1650 Å UV bandwidth, peaking at 1020 km.Comparisons between the observed spectra and a first-order synthetic airglow H₂ model in the 1150-1650 Å bandwidth show that the spectral shape of the H₂ bands is accounted for by solar fluorescence and photoelectron excitation. The best fits are obtained with a combination of H₂ fluorescence lines and 20 eV electron impact spectra, the latter contributing ∼68% of the total H₂ airglow emission.     

Toward an early warning system for dengue prevention: modeling climate impact on dengue transmission

Dengue fever is the most prevalent mosquito-borne viral disease of humans in tropical lands. As an efficient vaccine is not yet available, the only means to prevent epidemics is to control mosquito populations. These are influenced by human behavior and climatic conditions and thus, need constant effort and are very expansive. Examples of succeeded prevention are rare because of the continuous reintroduction of virus or vector from outside, or growing resistance of mosquito populations to insecticides. Climate variability and global warming are other factors which may favour epidemics of dengue. During a pilot study in Claris EC project, a model for the transmission of dengue was built, to serve as a tool for estimating the risk of epidemic transmission and eventually forecasting the risk under climatic change scenarios. An ultimate objective would be to use the model as an early warning system with meteorological forecasts as input, thus allowing better decision making and prevention.     

Which Models for Collocated Cokriging?

When a target variable is sparsely sampled, compared to a densely sampled auxiliary variable, cokriging requires simplifications. In its strict sense, collocated cokriging makes use of the auxiliary variable only at the current point where the target variable is to be estimated; in the multicollocated form, it also makes use of the auxiliary variable at all points where the target variable is available. This paper looks for the models that support these collocated cokrigings, i.e., the models in which the simplification resulting from the collocated forms does not result in any loss of information. In these models, the cross-structure between the two variables is shown to be proportional to the structure of the auxiliary variable, not to the structure of the target variable as is often assumed (except, of course, when all structures are proportional). The target variable depends on the auxiliary variable and on a spatially uncorrelated residual. Collocated cokriging simplifies to the simple method, which consists in kriging this residual. The strictly collocated cokriging corresponds to the particular case where the residual has a pure nugget structure, but it is then reduced to the single regression at the target point. Except for this trivial case, there are no models in which strictly collocated cokriging is exactly a cokriging.     

Comparison of hydrothermal alteration of carboniferous carbonate and siliclastic rocks in the Valles caldera with outcrops from the Socorro caldera, New Mexico

Continental Scientific Drilling Program (CSDP) drill hole VC-2B [total depth 1761.7 m (5780 ft); maximum temperature 295 °C] was continuously cored through the Sulphur Springs hydrothermal system in the western ring-fracture zone of the 1.14 Ma Valles caldera. Among other units, the hole penetrated 760.2 m (2494.1 ft) of Paleozoic carbonate and siliciclastic strata underlying caldera fill and precaldera volcanic and epiclastic rocks. Comparison of the VC-2B Paleozoic rocks with corresponding lithologies within and around the 32.1 Ma Socorro caldera, 192 km ( 119 miles) to the south-southwest, provides insight into the variability of alteration responses to similar caldera-related hydrothermal regimes.The Pennsylvanian Madera Limestone and Sandia Formation from VC-2B preserve many of the sedimentological and diagenetic features observed in these units on a regional basis and where unaffected by high temperatures or hydrothermal activity. Micrites in these formations in VC-2B are generally altered and mineralized only where fractured or brecciated, that is, where hydrothermal solutions could invade carbonate rocks which were otherwise essentially impermeable. Alteration intensity (and correspondingly inferred paleopermeability) is only slightly higher in carbonate packstones and grainstones, low to intermediate in siltstones and claystones, and high in poorly cemented sandstones. Hydrothermal fracture-filling phases in these rocks comprise sericite (and phengite), chlorite, allanite, apatite, an unidentified zeolite and sphene in various combinations, locally with sphalerite, galena, pyrite and chalcopyrite. Terrigenous feldspars and clays are commonly altered to chlorite and seriate, and euhedral anhydrite “porphyroblasts” with minor chlorite occur in Sandia Formation siltstone. Fossils are typically unaltered, but the walls of some colonial bryozoans in the Madera Limestone are altered to the assemblage chlorite-sericite-epidote-allanite. La, Ce and Nd are present in an unidentified hydrothermal mineral occurring throughout much of the VC-2B Pennsylvanian sequence.Carboniferous carbonate and siliciclastic formations within and around the Socorro caldera show a similar style of alteration and mineralization to their Valles caldera counterparts, but by contrast locally host commercial, caldera-related, base-metal sulfide deposits. As in the Valles rocks, mineralization and alteration in those of the Socorro caldera were strongly controlled by porosity. Unless disrupted by fractures, breccias, or karst cavities ( not identified in Valles caldera drill holes), the rocks remained relatively unaltered. Where these features allowed ingress of mineralizing hydrothermal solutions, base-metal sulfides and rare-earth-element-bearing minerals were precipitated.     

Structure et mise en place des massifs phonolitiques du Cantal (Auvergne,France)

Résumé Après un inventaire des différents critères de structure qu'offrent les dÔmes phonolitiques, et une présentation de leur méthode d'étude, le problème du choix des critères les plus efficaces est discuté.Les relations entre fluidalité, croissance et orientation des minéraux, débit en lauzes et prismation sont présentées en fonction du processus de mise en place de ces extrusions visqueuses endogènes.L'étude de l'orientation des lauzes se montre la plus efficace pour connaÎtre les conditions d'extrusion des dÔmes phonolitiques.Un certain nombre de massifs phonolitiques du Cantal sont donnés en exemple, et une brève synthèse sur les différentes formes structurales présentes est tentée.

---

The structure of phonolitic domes was studied using various criteria: orientation of phenocrysts, size and shape of crystals, texture of the groundmass determined by X-ray diffraction, flow-structure and jointing. The most efficient criteria are discussed.The relationship between flow-structure, growth and orientation of the minerals, sheeting and jointing are studied with respect to the emplacement process of the volcanological evolution of these viscous extrusions.The orientation of the lauzes (sheets) proves most indicative of conditions of extrusion of the phonolitic domes, whereas the jointing only indicates their cooling history.Some phonolitic domes of Cantal are shown, and a short synthesis of various structural types is made.

---

Zusammenfassung Die Struktur von Phonolith-Domen wurde anhand verschiedener Kriterien untersucht: Orientierung der Phenocrysten, Grö\e und Form der Kristalle, durch Röntgendiffraktion bestimmte Textur der Grundmasse, Flie\struktur und Klüftung.Die Beziehungen zwischen Flie\struktur, Wachstum und Orientierung der Minerale, bankiger Absonderung und Klüftung werden untersucht unter Berücksichtigung der vulkanischen Geschichte dieser viskosen Extrusionen, wobei sich die Untersuchung der Bankungsrichtung am aufschlu\reichsten für die Kenntnis der Extrusionsgeschichte der Phonolith-Dome erweist.Eine Reihe von Phonolith-Massiven des Cantal werden als Beispiel angeführt, und eine kurze Synthese der verschiedenen Strukturformen wird dargestellt.

---

Cantal, : , , , . , , , ; , . Cantal .

     

Three-dimensional model of tides and storm surges in a shallow well-mixed continental sea

A three-dimensional “long waves” model is discussed for the study of tides and storm surges in a shallow well-mixed continental sea. Emphasis is placed on the North Sea where tidal and storm currents constitute the essential part of the circulation and estimates from observations in the North Sea and, more especially, the Southern Bight are used to assess the relative importance of different effects and derive a simple set of equations by which vertical profiles of tidal and storm currents can be predicted, at each points, as functions of time.