Simultaneous determination of sulfide, polysulfides and thiosulfate as an aid to ore exploration

The interaction of water and sulfide minerals yields dissolved species which can be utilized to trace back the presence of sulfide minerals and associated minerals. Computer modeling and laboratory and field results show that the most characteristic dissolved species are hydrogen sulfide (H₂S, HS⁻), polysulfide ions (S_n²⁻) and thiosulfate (S₂O₃²⁻), derived from the hydrolysis of sulfide minerals. Typical concentration ranges are: 10⁻⁵ – 10⁻⁷ mole/l for hydrogen sulfide, 10⁻⁶ – 10⁻⁹ mole/l for polysulfides and 10⁻⁵ – 10⁻⁸ mole/l for thiosulfate. The chemical reactivity of these species at contact with air makes them difficult to assess unless determined immediately after sampling.These sulfur species can be determined rapidly and accurately in field conditions by simultaneous titration with mercuric chloride employing an Ag/Ag₂S electrode for the determination of the end points.The application to ore exploration is exemplified by the results of the research on roll-type uranium deposits in the southwest of France.     

On the maintenance of the axisymmetric part of the flow in the atmosphere

Summary The maintenance of the axisymmetric component of the flow in the atmosphere is investigated by means of a steady-state, quasi-geostrophic formulation of the meteorological equations. It is shown that the meridional variations in the time-averaged axisymmetric variables can be expressed as the sum of three contributions, one being due to the eddy heat transport, another to the eddy momentum transport, and a third to the convective-radiative equilibrium temperature which enters the problem through the specification of a Newtonian form of diabatic heating. The contributions by the large scale eddies are evaluated through the use of observed values for the eddy heat and momentum transports.The contributions from each of the three forcing mechanisms to the temperature and zonal wind fields are invstigated individually and found to be of about equal importance. The sum of the three contributions are also presented for the temperature, the zonal wind, the stream function associated with the mean meridional circulation and the corresponding vertical motion. Although the results fail to reproduce the main observed features of the lower stratosphere, they are found to be in good agreement with observations in the middle latitude troposphere. At any pressure level, for example, the computed mean zonal wind has a jet-like profile and the axis of the jet is found to slope to the south with height, as observed in the atmosphere.Based in part on a thesis submitted by the first author as partial fulfillment of the requirements for the Ph.D. degree at the University of Michigan. — Publication No. 194 from the Department of Meteorology and Oceanography, The University of Michigan.     

From subduction to transform motion: a seabeam survey of the Hellenic trench system

Preliminary results of a multi-narrow beam survey of the Hellenic trench system, in the Eastern Mediterranean, are presented. The southwestern Ionian branch is divided in small basins, partly filled with Pleistocene sediments. The morphology suggests that the basins are deformed by a compressional stress acting roughly perpendicularly to the trench along N50°E. This direction is the direction of the regional slip vector of the shallow thrust-type earthquakes. The structure of the southeastern Pliny-Strabo branch is quite different. Narrow en-e´chelon slots, oriented N40°E, have been mapped within the main troughs oriented N60°E. The regional earthquake slip vector is also oriented along N40°E. We conclude that the Hellenic trench system is an active subduction system, dominated by thrust along the Ionian branch and by transform motion along the Pliny-Strabo branch.     

Fracturation tertiaire et évolution des contraintes en Bavière orientale: le Jura franconien et la forêt bavaroise (R.F.A.)

Résumé L'analyse géométrique et cinématique de la fracturation dans le Jura franconien et la bordure occidentale du Massif bohémien met en évidence les mécanismes de la tectonique cassante d'âge teriaire, essentiellement ceux des grands accidents SE-NW (lignes de Pfahl et de Franconie) qui ont présenté successivement des jeux en coulissement dextre, en faille normale et en faille inverse. Cinq états de contrainte ont été caractérisés et comparés à ceux définis antérieurement dans le Jura souabe, en liaison avec la cinématique des plaques Europe et Afrique: compression N-S, distension E-W, compression NE-SW puis E-W, distension N-S.

---

The analysis of both the geometric and the kinematic cenozoic faulting in the Franconian Jura and in western Bohemia enables to characterize the mechanisms of cenozoic tectonics. More especially dextral strike-slip, normal fault and reverse fault have successively occurred along large SE-NW fault line, as the Pfahl and the Franconian fault systems. Five main stress patterns have thus been identified and then compared with those previously described in Swabian Jura. They are related to the kinematic of Europe and Africa plates, i. e.: (1) N-S compression, (2) E-W distension, (3) SW-NE compression, (4) E-W compression, (5) N-S distension.

---

Zusammenfassung Durch die geometrische und kinematische Analyse der Brüche wird die tertiäre Bruchtektonik (tectonique cassante) im Fränkischen Jura und am westlichen Rand des Böhmischen Massifs belegt. Es handelt sich im wesentlichen um die großen SE-NW orientierten Störungen der Linie von Pfahl und der Fränkischen Linie, die nacheinander als dextrale Blattverschiebungen, als Normalverwerfungen und als inverse Verwerfungen wirkten. Fünf Spannungszustände können charakterisiert und mit jenen, die bereits im Schwäbischen Jura definiert wurden, verglichen werden. Sie spiegeln die verschiedenen Stadien der kinematischen Entwicklung der europäischen und afrikanischen Platte wider: Kompression N-S, Zerrung E-W, Kompression NE-SW, sodann E-W, Zerrung N-S.

---

(tectonique cassante) . , , SE-NW , , , . 5 . : - , - , - , - - .

     

Building damage characteristics based on surveyed data and fragility curves of the 2011 Great East Japan tsunami

A large amount of buildings was damaged or destroyed by the 2011 Great East Japan tsunami. Numerous field surveys were conducted in order to collect the tsunami inundation extents and building damage data in the affected areas. Therefore, this event provides us with one of the most complete data set among tsunami events in history. In this study, fragility functions are derived using data provided by the Ministry of Land, Infrastructure and Transportation of Japan, with more than 250,000 structures surveyed. The set of data has details on damage level, structural material, number of stories per building and location (town). This information is crucial to the understanding of the causes of building damage, as differences in structural characteristics and building location can be taken into account in the damage probability analysis. Using least squares regression, different sets of fragility curves are derived to demonstrate the influence of structural material, number of stories and coastal topography on building damage levels. The results show a better resistant performance of reinforced concrete and steel buildings over wood or masonry buildings. Also, buildings taller than two stories were confirmed to be much stronger than the buildings of one or two stories. The damage characteristic due to the coastal topography based on limited number of data in town locations is also shortly discussed here. At the same tsunami inundation depth, buildings along the Sanriku ria coast were much greater damaged than buildings from the plain coast in Sendai. The difference in damage states can be explained by the faster flow velocities in the ria coast at the same inundation depth. These findings are key to support better future building damage assessments, land use management and disaster planning.     

Use of discriminant statistical analysis to determine the origin of an industrial pollution type in the aquiferous system of the area of Berrahal, Algeria

The continuous increase of industrial activities in the area of Berrahal (northeast of Algeria) resulted in an increase of waste disposal, inducing environmental pollution and contamination of groundwater. Available data on groundwater contamination were used to develop a statistical study for contaminated regions and to identify exposure scenarios of pollution. Chemical analysis of the samples shows that water of most wells and drillings is in bad quality or not drinkable, whereas statistical processing of these data by principal component analysis and discriminant factorial analysis suggests that wastewater coming from companies of the industrial park of Berrahal is very rich in organic pollutants (high percentages of BOD₅ and NO₂ ^?) and has high mineralization (has strong concentration in major elements and high electric conductivity); these constitute the main factors of the deterioration of the quality of this water. The considered exposure pathways were drinking water exploited from wells and drillings implanted in this area and its contact with soil (ingestion and dermal contact) that could threaten either humans or wildlife, on site or off site. In addition, groundwater was considered to be a potential risk pathway, especially for the ecosystem of Lake Fetzara and for the aquiferous system.     

Electrochemistry of reduced sulfur species in natural waters—I. The H2S-H2O system

Careful measurements of rest potentials of platinum electrodes (Eh) in the H₂S-H₂O system were made together with measurements of the pH and the potentials of Ag-Ag₂S electrodes (E_s^2?). The potentials of the platinum electrode are characteristic of H₂S chemisorption followed by H₂S discharge on the platinum. The relations between Eh, E_s^2? and pH are characteristic of the H₂S-H₂O system and of the hydrogen sulfide concentration. Thus these parameters can be employed to distinguish H₂S-H₂O systems from H₂S-S₈-H₂O systems. Field measurements on hot sulfurous springs are in agreement with laboratory data.     

On Some Simplifications of Cokriging Neighborhood

Choosing the cokriging neighborhood is often difficult. A poor choice, ignoring influent data, can result in a loss of information as well as in artifacts in simulations based on cokriging. Then it is convenient to use if possible, or to refer to models that lead to simplified cokriging neighborhood. We essentially consider the case of two stationary variables, a target variable and an auxiliary one. By examining possible simplifications, we set up a list of models (essentially models with residuals) that, in general or under specific configurations, lead to simplifications of cokriging neighborhood. Collocated, dislocated, and other types of neighborhood are identified, that are optimal in some models and configurations. Possible extensions to cokriging with unknown means, and to more variables, are included.     

Garnet zoning and orthopyroxene + plagioclase coronitisation

A very uncommon garnet-zoning—Ca poor centre and Ca rich margin—has been observed, in a granulite facies rock. Calculation of equilibrium at each stage of the garnet growth led to apply in this particular case, as well as for the most garnet-zoning instances, the Rayleigh fractionation model, the fractionation factor Ca being less than 1 at the beginning of the crystallization. Subsequent coronitisation, at lower P and/or higher T, involved the development of orthopyroxene and plagioclase in equilibrium with a thin (15 thick) Ca-Mg poor and Fe rich outer cuticle of the garnet: thus the garnet lattice appears to be not so refractory as previously admitted, and in most coronitisation processes involving garnet such an outer cuticle must be considered as a component of the new mineral assemblage.