Integrated land-use systems: Assessment of promising agroforest and alternative land-use practices to enhance carbon conservation and sequestration

Degraded or sub-standard soils and marginal lands occupy a significant proportion of boreal, temperate and tropical biomes. Management of these lands with a wide range of existing, site-specific, integrated, agroforest systems represents a significant global opportunity to reduce the accumulation of greenhouse gases in the atmosphere. Establishment of extensive agricultural, agroforest, and alternative land-use systems on marginal or degraded lands could sequester 0.82–2.2 Pg carbon (C) per year, globally, over a 50-year time-frame. Moreover, slowing soil degradation by alternative grassland management and by impeding desertification could conserve up to 0.5–1.5 Pg C annually. A global analysis of biologic and economic data from 94 nations representing diverse climatic and edaphic conditions reveals a range of integrated land-use systems which could be used to establish and manage vegetation on marginal or degraded lands. Promising land-use systems and practices identified to conserve and temporarily store C include agroforestry systems, fuelwood and fiber plantations, bioreserves, intercropping systems, and shelterbelts/windbreaks. For example, successful establishment of low-intensity agroforestry systems can store up to 70 Mg C/ha in boreal, temperate and tropical ecoregions. The mean initial cost of soil rehabilitation and revegetation ranges from $500–3,000/ha for the 94 nations surveyed. Natural regeneration of woody vegetation or agro-afforestation establishment costs were less than $1000/ha in temperate and tropical regions. The costs of C sequestration in soil and vegetation systems range from $1-69/Mg C, which compares favorably with other options to reduce greenhouse gas emissions to the atmosphere. Although agroforestry system projects were recently established to conserve and sequester C in Guatemala and Malaysia, constraints to wide-spread implementation include social conditions (demographic factors, land tenure issues, market conditions, lack of infrastructure), economic obstacles (difficulty of demonstrating benefits of alternative systems, capital requirements, lack of financial incentives) and, ecologic considerations (limited knowledge of impacts and sustainability of some systems).The information in this document has been funded by the U.S. Environmental Protection Agency. It has been subject to the Agency's peer and administrative review, and it has been approved for publication as an EPA document. Mention of trade names or commercial products does not constitute endorsement for use.     

Morphologic and stratigraphic evolution of muddy ebb-tidal deltas along a subsiding coast: Barataria Bay, Mississippi River delta

The Barataria barrier coast formed between two major distributaries of the Mississippi River delta: the Plaquemines deltaic headland to the east and the Lafourche deltaic headland to the west. Rapid relative sea‐level rise (1·03 cm year^?1) and other erosional processes within Barataria Bay have led to substantial increases in the area of open water (> 775 km² since 1956) and the attendant bay tidal prism. Historically, the increase in tidal discharge at inlets has produced larger channel cross‐sections and prograding ebb‐tidal deltas. For example, the ebb delta at Barataria Pass has built seaward > 2·2 km since the 1880s. Shoreline erosion and an increasing bay tidal prism also facilitated the formation of new inlets. Four major lithofacies characterize the Barataria coast ebb‐tidal deltas and associated sedimentary environments. These include a proximal delta facies composed of massive to laminated, fine grey‐brown to pale yellow sand and a distal delta facies consisting of thinly laminated, grey to pale yellow sand and silty sand with mud layers. The higher energy proximal delta deposits contain a greater percentage of sand (75–100%) compared with the distal delta sediments (60–80%). Associated sedimentary units include a nearshore facies consisting of horizontally laminated, fine to very fine grey sand with mud layers and an offshore facies that is composed of grey to dark grey, laminated sandy silt to silty clay. All facies coarsen upwards except the offshore facies, which fines upwards. An evolutionary model is presented for the stratigraphic development of the ebb‐tidal deltas in a regime of increasing tidal energy resulting from coastal land loss and tidal prism growth. Ebb‐tidal delta facies prograde over nearshore sediments, which interfinger with offshore facies. The seaward decrease in tidal current velocity of the ebb discharge produces a gradational contact between proximal and distal tidal delta facies. As the tidal discharge increases and the inlet grows in dimensions, the proximal and distal tidal delta facies prograde seawards. Owing to the relatively low gradient of the inner continental shelf, the ebb‐tidal delta lithosome is presently no more than 5 m thick and is generally only 2–3 m in thickness. The ebb delta sediment is sourced from deepening of the inlet and the associated channels and from the longshore sediment transport system. The final stage in the model envisages erosion and segmentation of the barrier chain, leading to a decrease in tidal discharge through the former major inlets. This process ultimately results in fine‐grained sedimentation seaward of the inlets and the encasement of the ebb‐tidal delta lithosome in mud. The ebb‐tidal deltas along the Barataria coast are distinguished from most other ebb deltas along sand‐rich coasts by their muddy content and lack of large‐scale stratification produced by channel cut‐and‐fills and bar migration.     

Windscale radiocaesium in the Clyde sea area

Radiocaesium, introduced into coastal waters in the effluent from the B.N.F.L. nuclear fuel reprocessing plant at Windscale, is present at significant levels throughout the Clyde Sea Area. Concentrations reached maximum in April, 1977, and have recently declined. Around 30% of Windscale radiocaesium output passes through the Clyde Sea Area but less than 0.3% remains in sediments. There appears to be no major radiological safety hazard. The radiocaesium is, however, an excellent tracer species for both waters and sediments. The Irish Sea-derived component comprises over 90% of Clyde seawater and may well introduce major inventories of pollutants. The average water residence time in the Clyde system is 4.5 months, although significantly longer entrainment is evident in northern sea lochs. Study of radiocaesium variations has enabled improved assessment of the Clyde's response to marine pollution.     

The temperature dependent,infrared absorption cross-sections for the chlorofluorocarbons: CFC-11, CFC-12, CFC-13, CFC-14, CFC-22, CFC-113, CFC-114, and CFC-115

The infrared absorption cross-sections for eight commonly used halogenated methanes and ethanes have been measured as a function of temperature from 203 to 293 K. High resolution spectra (0.03 cm^-1) have been used to derive integrated band strengths and peak cross-sections associated with the spectral features in the infrared region from 600 to 1500 cm^-2. The values obtained in this study are compared to those from previous reports, and recommendations are made for uses in atmospheric sensing and radiative energy transfer models. The observed temperature dependence in the spectral features is also discussed.     

Ephemeral landform development following rapid coastal uplift in the southern orogen of Taiwan

Newly emerged landscapes above sea level are characterized by rapidly evolving geomorphic systems where the initial fluvial pattern adapts to a former submarine topography. Such an early formed fluvial system establishes drainage basins and unstable landforms that characterize high topographic asymmetry which are prone to fast removal or reorganization. Transitional landscapes might form depositional systems as lakes or ponds that subsequently are incised, captured and incorporated into drainage basins. In this study we focus on the recently emerged Hengchun Peninsula to survey its paleoenvironment evolution. Three drillings performed in the Gangkou basin with fieldwork revealed several indicators that reconstructed stages of the landscape reorganization. The major finding shows an ephemeral large lake in the central part of the Hengchun Peninsula that was drained to the Pacific c. 6000 bp . The lake belonged to an ephemeral lakeland that was created after the emergence of the peninsula. Currently, several areas as relict landforms indicate this stage of topography evolution that through high rates of incision and subsequent captures, transforms into drainage basins. Furthermore, two drillings show brackish waters at the present estuary of the Gangkou basin. These two different paleoenvironments today build one system – Gangkou catchment. Long-term uplift rates show that a hanging wall of the Hengchun Fault plays a significant role in the creation of a lakeland by tilting the peninsula's surface. The tilt impacts on asymmetrical emergence of the peninsula and catchment development. Our study shows that a new geomorphic system might create depositional ephemeral landforms (lakes) that represent phases of early topography evolution after emergence above a sea level that are subjected to instantaneous rearrangement and evolves through large-scale phases before it reaches a topographic steady-state.     

Using model error in response history analysis to evaluate component calibration methods

This research is part of a larger effort to better understand and quantify the epistemic model uncertainty in dynamic response-history simulations. This paper focuses on how calibration methods influence model uncertainty. Structural models in earthquake engineering are typically built up from independently calibrated component models. During component calibration, engineers often use experimental component response under quasi-static loading to find parameters that minimize the error in structural response under dynamic loading. Since the calibration and the simulation environments are different, if a calibration method wants to provide optimal parameters for simulation, it has to focus on features of the component response that are important from the perspective of global structural behavior. Relevance describes how efficiently a calibration method can focus on such important features. A framework of virtual experiments and a methodology is proposed to evaluate the influence of calibration relevance on model error in simulations. The evaluation is demonstrated through a case study with buckling-restrained braced frames (BRBF). Two calibration methods are compared in the case study. The first, highly relevant calibration method is based on stiffness and hardening characteristics of braces; the second, less relevant calibration method is based on the axial force response of braces. The highly relevant calibration method consistently identified the preferable parameter sets. In contrast, the less relevant calibration method showed poor to mediocre performance. The framework and methodology presented here are not limited to BRBF. They have the potential to facilitate and systematize the improvement of component-model calibration methods for any structural system.     

Book reviews

Under thhe drought conditions that have occurred in Bulgaria during the last decade, agricultural use of non-conventional water may be an important resource. This is a specific case of simultaneous purification and utilisation by soil ecological systems. However, using non-conventional quality water presents a number of ecological and health risks and poses problems connected with soil and surface and ground water contaminated and with producing crops of acceptable quality. Bulgaria's municipal, industrial, and rural wastewater reclamation and reuse, in addition to other non conventional water resources as sea water, drainage water and mineralised groundwater, may be a reliable source even in drought years and thus is capable of replacing potable used in agriculture. This paper reviews the work of the authors and their colleagues in assessing the irrigation potentials of waste water in Bulgaria.     

Case studies of seasonal rainfall forecasts for Hong Kong and its vicinity using a regional climate model

Seasonal climate forecasts are one of the most promising tools for providing early warnings for natural hazards such as floods and droughts. Using two case studies, this paper documents the skill of a regional climate model in the seasonal forecasting of below normal rainfall in southern China during the rainy seasons of July–August–September 2003 and April–May–June 2004. The regional model is based on the Regional Spectral Model of the National Centers for Environmental Prediction of the United States. It is the first time that the model has been applied to a region dominated by the East Asian Monsoon. The article shows that the regional climate model, when being forced by reasonably good forecasts from a global model, can generate useful seasonal rainfall forecasts for the region, where it is dominated by the East Asia monsoon. The spatial details of the dry conditions obtained from the regional climate model forecast are also found to be comparable with the observed distribution.