Groundwater and surface water connectivity within the recharge area of Guarani aquifer system during El Niño 2014–2016

Recharge areas of the Guarani Aquifer System (GAS) are particularly sensitive and vulnerable to climate variability; therefore, the understanding of infiltration mechanisms for aquifer recharge and surface run‐off generation represent a relevant issue for water resources management in the southeastern portion of the Brazilian territory, particularly in the Jacaré‐Pepira River watershed. The main purpose of this study is to understand the interactions between precipitation, surface water, and groundwater using stable isotopes during the strong 2014–2016 El Niño Southern Oscillation event. The large variation in the isotopic composition of precipitation (from ?9.26‰ to +0.02‰ for δ¹⁸O and from ?63.3‰ to +17.6‰ for δ²H), mainly associated with regional climatic features, was not reflected in the isotopic composition of surface water (from ?7.84‰ to ?5.83‰ for δ¹⁸O and from ?49.7‰ to +33.6‰ for δ²H), mainly due to the monthly sampling frequency, and groundwater (from ?7.04‰ to ?7.76‰ for δ¹⁸O and from ?49.5‰ to ?44.7‰ for δ²H), which exhibited less variation throughout the year. However, variations in deuterium excess (d‐excess) in groundwater and surface water suggest the occurrence of strong secondary evaporation during the infiltration process, corresponding with groundwater level recovery. Similar isotopic composition in groundwater and surface water, as well as the same temporal variations in d‐excess and line‐conditioned excess denote the strong connectivity between these two reservoirs during baseflow recession periods. Isotopic mass balance modelling and hydrograph separation estimate that the groundwater contribution varied between 70% and 80%, however, during peak flows, the isotopic mass balance tends to overestimate the groundwater contribution when compared with the other hydrograph separation methods. Our findings indicate that the application of isotopic mass balance methods for ungauged rivers draining large groundwater reservoirs, such as the GAS outcrop, could provide a powerful tool for hydrological studies in the future, helping in the identification of flow contributions to river discharge draining these areas.     

The impact of coastal urbanization on the structure of phytobenthic communities in southern Brazil

The anthropogenic pressures on coastal areas represent important factors affecting local, regional, and even global patterns of distribution and abundance of benthic organisms. This report undertakes a comparative analysis of the community structure of rocky shore intertidal phytobenthos in both pristine like environments (PLE) and urbanized environments (UBE) in southern Brazil, characterizing variations on different spatial scales. Multivariate analysis of variance indicated that the PLE is characterized by a larger number of taxa and an increased occurrence of Rhodophyta species in relation to UBE. In contrast, UBE were dominated by opportunistic algae, such as Cladophora and Ulva spp. Significance tests further indicated higher species richness and Shannon-Wiener diversity on the PLE in relation to UBE. Here we provide data showing the magnitude of seaweed biodiversity loss and discuss direct and indirect consequences of unplanned urbanization on these communities.     

Lysimeter soil water balance evaluation for an experiment developed in the Southern Brazilian Atlantic Forest region

This study aims at monitoring the behaviour of the rainfall, runoff, drainage, soil water storage, and evapotranspiration variables involved in the water balance measured by lysimeter data. The evaluation of the water balance considered different time scales, where the components were monitored daily and in 10‐day accumulated period intervals. The results demonstrated that in wet periods the soil water content was greater at a depth of 10 cm, whereas in the dry periods a greater concentration was observed at 70 cm depth. At the depth of 30 cm, the lowest values of soil water content were observed for both wet and dry periods. The results, obtained through the use of tensiometers and time domain reflectometry installed internally and externally to the lysimeter, were very close, which was more noticeable during the periods of lower water loss by the soil. The water balance, calculated from the lysimeter data, demonstrated that 70% of the total rainfall was lost by the process of evapotranspiration. The drainage accounted for 27·5% of the precipitated water, highlighting the fact that this component should not be disregarded in the water balance calculation. Copyright © 2011 John Wiley & Sons, Ltd.     

U–Pb and Sm–Nd geochronology of amphibolites from the Curaçá Belt, São Francisco Craton, Brazil: Tectonic implications

The Curaçá terrane is part of the Itabuna–Salvador–Curaçá (I–S–C) Paleoproterozoic orogen in the São Francisco craton, northeastern Brazil, and comprises supracrustal rocks, gneisses of their probable basement, amphibolites, and mafic-ultramafic Cu-bearing bodies (including the Caraíba Cu-Mine), all affected by D₁-D₃ deformation events associated to M₁-M₃ metamorphism under high-T granulite and amphibolite facies, and assisted by G₁-G₃ tonalitic-granodioritic-granitic intrusions. U–Pb and Sm–Nd Thermal Ionization Mass Spectrometry (TIMS) isotopic data from amphibolite, tonalite, and granite, sampled in a well-known outcrop, indicate partial reset and heterogeneous modification of the original isotopic systems, attributable to deformation and metamorphism. The ages obtained from these systems agree with each other, and also with other previously published U–Pb data, and imply that 2.6 Ga is the crystallization age of the protolith of the amphibolite. Together with key structural relationships, they also indicate a 2.08–2.05 Ga interval for M₃ metamorphism, and make even a less precise age (2.2–2.3 Ga) acceptable, as it suggests contamination in the amphibolite with material in a syn-D₂ tonalite crystallized 2248 ± 36 Ma ago. The new data demonstrate the existence of Neoarchean fragments of both oceanic and continental crusts and constrain the Archean-Paleoproterozoic development of the Curaçá belt, the I–S–C orogen, and the São Francisco craton.     

Discussion of “Geopolymers Based on Recycled Glass Powder for Soil Stabilization” Jair de Jesús Arrieta Baldovino; Ronaldo dos Santos Izzo; Juliana Lundgren Rose; Mônica Angélica Avanci

Geotechnical and Geological Engineering - Discussers offered comments to enhance results analysis. An alternative evaluation was proposed using the η/Biv index, where the Biv parameter, named...     

Long-term TNT and DNT contamination: 1-D modeling of natural attenuation in the vadose zone: case study,Portugal

The vadose zone of a trinitrotoluene (TNT) and dinitrotoluene (DNT) contaminated site was investigated to assess the mobility of those explosives under natural conditions. Located in the left margin of the River Tejo Basin, Portugal, the site is located on unconsolidated sediments. Wastewaters associated with the 50-year explosives production were disposed in excavated ponds, from where water would infiltrate and pollute the unsaturated and saturated parts of the local aquifers. Two boreholes were drilled to 9 m depth in such a former waste pond to investigate the contaminant’s fate in the vadose zone. Sediment samples were taken every 1–2 m for analysis of the poly-nitroaromatics (p-NACs) and organic volatile compounds, pH, organic carbon content, cation exchange capacity and grain size analysis. The main contaminant was TNT representing >70 % of the total p-NACs concentration that peaked approximately 7 mg/kg in one borehole, even if the median in both boreholes was of ~1 mg/kg. DNT was 4–30 % of the total p-NACs and nitrotoluene (NT), up to 5 %. No other (volatile) organic compound was detected. The predominance of TNT as the main contaminant implies that any natural mass reduction has been inefficient to clean the site. Several 1-D model simulations of p-NACs cleaning of the vadose zone under natural conditions indicated that the most probable scenario of combined advection and partitioning will only remove TNT after 10’s of years, whereas DNT and NT will hardly be removed. Such low concentrations and long times for the p-NACs removal, suggest that by now those compounds have been washed-out to a level below standard limits.     

High efficacy on diclofenac removal by activated carbon produced from potato peel waste

In the present study, a novel porous carbon obtained by K₂CO₃ activation of potato peel waste under optimized conditions was applied for the first time as liquid-phase adsorbent of sodium diclofenac in parallel with a commercial activated carbon. The biomass-activated carbon presented an apparent surface area of 866 m² g^?1 and well-developed microporous structure with a large amount of ultramicropores. The obtained carbon presented leaching and ecotoxicological properties compatible with its safe application to aqueous medium. Kinetic data of laboratory-made and commercial sample were best fitted by the pseudo-second-order model. The commercial carbon presented higher uptake of diclofenac, but the biomass carbon presented the higher adsorption rate which was associated with its higher hydrophilic nature which favoured external mass transfer. Both adsorbents presented adsorption isotherms that were best fitted by Langmuir model. The biomass carbon and the commercial carbon presented adsorption monolayer capacities of 69 and 146 mg g^?1, and Langmuir constants of 0.38 and 1.02 L mg^?1, respectively. The better performance of the commercial sample was related to its slightly higher micropore volume, but the most remarkable effect was the competition of water molecules in the biomass carbon.     

Disaggregating population density of the European Union with CORINE land cover

This article describes and compares six disaggregation methods used to produce a dasymetric population density grid of the European Union at a 100 m resolution. Population data were initially available at commune level. The main ancillary information source was CORINE land cover, a land cover map distributed by the European Environment Agency. Information from the Eurostat point survey, land use/cover area frame survey, was also integrated in the parameter estimation of some of the approaches tested. Accurate population data for 1 km cell grids were provided by the Statistical Offices of Austria, Denmark, Finland, the Netherlands, Northern Ireland, Estonia and Sweden. These data provided the basic reference to quantify the accuracy of each method. The best results were obtained with a modified version of the limiting variable method (Eicher, C. and Brewer, C., 2001. Dasymetric mapping and areal interpolation: implementation and evaluation. Cartography and Geographic Information Science, 28, 125–138) that could be implemented, thanks to the national reference grids. For other methods the parameters could be estimated without using the reference grids; among them a method based on logit regression gave the best results. Compared with the traditional choropleth maps that represent a homogeneous density in each commune, the accuracy improvement of the disaggregated maps ranged between 20% and 67% (between 46% and 67% for the best method).     

MPA as management tools for small-scale fisheries: The case study of Arrábida Marine Protected Area (Portugal)

Marine protected areas (MPA) have been widely suggested as a tool for both fisheries management and conservation goals. These multiple objectives are hard to achieve simultaneously as sustainable development implies the balance between the specific interests of conservation and economical activities. MPA success, namely for fisheries management, entails the implementation of restrictive measures that in a short-time frame may have negative effects on local fishermen communities. It is extremely important to evaluate their performance and effectiveness aiming at a quasi-optimal management, minimizing potential impacts on the social domain. In this study, a methodology for assessing the effectiveness of MPA as a small-scale fisheries management tool was developed, based on a set of indicators grouped in four dimensions (ecological, economic, social and management and governance). The indicators were scored individually according to an original score scale of five values and a median score was calculated for every dimension. Finally, the median overall score was calculated including the scores of the four dimensions. The scores were attributed for two distinct periods: before and after MPA implementation, in order to evaluate the performance of MPA. This methodology can be applied even with few scientific data available and taking into account experts and stakeholders’ judgements. The Arrábida MPA (Portugal) was used as a case study and it was found that with the implementation of the MPA social and economical aspects were impaired (median scores decreased near one value for the period after MPA implementation), while the other two dimensions showed an improvement trend. Thus, the overall score was the same before and after MPA implementation, an intermediate scale score. Results from the application of this method can give important indications about the state of an MPA and evaluate if the initial goals are being achieved through the implemented measures. The method is of easy communication and can be a useful tool for decision making and fisheries management processes.     

Application of Laser‐Induced Breakdown Spectroscopy and Hyperspectral Images for Direct Evaluation of Chemical Elemental Profiles of Coprolites

This study demonstrates the application of laser‐induced breakdown spectroscopy (LIBS) and hyperspectral imaging to the investigation of coprolite and fossil samples. Solid samples from the Permian (seven coprolites and one fossil), Cretaceous (one coprolite) and Oligo‐Miocene (two coprolites) periods were directly analysed, and emission spectra from 186 to 1042 nm were obtained in several areas covering coprolite/fossil and rock material. Initial exploratory analyses were performed using principal component analysis with the data set normalised by the norm (Euclidean norm = 1). After identification and selection of emission lines of eleven elements (Al, Ca, Cr, Fe, K, Mg, Mn, Na, Ni, P and Si), the signals were normalised again by the relative intensity of the selected element. Phosphorus was identified mainly in the coprolites, while K and Na were primarily found in the rock material. In several cases, there was a positive correlation between Ca and P. A sample from the Oligo‐Miocene series was also analysed using inductively coupled plasma‐optical emission spectrometry (ICP‐OES) (rock and coprolites were analysed separately). Based on the quantitative results from ICP‐OES, it was confirmed that the tendency was the same as that observed with the results obtained from LIBS directly in the solid sample.