Coesite in suevites from the Chesapeake Bay impact structure

The occurrence of coesite in suevites from the Chesapeake Bay impact structure is confirmed within a variety of textural domains in situ by Raman spectroscopy for the first time and in mechanically separated grains by X‐ray diffraction. Microtextures of coesite identified in situ investigated under transmitted light and by scanning electron microscope reveal coesite as micrometer‐sized grains (1–3 μm) within amorphous silica of impact‐melt clasts and as submicrometer‐sized grains and polycrystalline aggregates within shocked quartz grains. Coesite‐bearing quartz grains are present both idiomorphically with original grain margins intact and as highly strained grains that underwent shock‐produced plastic deformation. Coesite commonly occurs in plastically deformed quartz grains within domains that appear brown (toasted) in transmitted light and rarely within quartz of spheroidal texture. The coesite likely developed by a mechanism of solid‐state transformation from precursor quartz. Raman spectroscopy also showed a series of unidentified peaks associated with shocked quartz grains that likely represent unidentified silica phases, possibly including a moganite‐like phase that has not previously been associated with coesite.     

Geochemical homogeneity of a long-lived,large silicic system; evidence from the Cerro Galán caldera,NW Argentina

By applying a number of analytical techniques across a spectrum of spatial scales (centimeter to micrometer) in juvenile components, we show that the Cerro Galán volcanic system has repeatedly erupted magmas with nearly identical geochemistries over >3.5 Myr. The Cerro Galán system produced nine ignimbrites (∼5.6 to 2 Ma) with a cumulative volume of >1,200 km³ (DRE; dense rock equivalent) of calc-alkaline, high-K rhyodacitic magmas (68–71 wt.% SiO₂). The mineralogy is broadly constant throughout the eruptive sequence, comprising plagioclase, quartz, biotite, Fe–Ti oxides, apatite, and titanite. Early ignimbrite magmas also contained amphibole, while the final eruption, the most voluminous Cerro Galán ignimbrite (CGI; 2.08 ± 0.02 Ma) erupted a magma containing rare amphibole, but significant sanidine. Each ignimbrite contains two main juvenile clast types; dominant “white” pumice and ubiquitous but subordinate “grey” pumice. Fe–Ti oxide and amphibole-plagioclase thermometry coupled with amphibole barometry suggest that the grey pumice originated from potentially hotter and deeper magmas (800–840°C, 3–5 kbar) than the more voluminous white pumice (770–810°C, 1.5–2.5 kbar). The grey pumice is interpreted to represent the parental magmas to the Galán system emplaced into the upper crust from a deeper storage zone. Most inter-ignimbrite variations can be accounted for by differences in modal mineralogy and crystal contents that vary from 40 to 55 vol.% on a vesicle-free basis. Geochemical modeling shows that subtle bulk-rock variations in Ta, Y, Nb, Dy, and Yb between the Galán ignimbrites can be reconciled with differences in amounts of crystal fractionation from the “grey” parent magma. The amount of fractionation is inversely correlated with volume; the CGI (∼630 km³) and Real Grande Ignimbrite (∼390 km³) return higher F values (proportion of liquid remaining) than the older Toconquis Group ignimbrites (<50 km³), implying less crystal fractionation took place during the upper-crustal evolution of these larger volume magmas. We attribute this relationship to variations in magma chamber geometry; the younger, largest volume ignimbrites came from flat sill-like magma chambers, reducing the relative proportion of sidewall crystallization and fractionation compared to the older, smaller-volume ignimbrite eruptions. The grey pumice clasts also show evidence of silicic recharge throughout the history of the Cerro Galán system, and recharge days prior to eruption has previously been suggested based on reversely zoned (OH and Cl) apatite phenocrysts. A rare population of plagioclase phenocrysts with thin An-rich rims in juvenile clasts in many ignimbrites supports the importance of recharge in the evolution and potential triggering of eruptions. This study extends the notion that large volumes of nearly identical silicic magmas can be generated repeatedly, producing prolonged geochemical homogeneity from a long-lived magma source in a subduction zone volcanic setting. At Cerro Galán, we propose that there is a zone between mantle magma input and upper crustal chambers, where magmas are geochemically “buffered”, producing the underlying geochemical and isotopic signatures. This produces the same parental magmas that are delivered repeatedly to the upper crust. A lower-crustal MASH (melting, assimilation, storage, and homogenization) zone is proposed to act as this buffer zone. Subsequent upper crustal magmatic processes serve only to slightly modify the geochemistry of the magmas.     

Hazard assessment at Mount Etna using a hybrid lava flow inundation model and satellite-based land classification

Using a lava flow emplacement model and a satellite-based land cover classification, we produce a map to allow assessment of the type and quantity of natural, agricultural and urban land cover at risk from lava flow invasion. The first step is to produce lava effusion rate contours, i.e., lines linking distances down a volcano??s flank that a lava flow will likely extend if fed at a given effusion rate from a predetermined vent zone. This involves first identifying a vent mask and then running a downhill flow path model from the edge of every pixel around the vent mask perimeter to the edge of the DEM. To do this, we run a stochastic model whereby the flow path is projected 1,000 times from every pixel around the vent mask perimeter with random noise being added to the DEM with each run so that a slightly different flow path is generated with each run. The FLOWGO lava flow model is then run down each path, at a series of effusion rates, to determine likely run-out distance for channel-fed flow extending down each path. These results are used to plot effusion rate contours. Finally, effusion rate contours are projected onto a land classification map (produced from an ASTER image of Etna) to assess the type and amount of each land cover class falling within each contour. The resulting maps are designed to provide a quick look-up capability to assess the type of land at risk from lava extending from any location at a range of likely effusion rates. For our first (2,000 m) vent zone case used for Etna, we find a total of area of ~680 km² is at risk from flows fed at 40 m³ s^?1, of which ~6 km² is urban, ~150 km² is agriculture and ~270 km² is grass/woodland. The model can also be run for specific cases, where we find that Etna??s 1669 vent location, if active today, would likely inundate almost 11 km² of urban land, as well as 15.6 km² of agricultural land, including 9.5 km² of olive groves and 5.2 km² of vineyards and fruit/nut orchards.     

Commercial fisheries closures in marine protected areas on Canada’s Pacific coast: The exception,not the rule

No-take marine protected areas (MPAs), where all fishing is prohibited, have been shown to provide benefits that include greater productivity of fish stocks due to increased densities, average sizes, and reproductive output. A critical component of this success is the effective management of MPAs to ensure that only those activities deemed permissible, are allowed to occur. As of 2008, 161 MPAs had been designated on the Pacific coast of Canada by federal, provincial or municipal authorities. The objective of this study was to discover how many of these MPAs are intended to provide full protection to habitats and species from commercial fishing and whether management measures were put in place to actualize this conservation intent. The comprehensive spatial dataset was built illustrating commercial fisheries closures and this was overlaid with MPA locations in a GIS. The majority of MPAs were designated as IUCN Strict Nature Reserve (Type Ia), Wilderness Area (Type Ib), and National Park (Type II) marine reserves, which are intended to be free from exploitation. It was found that 160 of the 161 MPAs are open to some commercial harvesting within their bounds. One small municipal MPA and portions of three other MPAs are not open to commercial harvesting. The incongruence between management intent and fisheries permitted suggests a management failure between designation of MPAs and implementation of fisheries management regulations.     

The SOLAS air-sea gas exchange experiment (SAGE) 2004

The SOLAS air-sea gas exchange experiment (SAGE) was a multiple-objective study investigating gas-transfer processes and the influence of iron fertilisation on biologically driven gas exchange in high-nitrate low-silicic acid low-chlorophyll (HNLSiLC) Sub-Antarctic waters characteristic of the expansive subpolar zone of the southern oceans. This paper provides a general introduction and summary of the main experimental findings. The release site was selected from a pre-voyage desktop study of environmental parameters to be in the south-west Bounty Trough (46.5°S 172.5°E) to the south-east of New Zealand and the experiment was conducted between mid-March and mid-April 2004. In common with other mesoscale iron addition experiments (FeAX’s), SAGE was designed as a Lagrangian study, quantifying key biological and physical drivers influencing the air-sea gas exchange processes of CO₂, DMS and other biogenic gases associated with an iron-induced phytoplankton bloom. A dual tracer SF₆/³He release enabled quantification of both the lateral evolution of a labelled volume (patch) of ocean and the air-sea tracer exchange at tenths of kilometer scale, in conjunction with the iron fertilisation. Estimates from the dual-tracer experiment found a quadratic dependency of the gas exchange coefficient on windspeed that is widely applicable and describe air-sea gas exchange in strong wind regimes. Within the patch, local and micrometeorological gas exchange process studies (100 m scale) and physical variables such as near-surface turbulence, temperature microstructure at the interface, wave properties and windspeed were quantified to further assist the development of gas exchange models for high-wind environments.There was a significant increase in the photosynthetic competence (F_v/F_m) of resident phytoplankton within the first day following iron addition, but in contrast to other FeAX’s, rates of net primary production and column-integrated chlorophyll a concentrations had only doubled relative to the unfertilised surrounding waters by the end of the experiment. After 15 days and four iron additions totalling 1.1 ton Fe²⁺, this was a very modest response compared to other mesoscale iron enrichment experiments. An investigation of the factors limiting bloom development considered co-limitation by light and other nutrients, the phytoplankton seed-stock and grazing regulation. Whilst incident light levels and the initial Si:N ratio were the lowest recorded in all FeAXs to date, there was only a small seed-stock of diatoms (less than 1% of biomass) and the main response to iron addition was by the picophytoplankton. A high rate of dilution of the fertilised patch relative to phytoplankton growth rate, the greater than expected depth of the surface mixed layer and microzooplankton grazing were all considered as factors that prevented significant biomass accumulation. In line with the limited response, the enhanced biological draw-down of pCO₂ was small and masked by a general increase in pCO₂ due to mixing with higher pCO₂ waters. The DMS precursor DMSP was kept in check through grazing activity and in contrast to most FeAX’s dissolved dimethylsulfide (DMS) concentration declined through the experiment. SAGE is an important low-end member in the range of responses to iron addition in FeAX’s. In the context of iron fertilisation as a geoengineering tool for atmospheric CO₂ removal, SAGE has clearly demonstrated that a significant proportion of the low iron ocean may not produce a phytoplankton bloom in response to iron addition.     

Surface deformation related to the 2008 Wenchuan earthquake,and mountain building of the Longmen Shan,eastern Tibetan Plateau

The 12 May 2008 M_s 8.0 Wenchuan earthquake, China, was one of largest continental thrusting events worldwide. Based on interpretations of post-earthquake high-resolution remote sensing images and field surveys, we investigated the geometry, geomorphology, and kinematics of co-seismic surface ruptures, as well as seismic and geologic hazards along the Longmen Shan fold-and-thrust belt. Our results indicate that the Wenchuan earthquake occurred along the NE–SW-trending Yingxiu–Beichuan and Guanxian–Anxian faults in the Longmen Shan fold-and-thrust belt. The main surface rupture zones along the Yingxiu–Beichuan and Guanxian–Anxian fault zones are approximately 235 and 72 km in length, respectively. These sub-parallel ruptures may merge at depth. The Yingxiu–Donghekou surface rupture zone can be divided into four segments separated by discontinuities that appear as step-overs or bends in map view. Surface deformation is characterized by oblique reverse faulting with a maximum vertical displacement of approximately 10 m in areas around Beichuan County. Earthquake-related disasters (e.g., landslides) are linearly distributed along the surface rupture zones and associated river valleys.The Wenchuan earthquake provides new insights into the nature of mountain building within the Longmen Shan, eastern Tibetan Plateau. The total crustal shortening accommodated by this great earthquake was as much as 8.5 m, with a maximum vertical uplift of approximately 10 m. The present results suggest that ongoing mountain building of the Longmen Shan is driven mainly by crustal shortening and uplift related to repeated large seismic events such as the 2008 Wenchuan earthquake. Furthermore, rapid erosion within the Longmen Shan fold-and-thrust belt occurs along deep valleys and rupture zones following the occurrence of large-scale landslides triggered by earthquakes. Consequently, we suggest that crustal shortening related to repeated great seismic events, together with isostatic rebound induced by rapid erosion-related unloading, is a key component of the geodynamics that drive ongoing mountain building on the eastern Tibetan Plateau.     

Climate change beliefs, concerns, and attitudes toward adaptation and mitigation among farmers in the Midwestern United States

A February 2012 survey of almost 5,000 farmers across a region of the U.S. that produces more than half of the nation’s corn and soybean revealed that 66 % of farmers believed climate change is occurring (8 % mostly anthropogenic, 33 % equally human and natural, 25 % mostly natural), while 31 % were uncertain and 3.5 % did not believe that climate change is occurring. Results of initial analyses indicate that farmers’ beliefs about climate change and its causes vary considerably, and the relationships between those beliefs, concern about the potential impacts of climate change, and attitudes toward adaptive and mitigative action differ in systematic ways. Farmers who believed that climate change is occurring and attributable to human activity were significantly more likely to express concern about impacts and support adaptive and mitigative action. On the other hand, farmers who attributed climate change to natural causes, were uncertain about whether it is occurring, or did not believe that it is occurring were less concerned, less supportive of adaptation, and much less likely to support government and individual mitigative action. Results suggest that outreach with farmers should account for these covariances in belief, concerns, and attitudes toward adaptation and mitigation.     

Farmer beliefs and concerns about climate change and attitudes toward adaptation and mitigation: Evidence from Iowa

Agriculture is both vulnerable to climate change impacts and a significant source of greenhouse gases. Increasing agriculture’s resilience and reducing its contribution to climate change are societal priorities. Survey data collected from Iowa farmers are analyzed to answer the related research questions: (1) do farmers support adaptation and mitigation actions, and (2) do beliefs and concerns about climate change influence those attitudes. Results indicate that farmers who were concerned about the impacts of climate change on agriculture and attributed it to human activities had more positive attitudes toward both adaptive and mitigative management strategies. Farmers who believed that climate change is not a problem because human ingenuity will enable adaptations and who did not believe climate change is occurring or believed it is a natural phenomenon—a substantial percentage of farmers—tended not to support mitigation.     

On coastal flow in the northeast gulf of Alaska near yakutat 1

Abstract

Seasonal maps of geopotential topography and salinity at 10 m were prepared for a region in the northeast Gulf of Alaska near Yakutat. Coastal waters in this region receive considerable runoff in late summer, but the dilution does not result in a greatly intensified coastal flow. Baroclinic coastal flow in the northeast Gulf appears to be weaker than the coastal flow (Kenai Current) to the west along the Kenai Peninsula and in Shelikof Strait.