弱流场调制下的海面微波散射模拟研究

根据海面微波散射的多尺度模型以及波流相互作用理论,对一维弱流场调制下的海面微波散射截面进行了数值模拟。结果表明,利用数值方法直接求解波作用量方程获得的海浪调制谱并结合多尺度模型可以较好地模拟弱流场引起的雷达散射截面的变化。内波等海洋现象调制了海浪谱,使得雷达散射截面反映出这些海洋特征,整个调制过程的模拟对于分析这些海洋现象并更好地利用其雷达数据具有重要意义。     

Nickel-copper mineralization at Talnotry,Newton Stewart,Scotland

Summary Nickel-copper mineralization occurs near the base of a diorite intrusion close to its contact with hornfelsed Ordovician and Silurian shales and greywackes. The principal ore minerals are nickeline, gersdorffite, pyrrhotine, pentlandite and chalcopyrite with minor amounts of molybdenite, tellurobismutite, gold, sphalerite and argentopentlandite. Pyrite, marcasite, violarite and goethite also occur but are interpreted as later alteration products. Much of the pyrrhotine-rich mineralization at the base of the intrusion is in the form of blebs and interstitial aggregates with amphiboles, plagioclase feldspar, biotite, chlorite and quartz. Chalcopyrite-rich and nickeline-gersdorffite-rich mineralization occurs above this and immediately below unmineralized diorite in the form of patches, lenticular masses and stringers along joints and fractures.Whole rock and ore analyses and electron microprobe data on the silicates, sulphides and sulpharsenides are presented.The unmineralized diorite has low SiO₂ and high MgO contents compared to typical diorites and relatively high Cr, Ni and Ti trace element values. In the mineralized diorite, platinum-group elements occur in very low concentrations in the pyrrhotineand chalcopyrite-rich assemblages but Pt, Pd and Au show significant enrichment in the nickeline-gersdorffite-rich mineralization.A magmatic origin for the mineralization is proposed rather than formation by hydrothermal solutions or metasomatism.

---

Die nickel-kupfer vererzung von Talnotry, Newton Stewart, Schottland

Zusammenfassung Die Nickel-Kupfer Vererzung befindet sich im Kontaktbereich einer Dioritintrusion mit hornfelsdurchdrungenen silurischen und ordovizischen Grauwacken. Die am häufigsten auftretenden Erzmineralien sind Nickelin, Gersdorffit, Pyrrhotin, Pentlandit, und Chalcopyrit mit kleineren Mengen von Molybdenit, Tellurwismuth, Gold, Sphalerit und Argentopentlandit. Weiters treten als spätere Umwandlungsprodukte Pyrit, Markasit, Violarit und Goethit auf. Ein großer Teil der Pyrrhotin-reichen Vererzung am Fuße des eingedrungenen Diorits bildet fleckige, lückenfüllende Aggregate zwischen den Silikatphasen (Amphibol, Plagioklas, Biotit, Chlorit, Quarz). Die Chalcopyrit- und Nickelin-Gersdorffit-reiche Vererzung tritt zwischen dem unvererzten Diorit im Hangenden und der Pyrrhotin-reichen Vererzung im Liegenden als linsige, lappenartige Konzentration und entlang von Fugen und Brücken auf.Vollgesteins-Analysen sowie ausgewählte Erzanalysen und Mikrosondenergebnisse der Silikate, Sulfide und Sulfarsenide liegen vor.Im Unterschied zu den typischen Dioriten zeigt der unvererzte Diorit einen niedrigen SiO₂ und hohen MgO Gehalt und relativ hohe Cr, Ni und Ti Spurenelementwerte. Die Platingruppenelemente sind in den Pyrrhotin- und Chalcopyrit-reichen Vererzungen nur schwach vertreten, jedoch sind Pt, Pd und An in der Gersdorffit-reichen Vererzung stark angereichert.Ein magmatischer Ursprung dieser Vererzung, im Gegensatz zu einer metasomatischen Entstehung oder Bildung aus hydrothermalen Lösungen wird vermutet.

---

---

With 3 Figures     

Emerging coral diseases: a temperature‐driven process?

In the last few decades there has been a surge in research focusing on coral disease. While climate change, specifically rising sea surface temperature, has been proposed as a major and growing driver of the emergence of marine diseases, to date a solid connection between disease epizootics and elevated sea surface temperature has not been established. However, a wealth of data now exists, compiled from many different perspectives, that may support such a connection. In this work we provide a comprehensive review targeting one coral disease, black band disease, that spans the infection process, pathobiology, and epizootiology, and links specific mechanisms of the disease process to increasing temperatures. This temperature‐driven pattern of infection can be expanded to include similar processes associated with other temperature‐related coral diseases. The conclusions presented here are based upon the results of many studies using a diverse suite of approaches that have been synthesized to argue that the emergence and continuing spread of black band disease is linked to warming sea surface temperatures. In summary, as global ocean temperatures increase seasonally and over decades, the environment shifts to become more favorable for the growth of potentially pathogenic microorganisms endemic to the immediate environment of the reef. The increase in the relative number of potential pathogens in the microbial community produces microenvironments conducive to the growth of other potential pathogens, leading to infection by a polymicrobial consortium. This consortium is easily perturbed by a (seasonal) temperature decrease, but remains associated with the coral host and can be reactivated with a subsequent seasonal increase in temperature, resulting in a cycle of temperature‐dependent disease emergence.     

Ramifications of high in-situ temperatures for laboratory testing and inferred stress states of unlithified sediments – A case study from the Nankai margin

The recovery of drill cores involves changes in pressure and temperature conditions, which inevitably alter the mechanical properties of unlithified sediments. While expansion from unloading after core recovery is well studied, the effects from cooling on standard geotechnical tests are commonly neglected. Along the central portion of the Nankai margin sediments were recovered from high in-situ temperatures of up to 110 °C during IODP Leg 190. So far, the interpretation of the consolidation state of the Lower Shikoku Basin facies (LSB) entering the accretionary Nankai margin is ambiguous. Results from laboratory consolidation tests at room temperature show high pre-consolidation stresses. These were interpreted as hardening caused by cementation, while the field-based porosity vs. depth trend points towards normal consolidation. As an explanation for this discrepancy, the change of the mechanical properties by cooling from in-situ to laboratory conditions is proposed. In this paper, the results of a thermo-mechanical model are compared to published field data. This comparison suggests that the observed hardening is at least partially an artefact from cooling during core recovery, and that the strata may be considered normally consolidated to slightly overconsolidated. The latter can be explained by minor cementation or the influence of secondary consolidation. The results suggest that cooling from high in-situ temperatures may be important for the interpretation of the consolidation state of other sedimentary successions elsewhere.     

Cadmium release caused by the die-back of the saltmarsh cord grass Spartina anglica in Poole Harbour (UK)

As in many other areas, the perennial cord grass Spartina anglica C.E. Hubbard has been extremely successful at colonising the English and Irish south coasts, but it is dying back for reasons that are not completely understood. The present study considers the relationship between die-back and metal concentrations in estuarine sediment. No obvious impact of the metal contamination on the S. anglica growth/die-back could be detected in the study zone, Poole Harbour, although the die-back did seem to have substantially influenced the metal concentrations in the sediments of the estuary. Based on core profiles, the remaining patches of S. anglica still retain elevated concentrations and the overall cadmium concentrations in the sediments have risen since 1925. However, considerable quantities of the cadmium stored in the sediment by S. anglica appear to have been washed out rapidly in the die-back zones. Should serious erosion of the saltmarsh occur, triggered for example by sea-level rise, then sudden and high levels of cadmium release may cause harmful effects to marine biota.     

Analysis of the spatial variation of heavy metals in the Guadiana Estuary sediments (SW Iberian Peninsula) based on GIS-mapping techniques

This work reveals the usefulness of the GIS (Geographic Information Systems) mapping techniques to show the distribution of pollutants along an estuarine environment, as the final stage of a thorough study. In the case of study, the environmental quality of the sediments in the Guadiana river estuary was determined by means of a complete geochemical characterization consisting on the calculation of enrichment factors for the most important metals and metalloids (compared with the local background of non-contaminated sediments). The obtained results were depicted in “enrichment distribution maps” which evidenced a distribution of the elements in two groups: Group-I, elements with natural origin (Al, Fe, Mn, Co, and Cr) distributed homogeneously along the basin, and Group-II, elements associated to anthropic origin (As, Cd, Cu, Pb, Ni and Zn) with clear punctual sources besides a high concentration all over the estuary. The enrichment factors for the elements of Group-II are indicative of the existence of a noticeable diffuse historical mining pollution associated with the acid mine drainage generated in the internal zones of the basin, which could overlap minor pollution inputs from other human activities. The obtained results lead us to a reconsideration of the traditionally thought “unpolluted” environment when it was compared to nearby estuaries.     

Ecosystem-based management institutional design: Balance between federal,state, and local governments within the Gulf of Mexico Alliance

We present a case study of the organizational framework of the Gulf of Mexico Alliance (GOMA), which was implemented to promote the use of ecosystem-based management (EBM) at a regional level. GOMA is a state-led initiative formed to protect and restore coastal and marine resources of the Gulf of Mexico. Representatives of the US Gulf States, together with their federal partners, clearly defined ecological, social, and economic short- and long-term objectives to be reached through regional collaborations. The aim of this paper is to show how GOMA, and particularly the Ecosystem Integration and Assessment Priority Issue Team, in its attempt to apply ecosystem approaches to manage marine resources, modified the common organizational scheme by implementing partnerships at various governmental (federal, state, local) and nongovernmental levels. We address the following major points considered to be of importance for EBM implementation: (1) multilevel cooperation, (2) stakeholders’ involvement, (3) sharing of information, (4) bridging science and policy, and (5) consensus-based decision making.