Surface changes on crystalline stones due to salt crystallisation

This study assesses the changes on the surface of crystalline stones due to salt crystallisation. Efflorescence was forced to grow on the surface of granite and marbles through 60 cycles of salt crystallisation with sodium sulphate. Changes on surface roughness, gloss and colour were measured every 15 cycles and the specimens were examined with naked eye and SEM. Sodium sulphate produces damage which depends on mineral composition. Results show that granites experience a mechanical decay with an increase in roughness. Peaks of mica can be observed on the surface and cracks widen and grow deeper. Colour and gloss do not show any significant change, although gloss decreases with an increase in surface roughness. In marbles, the decay is mainly chemical. Surface roughness increases due to dissolution of the calcite. White marbles exhibit yellowing. Gloss decreases during the first cycles—as grain boundaries become more visible—but tends to regain almost its initial value as the number of cycles increases. In this case, gloss does not show any relation with surface roughness.     

Effects of sludge pretreatment on sludge reduction in a lab-scale anaerobic/anoxic/oxic system treating domestic wastewater

Excess sludge disposal is one of the serious challenges in biological wastewater treatment. Reduction of sludge production would be an ideal way to solve sludge-associated problems rather than the post-treatment of the sludge produced. In this study, a new wastewater treatment process combining anaerobic/anoxic/oxic system with thermochemical sludge pretreatment was tested in a laboratory scale experiment. In this study, the effects of the sludge pretreatment on the excess sludge production in anaerobic/anoxic/oxic were investigated. The system was operated in two Runs (1 and 2). In Run 1, the system was operated as a reference and in Run 2, a part of the mixed liquid was pretreated thermochemically and was returned to the bioreactor. The average solubilization efficiency of pretreated sludge was found to be about 35 % during the study period of 220 days. Sludge production rate in Run 2 was less than that in Run 1 by about 52 %. Total phosphorous was removed by enhanced biological phosphorous removal with the removal efficiency of 83–87 % and 81–83 % for Run 1 and Run 2, respectively. Total nitrogen removal in Run 2 (79–82 %) was slightly higher than that in Run 1 (68–75 %). The mixed liquor suspended solids/mixed liquor volatile suspended solids ratio was identical after both runs in the range 78–83 %. The effluent water qualities were not significantly affected when operated with thermochemical pretreatment at pH 11 and 60 °C for 3 h during 7 months. From the present study it is concluded that thermochemical sludge pretreatment of anaerobic/anoxic/oxic process plays an important role in reduction of sludge production.     

Cordieritite and Leucogranite Formation during Emplacement of Highly Peraluminous Magma: the El Pilon Granite Complex (Sierras Pampeanas, Argentina)

Cordieritites and highly peraluminous granites within the ElPilón granite complex, Sierras Pampeanas, Argentina,were emplaced during a medium-P, high-T metamorphic event duringthe initial decompression of a Cambrian orogen along the southwesternmargin of Gondwana. Very fresh orbicular and massive cordierititebodies with up to 90% cordieritite are genetically associatedwith a cordierite monzogranite pluton and a larger body of porphyriticgranodiorite. The petrogenesis of this association has beenstudied using petrographical, mineralogical, thermobarometric,geochemical, geochronological and isotope methods. The graniticmagmas were formed by anatexis of mid-crustal metamorphic rocksformed earlier in the Pampean orogeny. The cordieritites appearat the top of feeder conduits that connected the source regionlocated at     

Modelling nitrogen and oxygen isotope fractionation during denitrification in a lacustrine redox-transition zone

The stable isotope composition (δ¹⁵N and δ¹⁸O) of nitrate was measured during Summer 1999 in the anaerobic hypolimnion of eutrophic Lake Lugano (Switzerland). Denitrification was demonstrated by a progressive nitrate depletion coupled to increasing δ¹⁵N and δ¹⁸O values for residual nitrate. Maximum δ¹⁵N and δ¹⁸O values amounted to 27.2 and 15.7‰, respectively.¹⁵N and ¹⁸O enrichment factors for denitrification (ε) were estimated using a closed-system model and a dynamic diffusion-reaction model. Using the Rayleigh equation (closed-system approach), we obtained ε values of −11.2 and −6.6‰ for nitrogen and oxygen, respectively. The average ε values derived using the diffusion-reaction model were determined to be −20.7 ± 3.8 for nitrogen and −11.0 ± 1.7 for oxygen. Both N and O isotope fractionation appeared to be lower when denitrification rates where high, possibly in association with high organic carbon availability. In addition, variations in the isotope effects may be attributed to the variable importance of sedimentary denitrification having only a small isotope effect on the water column. The combined measurement of N and O isotope ratios in nitrate revealed that coupled nitrification-denitrification in the open-water was of minor importance. This is the first study of nitrogen and oxygen isotope effects associated with microbial denitrification in a natural lake. Moreover, this study confirms the high potential of δ¹⁸O of nitrate as a valuable biogeochemical tracer in aquatic systems, complementing nitrate δ¹⁵N.     

REE distribution in the resin-asphaltene fractions as a geochemical criterion for identification of sources of trace elements in oil

This paper reports REE data on resin-asphaltene components of oil from six oil-gas-bearing provinces and on bitumoids from inferred oil-source rocks (domanikites and bazhenites). It was shown that, regardless of geological-tectonic structure of the regions, oil composition, depth of reservoirs, and host lithologies, oil exhibits significant REE fractionation, and, unlike bitumoids, positive Eu anomaly. The (Eu/Sm)_n ratio increases from asphaltenes to resins and further to oils. Based on REE distribution in oil, source rocks, and bitumoids, it was concluded that deep-seated fluids were one of the possible sources that defined the trace element composition of oil.     

3d transition metal L-edge X-ray absorption studies of the dichalcogenides of Fe, Co and Ni

The X-ray absorption spectra of the transition metal L_3,2-edges of the dichalcogenides FeS₂ (pyrite), FeSe₂, FeTe₂, CoS₂, CoSe₂, CoTe₂, NiS₂, NiSe₂ and NiTe₂ have been studied. These spectra are compared with theoretical simulations make using the atomic multiplet approach assuming on octahedral site for the metal atoms. The Ni spectra can be closely simulated using this approach but the Fe and Co spectra show less good fits to the experimental data. The reasons for this and its implications for the use of L-edge spectra in the study of such minerals are discussed in terms of the covalency and the ground states of the compounds; these results indicate the mixing of the ground states increases in the order Ni<Co<Fe.     

Impact of quarrying gypsum in a semidesert karstic area (Sorbas,SE Spain)

The Messinian gypsum of Sorbas is intensively karstified, with hundreds of dolines and numerous, highly unusual exo- and endokarstic forms. Amongst these the tumuli are especially spectacular, as are the large caverns, adorned with numerous speleothems, some of which have not been described anywhere else in the World. The extraction of the gypsum has impacted practically all the elements of the environment (landscape, water, soil, subsoil, flora, fauna, etc.) and, in particular, all of the karstic forms. In addition to endangering the caves and the natural treasures that they contain, it affects the surface waters, markedly modifying the hydrographic network. Groundwaters, which now occur in the bottom of a quarry, are also affected.