Hydraulic and flood-loss modeling of levee,floodplain, and river management strategies,Middle Mississippi River,USA

In this investigation, four scenarios were used to quantify the balance between the benefits of levees for flood protection and their potential to increase flood risk using Hazards U.S. Multi-Hazard flood-loss software and hydraulic modeling of the Middle Mississippi River (MMR). The goals of this study were (1) to quantify the flood exposure under different flood-control configurations and (2) to assess the relative contributions of various engineered structures and flood-loss strategies to potential flood losses. Removing all the flood-control structures along the MMR, without buyouts or other mitigation, reduced the average flood stages between 2.3 m (100-year flood) and 2.5 m (500-year), but increased the potential flood losses by $4.3–6.7 billion. Removing the agricultural levees downstream of St. Louis decreased the flood stages through the metro region by ~1.0 m for the 100- and 500-year events; flood losses, without buyouts or other mitigation, were increased by $4.3–6.7 billion. Removing the agricultural levees downstream of St. Louis decreased the flood stages through the metro region by ~1.0 m for the 100- and 500-year events; flood losses, without buyouts or other mitigation, were increased by 155 million for the 100-year flood, but were decreased by $109 million for the 500-year flood. Thus, agricultural levees along the MMR protect against small- to medium-size floods (up to the ~100-year flood level) but cause more damage than they prevent during large floods such as the 500-year flood. Buyout costs for the all the buildings within the 500-year floodplain downstream of urban flood-control structures near St. Louis are ~40% less than the cost of repairing the buildings damaged by the 500-year flood. This suggests large-scale buyouts could be the most cost-effective option for flood loss mitigation for properties currently protected by agricultural levees.     

Fractures: Finite-size scaling and multifractals

The distributions of contact area and void space in single fractures in granite rock have been determined experimentally by making metal casts of the void spaces between the fracture surfaces under normal loads. The resulting metal casts on 52 cm diameter core samples show a complex geometry for the flow paths through the fracture. This geometry is analyzed using finite-size scaling. The spanning probabilities and percolation probabilities of the metal casts are calculted as functions of observation scale. Under the highest stresses of 33 MPa and 85 MPa there is a significant size-dependence of the geometric flow properties for observation scales smaller than 2 mm. Based on this data, the macroscopic percolation properties of the extended fracture can be well represented by relatively small core samples, even under normal stresses larger than 33 MPa. The metal casts also have rich multifractal structure that changes with changing stress.     

Trace Metals in Selected Benthic Invertebrates from Belgian Coastal Waters (1981–1996)

Mercury, cadmium, lead, copper, zinc and chromium were assessed in brown shrimp (Crangon crangon), swimming crab (Liocarcinus holsatus), hermit crab (Pagurus bernhardus), starfish (Asterias rubens) and cut trough shell (Spisula subtruncata) from ten sampling stations off the Belgian coast, including three dredge spoils disposal sites. Calculations of time trends indicated that on the whole concentrations of trace metals had significantly decreased since 1981, also on dredged material dumping sites. Starfish and hermit crab were found to be the most promising benthic indicator species for metal contamination. Globally, the location of the sites, including the dredge spoils disposal zones, showed to be of little influence on the concentrations of trace metals.     

Use of suppressive subtractive hybridization and cDNA arrays to discover patterns of altered gene expression in the liver of dihydrotestosterone and 11-ketotestosterone exposed adult male largemouth bass (Micropterus salmoides)

In this study male largemouth bass (LMB) were exposed to the naturally occurring androgens, dihydrotestosterone (DHT) or 11-ketotestosterone (11-KT) in order to identify genes that are differentially regulated by these steroid hormones. Using subtractive hybridization on livers of fish treated with DHT against vehicle control, many novel LMB genes were cloned. These genes were added to our gene library and arrayed. Six genes were up-regulated and five were down-regulated by both androgens. But, each androgen also regulated specific genes. One gene that was identified as a potential androgen marker was spermidine-spermine-N(1)-acetyltransferase that was up-regulated by both androgens. Determining which genes are responsive to natural androgens will help to identify biochemical pathways that are impacted.     

Stochastic assessment of GPS carrier phase measurements for precise static relative positioning

 Global positioning system (GPS) carrier phase measurements are used in all precise static relative positioning applications. The GPS carrier phase measurements are generally processed using the least-squares method, for which both functional and stochastic models need to be carefully defined. Whilst the functional model for precise GPS positioning is well documented in the literature, realistic stochastic modelling for the GPS carrier phase measurements is still both a controversial topic and a difficult task to accomplish in practice. The common practice of assuming that the raw GPS measurements are statistically independent in space and time, and have the same accuracy, is certainly not realistic. Any mis-specification in the stochastic model will inevitably lead to unreliable positioning results. A stochastic assessment procedure has been developed to take into account the heteroscedastic, space- and time-correlated error structure of the GPS measurements. Test results indicate that the reliability of the estimated positioning results is improved by applying the developed stochastic assessment procedure. In addition, the quality of ambiguity resolution can be more realistically evaluated. Received: 13 February 2001 / Accepted: 3 September 2001     

Study of Metal Distribution in Raw and Screened Swine Manure

The growth of industrial swine production over the last few years has led to a growth in concern over effluents generated by the activity. Several elements, mainly toxic metals, can be present in swine wastewater and can have a serious environmental impact. It is important, therefore, to know the metal concentration before the discharge of wastewater. In this work the temporal metal distribution in swine manure and its potential reduction using coarse (2 mm) and fine (<0.45 μm) liquid‐solid separation techniques were investigated. In order to do this, different swine manure sample preparation methods for Al, Ba, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Sr and Zn determination by Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) were tested. The acid mixtures used to digest the manure sample significantly affected the metal recovery. Good analyte recoveries were observed with nitric acid/hydrogen peroxide mixtures or nitric acid/perchloric acid mixtures. Sulfuric acid/hydrogen peroxide mixtures produced inconsistent results and poor recoveries, mainly for Ba and Pb. It was observed that metal concentrations in swine manure varied greatly with time, up to one order of magnitude, due to changes in swine production such as feed and animal numbers. Metals concentrations observed in the raw wastewater exceeded Brazilian limits for discharge into water bodies and recommendations for agricultural use. Results obtained from the liquid‐solid separation study showed that metals in the raw swine manure were not removed with coarse screening. However, the major fraction of metals were removed by filtration (0.45 μm), with the exception of Na, K and Sr. Thus, the use of liquid‐solid separation techniques that capture the fine solid fractions (and associated metals) from raw manure can have a favorable impact on the environment and contribute to swine production wastewater treatment.     

Lithogeochemistry of hypogene, supergene and leached cap samples, berg porphyry copper deposit, British Columbia

In this paper we examine the influence of the development of supergene oxide and sulphide zones on the original hypogene geochemical patterns at the Berg deposit, British Columbia.The deposit, in the alpine zone of the Tahtsa Range, was logged (GEOLOG) and sampled in fourteen diamond drill holes along a N—S section and from outcrop where possible. Anomalous populations of major and trace elements were defined using log probability graphs and a sequential extraction (10% hydrochloric acid— ammonium oxalate — potassium chlorate/hydrochloric acid — nitric/perchloric acids) was used to study the distribution of elements between carbonate, oxide, sulphide and silicate phases.Core logs and assays show that primary ore minerals (chalcopyrite—molybdenite) extend from the outer part of the porphyry intrusion into the surrounding hornfels where the best grades of copper are found close to the intrusive contact. Maximum copper grades, however, result from development of a supergene enrichment blanket. Within the hypogene zone, principal lithogeochemical patterns reflect the differences in composition of the hornfels, originally intermediate to basic volcanics, and the intrusion, as well as the introduction of F and trace metals (Cu, Mo, Pb, Zn and Ag). Distribution of Ag is broadly comparable to that of Cu and Mo whereas anomalous Pb and Zn are present as peripheral haloes around the potential ore zones.Emergence of strongly acidic ground water and precipitation of iron oxides, indicate that leaching processes are active. Furthermore, although primary sulphides, associated with both their oxidation products and secondary sulphides, can still be found in surface samples, sequential extractions on drill core clearly indicate vertical redistribution of copper between oxide, carbonate and sulphide phases. Using ratios of metal concentrations to TiO₂, the surface concentrations of trace metals can be compared with those at depth and the relative amount of enrichment or depletion can be quantified. In highly leached sites the absolute concentrations of Cu, Mn and Zn are low which is reflected in TiO₂ ratios of <1. However, Mo, Pb and Ag are enriched at the same sites (TiO₂ ratios >1). In areas where physical erosion exceeds leaching (topographic lows) primary sulphides co-exist with secondary sulphide and oxide minerals. Here Cu, Mo, Pb, Zn, Mn and Ag are enriched. Fluorine is relatively unaffected by the leaching process. It would appear signature for a cale alkaline Cu and Mo porphyry deposit in an area where outcrop was intensely leached.     

A comparison of boundary layer diffusion schemes in unstable conditions over land

We compare the results of a local and a nonlocal scheme for vertical diffusion in the atmospheric boundary layer with observations at the 200 m tower at Cabauw. This is done for a 12 h period during daytime on 31 May 1978, which is characterised by strong insolation, clear skies, moderately strong winds and weak advection. The local diffusion scheme uses an eddy diffusivity determined independently at each point along the vertical based on local vertical gradients of wind and virtual potential temperature, similar to the usual approach in atmospheric models. The nonlocal scheme determines an eddy diffusivity profile based on a diagnosed boundary-layer height and a turbulent velocity scale. It also incorporates nonlocal (vertical) transport effects for heat and moisture. The boundary-layer diffusion schemes are forced with the locally observed fluxes for heat and moisture. The outputs of the scheme are compared with the observed mean structure along the Cabauw tower, and the radiosonde profile at a nearby location (De Bilt). Overall, the nonlocal scheme transports moisture away from the surface more rapidly than the local scheme, and deposits the moisture at higher levels. The local scheme tends to saturate the lowest model levels unrealistically in comparison with the observations. We also compare the outputs of the two diffusion schemes with the results of a transilient model simulation. Subsequently, we study the impact on the model behaviour by varying important parameters in both diffusion schemes and we investigate the sensitivity to uncertainty in the environmental conditions. Finally, we study the interaction of the diffusion schemes with a simple surface flux scheme.     

The isotopic composition and elemental abundance of lutetium in meteorites and terrestrial samples and the 176Lu cosmochronometer

The isotopic composition of lutetium has been measured in a range of terrestrial and meteoritic materials using solid-source mass spectrometric techniques. The meteoritic and terrestrial isotopic abundances are identical within experimental errors. The absolute ¹⁷⁵Lu/¹⁷⁶Lu ratio as determined in this work is 37.36 ± 0.07 at the 95% confidence level. On the basis of this measurement the atomic weight of lutetium has been calculated to be 174.967 ± 0.002, which is in good agreement with the currently accepted figure of 174.97 ± 0.01.Using the stable isotope dilution technique the abundance of lutetium has been determined in 25 stone, 1 stony-iron and 8 iron meteorites, and in 12 standard rocks, with an accuracy of ±5% at the 95% confidence level. In general, there is good agreement between this work and other published data.The ¹⁷⁶Lu-¹⁷⁶Hf pair has been proposed as an s process nucleocosmochronometer, because of the long half-life of ¹⁷⁶Lu and the unique fact that both are s process isobars. The isotopic and elemental abundances of lutetium as measured in this work have been used with published nuclear data to estimate the mean age of s process nucleosynthesis for this isobaric pair, using the Schramm-Wasserburg formalism. The mean age cannot be accurately determined at the present time because of the lack of 30 keV neutron capture cross-section data for s only process nuclides and an accurate measurement of the branching ratio of ¹⁷⁵Lu + n. However, it is possible to place constraints on the nuclear parameters in this mass region using a reasonable s process chronology based on the decay of ¹⁷⁶Lu.     

Assessment of relative slope stability of Kodiak shelf,Alaska, using high‐resolution acoustic profiling data

Abstract

The use of marine high‐resolution geophysical profiling data, seafloor soil samples, and accepted land‐based methods of analysis have provided a means of assessing the regional geotechnical conditions and relative slope stability of the portion of the Gulf of Alaska Continental Margin known as the Kodiak Shelf. Eight distinct types of soils were recognized in the study; the seafloor distribution of these indicates a complex geotechnical setting. Each soil unit was interpreted as having a distinct suite of geotechnical properties and potential foundation engineering problems. Seven categories of relative slope stability were defined and mapped. These categories range from “highest stability”; to “lowest stability,”; and are based on the degree of slope of the seafloor, type of soil underlying the slope, and evidence of mass movement. The results of the analysis indicate that the highest potential for soil failure exists on (1) the slopes forming boundaries between the submarine banks and the broad sea valleys, and (2) the upper portion of the continental slope, where evidence of past slope failure is common. Also of concern are gently sloping areas near the edges of submarine banks where evidence of possible tension cracks and slow downhill creep was found.