Sedimentology and kinematics of a large, retrogressive growth-fault system in Upper Carboniferous deltaic sediments, western Ireland

Growth faulting is a common feature of many deltaic environments and is vital in determining local sediment dispersal and accumulation, and hence in controlling the resultant sedimentary facies distribution and architecture. Growth faults occur on a range of scales, from a few centimetres to hundreds of metres, with the largest growth faults frequently being under‐represented in outcrops that are often smaller than the scale of feature under investigation. This paper presents data from the exceptionally large outcrops of the Cliffs of Moher, western Ireland, where a growth‐fault complex affects strata up to 60 m in thickness and extends laterally for ≈ 3 km. Study of this Namurian (Upper Carboniferous) growth‐fault system enables the relationship between growth faulting and sedimentation to be detailed and permits reconstruction of the kinematic history of faulting. Growth faulting was initiated with the onset of sandstone deposition on a succession of silty mudstones that overlie a thin, marine shale. The decollement horizon developed at the top of the marine shale contact for the first nine faults, by which time aggradation in the hangingwall exceeded 60 m in thickness. After this time, failure planes developed at higher stratigraphic levels and were associated with smaller scale faults. The fault complex shows a dominantly landward retrogressive movement, in which only one fault was largely active at any one time. There is no evidence of compressional features at the base of the growth faults, thus suggesting open‐ended slides, and the faults display both disintegrative and non‐disintegrative structure. Thin‐bedded, distal mouth bar facies dominate the hangingwall stratigraphy and, in the final stages of growth‐fault movement, erosion of the crests of rollover structures resulted in the highest strata being restricted to the proximity of the fault. These upper erosion surfaces on the fault scarp developed erosive chutes that were cut parallel to flow and are downlapped by the distal hangingwall strata of younger growth faults.     

Trace element distributions in aquatic sediments of Danang – Hoian area, Vietnam

 Distribution of the trace elements Cr, Cu, Ni, Pb and Zn in surficial sediments of the river/sea environment in Danang – Hoian area (Vietnam) was investigated to examine the degree of metal pollution caused by anthropogenic activities. Point sources from domestic and industrial wastes are identified as dominant contributors of trace element accumulation. Surficial sediments of Hoian River show extremely high total concentrations of Cu (Average Concentration 295 μg/g), Ni (AC 112 μg/g), Pb (AC 396 μg/g) and Zn (AC 429 μg/g) that exceed assigned safety levels ER-M. Similarly, the sediments of Han River show high Pb (AC 188 μg/g) and Zn (AC 282 μg/g) contents. In marine sediments of Thanhbinh beach Pb is also enriched (138 μg/g) above guideline levels. In contrast the sediments of the Cude River are dominated by trace element concentrations close to background values. Received: 17 December 1998 · Accepted: 6 May 1999     

Effect of common point selection on coordinate transformation parameter determination

The use of satellite positioning techniques commonly requires a transformation from a Conventional Terrestrial coordinate system to a Geodetic coordinate system, or vice versa. For such a transformation, the main problem is the determination of transformation parameters between these coordinate systems. The transformation parameters are estimated by a least-squares process using “common” points, i.e., those points whose coordinates are known in both systems. Therefore, the precision of so estimated transformation parameters is closely related to certain characteristics of the common points. In this contribution, we have formulated some theoretical relations between the transformation parameters and the number and the distribution of common points, and corroborated the theoretical results numerically, using a simulated geodetic network.     

On the use of IPCC-class models to assess the impact of climate on Living Marine Resources

The study of climate impacts on Living Marine Resources (LMRs) has increased rapidly in recent years with the availability of climate model simulations contributed to the assessment reports of the Intergovernmental Panel on Climate Change (IPCC). Collaboration between climate and LMR scientists and shared understanding of critical challenges for such applications are essential for developing robust projections of climate impacts on LMRs. This paper assesses present approaches for generating projections of climate impacts on LMRs using IPCC-class climate models, recommends practices that should be followed for these applications, and identifies priority developments that could improve current projections. Understanding of the climate system and its representation within climate models has progressed to a point where many climate model outputs can now be used effectively to make LMR projections. However, uncertainty in climate model projections (particularly biases and inter-model spread at regional to local scales), coarse climate model resolution, and the uncertainty and potential complexity of the mechanisms underlying the response of LMRs to climate limit the robustness and precision of LMR projections. A variety of techniques including the analysis of multi-model ensembles, bias corrections, and statistical and dynamical downscaling can ameliorate some limitations, though the assumptions underlying these approaches and the sensitivity of results to their application must be assessed for each application. Developments in LMR science that could improve current projections of climate impacts on LMRs include improved understanding of the multi-scale mechanisms that link climate and LMRs and better representations of these mechanisms within more holistic LMR models. These developments require a strong baseline of field and laboratory observations including long time series and measurements over the broad range of spatial and temporal scales over which LMRs and climate interact. Priority developments for IPCC-class climate models include improved model accuracy (particularly at regional and local scales), inter-annual to decadal-scale predictions, and the continued development of earth system models capable of simulating the evolution of both the physical climate system and biosphere. Efforts to address these issues should occur in parallel and be informed by the continued application of existing climate and LMR models.     

Effective macroscopic transport parameters between parallel plates with constant concentration boundaries

A macroscopic transport model is developed, following the Taylor shear dispersion analysis procedure, for a 2D laminar shear flow between parallel plates possessing a constant specified concentration. This idealized geometry models flow with contaminant dissolution at pore-scale in a contaminant source zone and flow in a rock fracture with dissolving walls. We upscale a macroscopic transient transport model with effective transport coefficients of mean velocity, macroscopic dispersion, and first-order mass transfer rate. To validate the macroscopic model the mean concentration, covariance, and wall concentration gradient are compared to the results of numerical simulations of the advection–diffusion equation and the Graetz solution. Results indicate that in the presence of local-scale variations and constant concentration boundaries, the upscaled mean velocity and macrodispersion coefficient differ from those of the Taylor–Aris dispersion, and the mass transfer flux described by the first-order mass transfer model is larger than the diffusive mass flux from the constant wall. In addition, the upscaled first-order mass transfer coefficient in the macroscopic model depends only on the plate gap and diffusion coefficient. Therefore, the upscaled first-order mass transfer coefficient is independent of the mean velocity and travel distance, leading to a constant pore-scale Sherwood number of 12. By contrast, the effective Sherwood number determined by the diffusive mass flux is a function of the Peclet number for small Peclet number, and approaches a constant of 10.3 for large Peclet number.     

Stratigraphy, Chronology, and Paleoenvironmental Reconstruction of the Quaternary Sedimentary Infilling of a Volcanic Tube in Fuerteventura, Canary Islands

La Cueva del Llano is a volcanic tube of Pleistocene age on Fuerteventura Island, in the Canary Islands. Part of it is infilled with sediments of external origin. These deposits are exceptional in stratigraphic complexity and thickness compared with other known tube infillings, and they comprise nine stratigraphic units deposited in five phases. In Phase I, which has not been dated, sedimentation of cinder from a nearby cone occurred. Phase II began ca. 16,830 ± 900 ¹⁴C yr B.P., whereas phase IV dates to 9280 ± 370 ¹⁴C yr B.P. The interpretation of sedimentary features shows that phases III and V correspond to a dry climate, similar to the present one, whereas the climate was much wetter during phases II and IV. This paleoclimatic sequence agrees with those suggested by the study of deposits formed in other sedimentary environments, not only in Fuerteventura but on other islands of the Canary group and the Sud-Maroc region.     

Der Tagesgang von Temperatur und Luftfeuchtigkeit in San Salvador

Zusammenfassung Der Tagesgang von Temperatur und Luftfeuchtigkeit in San Salvador zeigt deutliche jahreszeitliche Verschiedenheiten, die wesentlich durch Strahlungsgenuss, Sonnenauf- und Untergangszeiten und ein tageszeitliches mittelräumiges Windsystem bestimmt ist.

---

Summary The daily variation of air temperature and humidity shows clear seasonal differences, which are essentially determined by incoming radiation, sunrise and sunset and a diurnal meso-scale wind system.

---

Resumen El transcurso diurno de la temperatura y de la humedad del ambiente en San Salvador demuestra netamente diferencias segun la estación del año, las cuales se deben a las condiciones de radiación, salida y puesta del sol y un sistema diurno de viento.

     

Towards medium-term (order of months) morphodynamic modelling of the Teign estuary, UK

The main objective of this paper is to address the principal mechanisms involved in the medium-term (order of months to years) morphodynamic evolution of estuaries through the application of a process-based numerical modelling. The Teign estuary (Teignmouth, UK) is the selected site. The system is forced by the macrotidal semi-diurnal tide in the English Channel and is perturbed to a minor extent by high river discharge events (freshets). Although waves have a definite influence on the adjacent coastal area, Wells (Teignmouth Quay Development Environmental Statement: Changes to Physical Processes. Report R.984c:140. ABP Marine Environmental Research Ltd., Southampton, 2002b) suggested that swell waves do not enter the estuary. Hence, wave effects are neglected in this study, as only tides and the river discharge are taken into account. The sediment grain size is highly variable, but mainly sandy. Within the frame of the COAST3D project (), four bathymetric surveys of the adjacent coastal area were carried out at a nearly weekly intervals. The outer estuary and the adjacent coastal area were also surveyed every 6 months as part of the COASTVIEW project (). Based on these data and on continuously measured parameters, such as water level, waves, wind and river discharge, numerical modelling of the morphodynamic processes can be tested. To replicate the morphological changes in the medium-term within a feasible simulation time, forcing conditions are reduced through the use of an input reduction method (called ensemble technique). In this study, simulations are based on the coupling between Telemac-2D and its non-cohesive sediment transport module, Sisyphe (version 5.3 for both modules). Three different sediment transport formulae were tested: (1) Engelund and Hansen (A monograph on sediment transport in alluvial streams, 3rd edn. Technological University of Denmark, Copenhagen, 1967) including the modifications proposed by Chollet and Cunge (J Hydraul Eng 17(1):1–13, 1979); (2) Bijker (Mechanics of sediment transport by the combination of waves and current. In: Design and reliability of coastal structures. 23rd international conference on Coastal Engineering, pp 147–173, 1968) and (3) Soulsby (Dynamics of Marine Sands. A manual for practical applications. HR Wallingford, Wallingford, p 142, 1997) modified version of van Rijn [J Hydraul Eng 110(10):1431–1456, 1984a, J Hydraul Eng 110(11):1613–1641, 1984b] formulation. Both a qualitative (i.e. visual comparison) and a quantitative tool [Brier Skill Score (BSS); described in Sutherland et al. in Coast Eng 51:917–939, 2004b] are applied to assess the similarity of simulations when compared to model predictions and observations. Tests confirmed the reliability and time efficiency of the ensemble technique, since it reproduced very well the results of a reference run, a computation based on the observed boundary conditions. For the spring-neap cycle modelled, the BSS was of 0.91 (a perfect modelling would have a BSS of 1), with a reduction in the simulation time on the order of 80%. For the 6-month-period simulation, results were also excellent: BSS=0.92 and a computer time reduction of 85%. In principle, this method has the advantage of being applied to any process-based numerical model.     

Exploring the orientations which characterise the likely public acceptance of low emission energy technologies

There is a large body of research and development into the low emission energy technologies that has the potential to assist developed and developing countries transition to more sustainable energy systems. It has long been recognised that public perceptions can have a fundamental effect on the market for technology and this issue raises questions about the role society will play in developing a low emissions energy future. Understanding how the public will respond to the range of low emission energy technologies as part of a climate change mitigation package is therefore critical for researchers, policy makers and industry stakeholders. In the current research, we investigated the Australian public’s likely acceptance of a range of low emission energy technologies by assessing the diverse ‘orientations’ that have emerged in response to low emission energy technologies. In a survey of two Australian states we measured the support for, and knowledge of, a range of low emission energy technologies. Using self-organising maps, a relatively new approach for segmenting response profiles, we identified that at least four distinct ‘orientations’ have emerged toward the issue and are characterising the likely acceptance of these technologies: ‘Disengaged’, ‘Nuclear Oriented’, ‘Renewables Oriented’, and ‘Engaged’. The implications of these multiple public viewpoints are described for climate change mitigation policy and for future research into the social acceptance of alternative energy technologies.     

Studies of temperature effects of dust storms

We studied the temperature variations of the lower air layer caused by dust content using a dust storm in Dushanbe in November 2007 as an example. Quantitative estimates of air cooling and a decrease in the diurnal temperature difference due to a diminishing horizontal visibility range are given. Observations of air temperature variations due to the dust content of the atmosphere in an arid zone are presented. The critical value of aerosol concentration for toggling between the greenhouse and antigreenhouse effects is determined. The long-term effect of dust aerosol on climate is analyzed.