Coronal environment of quiescent prominences

With thespectro-coronagraph and themultichannel subtractive double pass spectrograph (MSDP) at the Pic du Midi Observatory two quiescent prominences were observed simultaneously. From the spectro-coronagraph observations 2D maps of Hei 10830 , Fexiii 10798 and 10747 line intensities were obtained. In addition, we obtained 2D maps of the ratioR of the two iron lines. This ratio is used as a diagnostic for determining the density of the hot coronal plasma surrounding prominences. We found that the electron density is higher at the location of the prominences than in the corona, whereas small regions (40) of lower electron density are unevenly distributed around the prominences indicating that the surrounding corona is highly inhomogeneous. The density of the cavity is reduced by a factor 1.5 compared to the density of the prominence environment (5 × 10⁸ cm^–3). We discuss the existence of cavities around these prominences according to the orientation of their axes relative to the line of sight and according to the velocity field inside the prominences. Constraints on models for prominence formation are derived.     

Role of container vessels in the introduction of exotic species

Ballast water exchange practices were monitored on 28 incoming container vessels at the Port of Montreal. Measurements on 15 vessels indicated 13 of 32 tanks had salinities of <30 per thousand. The 16 transits with a North Atlantic route visited 31 of 37 ports located on freshwater or near freshwater outflows. Ballast carried by this vessel type represents an important means for the introduction of species on a global scale because of its transit routes, dockside discharge and moving ballast between tanks. Container vessels represent about 15% of the world fleet, but account for 32% of all visits to global ports, and 46% of visits to the 25 largest ports. The 10 ports that handled the largest volumes of international cargo also included 8 that handled the most cargo containers. Large ports can receive over 100,000 visits by all vessel types annually, and serve as hubs for over 500 ports in 100 countries. Secondary transport of exotic species is also a concern because of frequent visits by regional vessels.     

The solution of Kepler's equation,I

Methods of iteration are discussed in relation to Kepler's equation, and various initial guesses are considered, with possible strategies for choosing them. Several of these are compared; the method of iteration used in the comparisons has local convergence of the fourth order.WANG Laboratories, Inc.     

Possible meteoroid streams associated with (69230) Hermes and 2002 SY50

The orbits of (69230) Hermes and 2002 SY₅₀ are similar and the Earth approaches both of them twice: at the end of October the local orbital minimum distances are smaller than 0.007 AU, and at the end of April the distances are smaller than 0.04 AU. This gives us opportunities to observe the meteors associated with these asteroids. Using the geocentric parameters of the orbital close encounters (the theoretical radiants) and our D _N distance function (Valsecchi et al. Mon. Not. R. Astron. Soc. 304 (1999) 743), we searched for meteoroids originated by Hermes and 2002 SY₅₀. A search among 1830 good quality photographic meteors gave negative results: we found no meteor dynamically similar to Hermes or 2002 SY₅₀. In a second search, done in a set of 62150 radio meteors, we applied two methods (M1, M2) and in both cases we found two streams; the streams found with the M1 method had 43 and 30 members, those found with the M2 method had 39 and 14 members. However, these results do not look convincing, due to the small number of common members in the corresponding streams. We therefore conclude that amongst the IAU meteors used in our search there are no compact streams associated with Hermes and 2002 SY₅₀.     

Late Pleistocene talus flatiron formation below the Coal Cliffs cuesta,Utah, USA

Cuesta escarpment retreat is a principal mode of exhumation in regions of layered sedimentary rock. On the Colorado Plateau, this process acts as a mechanism for maintaining high‐relief topography and facilitating drainage divide migration. Quantitative estimates of cuesta evolution are difficult to evaluate over glacial‐interglacial timescales, and thus rates of geomorphic change along individual escarpments have mostly been constrained over millions of years. Several studies have addressed this problem by dating colluvium‐mantled talus flatirons. However, this technique has not been applied systematically on the Colorado Plateau. This study quantifies geomorphic change along a single Colorado Plateau cuesta using ³⁶Cl surface exposure dating. We present 33 ages from a single generation of talus flatirons below the Coal Cliffs of central Utah. Landscape evolution is further constrained using 14 ages from in‐situ bedrock, 3 ages from boulders on gully interfluves, and two ages from terrace alluvium. Results suggest a colluvial apron was deposited below the cuesta beginning as early as Marine Isotope Stage 3, and the latest depositional phase occurred near the Last Glacial Maximum. A switch from apron deposition to incision initiated flatiron formation sometime between 19.7 ± 2.5 and 11.8 ± 1.6 ka, broadly coincident with the transition from glacial to interglacial conditions. Our results have several important implications. Climatic changes during the end of the last glacial period appear to have shifted the balance between deposition and erosion below the Coal Cliffs, emptying the sediment reservoir at their base and increasing their height via bedrock incision. The climatic forcing could be imparted by several mechanisms, including local controls on debris generation / mobilization and base level changes exerted by transverse streams. Similar processes may have occurred during previous glacial‐interglacial transitions, implying that the escarpment retreat processes may be partially modulated by orbitally‐controlled variations in Earth's climate over larger timescales. Copyright © 2018 John Wiley & Sons, Ltd.     

Tectonic evolution of the ultrahigh-pressure (UHP) and high-pressure (HP) metamorphic belts from central China

Abstract In the Triassic suture between the Sino-Korean and Yangtze cratons, the Dabie metamorphic Complex in central China includes three tectonic units: the northern Dabie migmatitic terrane, the central ultrahigh-P coesite- and diamond-bearing eclogite belt, and the southern high-P blueschist-eclogite belt. This complex is bounded to the north by a north-dipping normal fault with a Paleozoic accretionary complex and to the south by a north-dipping reverse fault with Yangtze basement plus its foreland fold-and-thrust sequence. Great differences in metamorphic pressure suggests that these units reached different depths during metamorphism and their juxtaposition occurred by wedge extrusion of subducted old continental fragments. These units were subsequently subjected to (i) Barrovian type regional metamorphism and deformation at shallow depths; (ii) intrusion of Cretaceous granitic plutons; and (iii) doming and segmentation into several blocks by normal and strike-slip faults. A new speculative model of tectonic exhumation of UHP rocks is proposed.     

Numerical modelling of aeolian erosion over a surface with non‐uniformly distributed roughness elements

The present study is focused on the analysis of the mean wall friction velocity on a surface including roughness elements exposed to a turbulent boundary layer. These roughness elements represent non‐erodible particles over an erodible surface of an agglomeration of granular material on industrial sites. A first study has proposed a formulation that describes the evolution of the friction velocity as a function of geometrical parameters and cover rate with different uniform roughness distributions. The present simulations deal with non‐uniform distributions of particles with a random sampling of diameters, heights, positions and arrangements. The evolution (relative to geometrical parameters of the roughness elements) of the friction velocity for several non‐uniform distributions of roughness elements was analysed by the equation proposed in the literature and compared to the results obtained with the numerical simulations. This comparison showed very good agreement. Thus, the formulation developed for uniform particles was found also to be valid for a larger spectrum of particles noted on industrial sites. The present work aims also to investigate in detail the fluid mechanics over several roughness particles. Copyright © 2013 John Wiley & Sons, Ltd.     

Optimal design of passive energy dissipation systems based on H∞ and H2 performances

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.     

Paleoenvironmental reconstruction of Holocene coastal sediments adjacent to archaeological ruins in Aqaba,Jordan

Stratified cultural remains from the Early Roman/Nabataean to Byzantine periods in the coastal zone of Aqaba, Jordan, and analyses of thirteen sediment cores provide evidence for changes in the depositional environment during the Holocene. The overall trend in subsurface sediments is a basal marine transgressive layer overlain by a regressional sequence of embayment lagoonal sediments identified from microfossil analyses, and backshore pond, alluvium, and eolian deposits until the 1st century B.C., when mudbrick structures appear. Based on two radiocarbon dates, a brackish water coastal embayment formed prior to ca. 5900–5700 B.C. and was subsequently filled by siltation. Local tectonic subsidence along faults of the Dead Sea transform may have helped form the lagoon. Freshwater Candona sp. ostracods found in sand layers in the lagoon facies show signs of having been transported and redeposited. These data indicate that lakes or marshes were likely located inland of the study area. Supporting faunal and floral evidence for wetter climatic conditions, wetland habitats, and extensive water diversion and agricultural terraces has been excavated at late Chalcolithic (4000–3500 B.C.) sites in the Aqaba region (Khalil & Schmidt, 2009 ). By the 8th century B.C., the depositional environment along the coastal plain of Aqaba was dominated by distal alluvial fan and eolian sedimentation and the shoreline had prograded about 400m seaward. The migration of human settlements since the 8th century B.C. from the center of the valley toward the southeast may be driven by the changing course of Wadi Yutim and conditions along the coastal plain. © 2010 Wiley Periodicals, Inc.     

黄豆脲酶诱导碳酸钙沉淀多变量试验研究

植物源脲酶诱导碳酸钙沉淀（enzyme induced carbonate precipitation,简称EICP）可以显著改善砂土的工程力学特性,但在具体操作时,参数取值无对应规范,固化效果有待提升。基于黄豆脲酶,研究了温度、脲酶浓度、尿素浓度、钙浓度、pH值、钙源种类等变量对脲酶活性与碳酸钙沉淀的影响,并进行了沉淀物（碳酸钙晶体）的扫描式电子显微镜（scanning electron microscope,简称SEM）与X射线衍射（X-ray diffraction,简称XRD）测试,在此基础上开展了黄豆脲酶固化砂的无侧限抗压强度与固化效果试验研究。结果表明：脲酶活性随脲酶浓度的增加而线性增长,但存在温度阈值,温度超过阈值后,脲酶将完全失活,且阈值随脲酶浓度的增大而降低;尿素浓度与pH值共同影响脲酶活性,二者存在一个最优组合,当尿素浓度在0.1～1.0 mol/L时最优pH值为7,当尿素浓度在1.0～1.5 mol/L时最优pH值为8。脲酶是沉淀反应的催化剂,脲酶浓度越高,反应越完全,碳酸钙沉淀率越高;尿素与钙溶液则主要通过掺入量影响碳酸钙沉淀量,掺量比例宜为1:1,且二者浓度与pH值可通过影响脲酶活性来影响碳酸钙的沉淀情况;不同钙源对碳酸钙沉淀量的影响幅度不大。不同钙源沉淀碳酸钙晶体的成分与密度基本相同,但晶体结构差异较大,氯化钙沉淀碳酸钙晶体以块状为主,表面分布球状、类球状晶体,胶结面大,可作为EICP技术中较为理想的钙源。基于黄豆脲酶和氯化钙钙源固化砂的无侧限抗压强度约为掺粉煤灰砂样的6倍,通过SEM图像可发现,沉淀碳酸钙晶体包裹并黏结砂粒成为整体,固化效果非常理想。