Na-rich carbonate inclusions in perovskite and calzirtite from the Guli intrusive Ca-carbonatite,polar Siberia

Carbonate phases, some rich in Na₂O and comparatively rich in SrO and BaO, occur as inclusions in perovskite and calzirtite (Ca₂Zr₅Ti₂O₁₆) in the carbonatite of the Guli complex, Siberia. This is the first record of alkali carbonates, akin to nyerereite [Na₂Ca(CO₃)₂], in plutonic igneous rocks. The inclusion populations suggest that the parental magma of the complex was Ca-rich but developed Na-rich differentiates during the latest stages. This points to the dominant calcic carbonatites of the complex not being derivatives of alkali-rich parental carbonatites. These alkali-rich carbonate inclusions (and rare inclusions of djerfisherite) have been preserved due to the resistance of perovskite and calzirtite to processes of leaching, hydrothermal alteration and weathering.     

High pressure experimental calibration of the olivine-orthopyroxene-spinel oxygen geobarometer: implications for the oxidation state of the upper mantle

Synthetic spinel harzburgite and lherzolite assemblages were equilibrated between 1040 and 1300° C and 0.3 to 2.7 GPa, under controlled oxygen fugacity (f _{O 2}). f _{O 2} was buffered with conventional and open double-capsule techniques, using the Fe−FeO, WC-WO₂-C, Ni−NiO, and Fe₃O₄−Fe₂O₃ buffers, and graphite, olivine, and PdAg alloys as sample containers. Experiments were carried out in a piston-cylinder apparatus under fluid-excess conditions. Within the P-T-X range of the experiments, the redox ratio Fe³⁺/ΣFe in spinel is a linear function of f _{O 2} (0.02 at IW, 0.1 at WCO, 0.25 at NNO, and 0.75 at MH). It is independent of temperature at given Δlog(f _{O 2}), but decreases slightly with increasing Cr content in spinel. The Fe³⁺/ΣFe ratio falls with increasing pressure at given Δlog(f _{O 2}), consistent with a pressure correction based on partial molar volume data. At a specific temperature, degree of melting and bulk composition, the Cr/(Cr+Al) ratio of a spinel rises with increasing f _{O 2}. A linear least-squares fit to the experimental data gives the semi-empirical oxygen barometer in terms of divergence from the fayalite-magnetite-quartz (FMQ) buffer:

An Example of Island-Arc Petrogenesis: Geochemistry and Petrology of the Southern Luzon Arc, Philippines

Volcanism throughout the Luzon arc is associated with eastwardsubduction of the South China Sea floor along the Manila Trench.The southern section of the arc, the focus of this study, extendsfrom the Lingayen-Dingalan fault to the small islands just southof Luzon. Two segments appear to exist along this section ofthe arc the northern Bataan and southern Mindoro segments whichare separated by the Macolod Corridor. The volcanic rocks have typical arc phenocryst mineralogies:olivine, clinopyroxene, plagioclase, and titanomagnetite inthe most mafic rocks and clinopyroxene, plagioclase, orthopyroxene,titanomagnetite, ? amphibole in the more felsic samples. Complexzoning, sieve textures, and decoupling of incompatible traceelements suggest that processes such as assimilation have takenplace. The rocks from the study area range from basalts to rhyolitesand show typical calc-alkaline features. The rocks of the MacolodCorridor and Mindoro segment are particularly enriched in largeion lithophile elements (LILE), light rare earth elements (LREE),and radiogenic Sr compared with the Bataan segment. The datafall within the mantle array on Sr-Nd isotopic diagrams andgrade toward higher Sr and lower Nd isotopic values from northto south. A likely source for the volcanics of this study is either amid-ocean ridge basalt (MORB)-type mantle that undergoes higherdegrees of partial melting than regions involved in MORB generationor a previously depleted source. We suggest that the high fieldstrength element (HFSE) anomalies have been derived throughdifferential element partitioning during fluid transport fromthe subducted lithosphere to the mantle wedge. Continental crustal material seems to play a significant roleparticularly in the Macolod Corridor and the Mindoro segment,based on the high LILE, La/Sm ratios, radiogenic Sr isotopes,and ¹⁸O values. The Macolod Corridor and the Mindoro segmenthave undergone source contamination by crustal material fromthe North Palawan-Mindoro crustal block either during the collisionof this block with the Manila Trench or by subduction of sedimentsrich in this crustal material. A similar component has alsobeen detected in the Bataan segment but in minor amounts. Thetrace element and isotopic differences between the northernand southern sections of the arc are interpreted in terms ofvariable composition (i. e., variable amounts of a crustal componentintroduced from the Palawan-Mindoro crustal terrain) of themetasomatic fluids released into the source.     

Geochemical specialization of the tin-bearing granitoid massifs of NW Bohemia

The geochemistry of Hercynian tin-bearing granitoid massifs of the Krune hory Mts. (Erzgebirge), Slavkovský les Forest (Kaiserwald) and Smriny (eastern Fichtelgebirge) is compared by statistical processing of 270 analyses including a wide spectrum of major and trace elements. Seven different types of granites are distinguished. Out of these, five types represent the successive differentiation of the largest massif of NW Bohemia: the Karlovy Vary (Karlsbad) massif. This comprises strongly differentiated peraluminous granites evolving towards extreme Li-Rb-Cs-F-and Sn-enrichment in the youngest members, which are albite-topaz-zinwaldite lithium granites. The sixth and seventh types are different from the former by their location in the eastern Krune hory and tectonic setting, and they display geochemical features of anorogenic granites: they are metaluminous albite-zinwaldite granites with marked enrichment of Nb, Y, and HREE in addition to Li, Rb, Cs, F and Sn, indicating contamination by sub-crustal material. Sn-W mineralizations, including flat peri-contact greisen bodies, steep greisen veins and tourmalinized phyllites, are all intimately associated with the most strongly differentiated granites — the Li-granite and the Cinovec-granite respectively.     

On the practice of estimating fractal dimension

Coastlines epitomize deterministic fractals and fractal (Hausdorff-Besicovitch) dimensions; a divider [compass] method can be used to calculate fractal dimensions for these features. Noise models are used to develop another notion of fractals, a stochastic one. Spectral and variogram methods are used to estimate fractal dimensions for stochastic fractals. When estimating fractal dimension, the objective of the analysis must be consistent with the method chosen for fractal dimension calculation. Spectal and variogram methods yield fractal dimensions which indicate the similarity of the feature under study to noise (e.g., Brownian noise). A divider measurement method yields a fractal dimension which is a measure of complexity of shape.     

The effect of bulk rock composition on the stability of amphibole in the upper mantle: Implications for solidus positions and mantle metasomatism

Summary The stability of pargasitic amphibole in the upper mantle is a function of water content and bulk rock composition, and under water-undersaturated conditions, the stability of amphibole controls the solidus position. Experiments in the system Tinaquillo peridotite +0.2% H₂O, a refractory peridotite under water-undersaturated conditions, show that amphibole is stable to 1030°C and 26 kb. In contrast, pargasitic amphibole is stable to 1150°C and 30 kb in Hawaiian pyrolite, a more fertile peridotite composition. This indicates that under water-undersaturated conditions, the most fertile part of a crystallizing mantle diapir with an inhomogeneous composition will solidify first while a more refractory component will contain an alkali-rich melt which will have the ability to metasomatize adjacent regions. The relative stabilities of amphibole in refractory and fertile bulk compositions may result in increasing rather than diminishing chemical contrasts in high temperature lherzolite, i.e. a process of metamorphic differentiation. Ti, Fe, Al and Na metasomatism can therefore be considered a normal occurrence associated with the upward migration and solidification of an H₂O-bearing mantle diapir.

---

Der Einfluß der Gesamtgesteins-Zusammensetzung auf die Stabilität von Amphibol im oberen Mantel: Bedeutung für Solidus-Positionen und Mantel-Metasomatose

Zusammenfassung Die Stabilität pargasitischer Amphibole im oberen Mantel ist eine Funktion von Wassergehalt und Gesamtgesteins-Zusammensetzung. Unter wasser-untersättigten Bedingungen, kontrolliert die Stabilität von Amphibol die Solidus-Position. Experimente in dem System Tinaquillo Peridotit +0,2% H₂O, einem refraktären Peridotit unter wasser-untersättigten Bedingungen, zeigen daß Amphibol bis 1030°C und 26 Kb stabil ist. Im Gegensatz dazu ist pargasitische Hornblende in einem Hawaii-Pyrolit, von mehr fertiler Peridotit-Zuammensetzung, bis 1150°C und 30 Kb stabil. Das zeigt, daß bei wasser-untersättigten Bedingungen der am meisten produktive Teil eines kristallisierenden Mantel-Diapirs mit inhomogener Zusammensetzung sich zuerst verfestigen wird, während eine mehr refraktäre Komponente eine alkali-reiche Schmelze enthalten wird, die wiederum die Fähigkeit hat, umliegende Bereiche metasomatisch zu beeinflussen. Die relativen Stabilitäten von Amphibol in refraktären und fertilen Gesamtzusammensetzungen können dazu führen, daß die chemischen Gegensätze in Hochtemperaturlherzoliten eher zunehmen als abnehmen, d. h. ein Prozeß metamorpher Differentiation. Ti, Fe, Al und Na Metasomatose können deshalb als ein verbreiteter Vorgang, der mit der Aufwärtsbewegung und Verfestigung eines H₂O-führenden Mantel-Diapirs assoziiert ist, betrachtet werden.

---

---

With 4 Figures     

Commission health and development

IGU-Reports

Commission health and development     

Littoral '92

Reports

Littoral '92     

An internal variable model for the creep of rocksalt

Summary The creep strain rate of rocksalt, like that of other ductile crystalline materials, can be described by a power law equation of the type ( ) ⁿ , where the active stress is the difference between the total deviatoric applied stress and an internal stress _i . In this paper, the origin and the nature of this internal stress, which develops during inelastic deformation of the material, are discussed. It is shown that this internal stress can serve as an internal (or state) variable in the constitutive model of rocksalt, which reflects the microstructure evolution of the material under the competitive action of hardening and recovery mechanisms.An analysis of experimental data, both our own and those taken from the literature, demonstrates that such a law is able to correctly reproduce rocksalt creep test results in the steady-state domain. The proposed model is in accordance with the macroscopic and microscopic behavior of salt, and with direct measurements of the internal stresses made by others on this material.