Fracture Length Estimation from Borehole Image Logs

We describe a method to estimate fracture length for circular fractures from borehole image logs. The relative frequency of fractures, which have complete circumference trace on image logs is related to fracture length. A simple functional relationship can be derived for the relative frequency of complete fracture traces in terms of average fracture inclination to borehole, borehole diameter and fracture length. This formulation however, tends to underestimate fracture length because a constant length is assumed. A more accurate length estimate can be obtained by assuming that fracture length is linearly correlated to fracture aperture or spacing. Cumulative frequency distribution of fracture aperture and spacing can be obtained from borehole image logs. The problem then transforms itself to finding the scaling factor between fracture length and aperture (or spacing) from the relative frequency of fractures with complete traces. The product of the scaling factor and average fracture spacing (or aperture) gives the average fracture length.     

The effect of decomposition of hydrous minerals on the mechanical properties of rocks at high pressures and temperatures

Extensive experiments have been carried out in which specimens of gypsum, a partially serpentinized peridotite, a serpentinite and a chloritite have been subjected to pressures up to 0.662 GPa together with temperatures up to 780°C and have been deformed at a fixed strain rate of 10⁻⁵/s. The commencement of decomposition of the hydrous minerals is accompanied in sealed specimens by loss of strength, a reduction in sliding friction, and embrittlement of the rocks. Dilatancy-hardening effects are observed. Specimens which are drained to the atmosphere remain strong. In gypsum there is a ten-fold reduction in strength between temperatures of 50°C and 150°C. The partially serpentinized peridotite (40% forsterite, 60% antigorite) which contains 1% of brucite shows a reduction in strength 50% at 300°C, followed by a further ten-fold reduction between 300°C and 700°C. The serpentinite (90% lizardite and chrysotile) shows a ten-fold reduction in strength between 400°C and 600°C. The chloritite (85% ripidolite) shows a reduction of strength by about a half at 300°C; the strength remains approximately constant between 300°C and 600°C, and there is a further five-fold reduction in strength between 600°C and 700°C. The phase changes in the hydrous minerals have been studied by means of differential thermal analysis, X-ray diffraction and optical microscopy, and will be more fully described elsewhere. A detailed discussion is given of the deformation characteristics and mechanisms, with particular emphasis on the role of pore pressure and dilatancy. There is a range of temperature for each of these rocks in which the deformation of sealed samples is most stable, in the sense that brittle faulting accompanied by a stress-drop does not occur. At higher temperatures the rocks become unstable and very weak. Under conditions corresponding to geothermal gradients between 5 K km⁻¹ and 100 K km⁻¹ these rocks would be brittle and weak at shallow depths, and would again become brittle and weak at depths below some level which depends on the rock. Possible implications are discussed in connection with faulting and earthquakes, with syntectonic metamorphism, and with the emplacement of Alpine-type peridotites.     

Evaluation of burial history, thermal maturity and source-rock assessment of the Upper Paleozoic succession of the eastern Taurus region, southern Turkey

The regional burial history pattern, thermal maturity variations and source rock assessment of the sedimentary succession in the eastern Taurus region, in the southern part of Turkey, have been studied on surface samples collected from the six different sections which represent the entire region. Organic petrography (Thermal Alteration Index) and geochemical data (TOC content, T_max and HI values) were obtained from transmitted-light microscopy and Rock-Eval pyrolysis.The Lower Paleozoic (Cambrian, Ordovician and Silurian) strata were not investigated and modeled in terms of the maturity and hydrocarbon source rock potential, because of their poor organic matter content and their over maturity resulting from great burial depth (more than 7630 m). Other Paleozoic strata, except the Lower Devonian Ayitepesi Formation, generally have the values of more than 0.5% TOC. Organic matter of the Middle Devonian Safaktepesi sediments are composed of highly terrestrial organic material (type III kerogen), while samples from other three formations (Gumusali, Ziyarettepe and Yigilitepe Formations), while samples from other organic matter (type II and type III kerogen). The average TAI values are as high as 3.4 (equivalent to 1.42 of R₀%) for Ayitepesi and as low as 2.75 (equivalent to 0.77 of R₀%) for Yigilitepe Formations. Time-temperature index values (TTI) indicate that Ziyarettepe and Yigilitepe sediments are marginally mature to mature, while the Devonian strata are overmature. There are minor discrepancies between ΣTTI values and geochemical data in terms of the organic maturity for Devonian strata. In contrast, the e is a consistency between those values for the Ziyarettepe and the Yigilitepe Formations. The onset of oil generation time in the region was initiated from as early as the Norian (216 Ma) to as late as the Lutetian (45 Ma).Regional variations in the level of thermal and source-rock maturities of the Upper Paleozoic sediments in the eastern Taurus region largely depend on burial depth.     

Buoyancy‐driven deformation and contemporary tectonic stress in the lithosphere beneath Central Italy

We studied the continental deformation and modelled the contemporary flow and stress distribution in the lithosphere beneath Central Italy. We made use of a revisited crust and uppermost mantle Earth structure that supports delamination processes. The model behaviour is primarily determined by the thick high density lithospheric root to the east and the low‐viscosity shallow mantle wedge to the west. The rate of the modeled crustal motion is in agreement with GPS data and the pattern of lithospheric flow explains the heat flux, the regional geology and provides a new background for the genesis and age of the recent Tuscan magmatism. The modelled stress in the lithosphere is spatially correlated with the prevailing stress field and the gravitational potential energy patterns and shows that buoyancy forces, solely, can explain the coexisting regional contraction and extension and the unusual sub‐crustal seismicity.     

Vertical distribution and source identification of polycyclic aromatic hydrocarbons in anoxic sediment cores of Chini Lake, Malaysia: Perylene as indicator of land plant-derived hydrocarbons

Four anoxic sediment cores were collected from Chini Lake, Malaysia in order to investigate the variability of polycyclic aromatic hydrocarbon (PAH) and perylene concentrations. The study also determined significant differences of perylene concentrations in different sediment layers. Total PAH concentrations ranged from 248 to 8098 ng g⁻¹ in the samples. Diagnostic PAH ratios such as methylphenanthrenes/phenanthrene (MP/P), phenanthrene/anthracene (P/A) and fluoranthene/(fluoranthene + pyrene) (Fl/(Fl + Py) revealed a dominance of pyrogenic influences and partial petrogenic inputs to the top sediment layers. Perylene concentrations were high in the top layers (<12 cm) and increased with increasing depth. There is a significant positive correlation (r = 0.705, p = 0.01) between perylene concentrations and TOC. Analysis of variance (ANOVA) and LSD revealed significant differences (p < 0.05) in TOC-normalized perylene concentrations between the upper (<12 cm) and bottom layers (>12 cm). The average perylene concentrations accounted for 26–50% (0–12 cm) and 50–77% (12–36 cm) of pentacyclic-aromatic hydrocarbon isomers (PAI) present whereas it made up 10–34% (0–12 cm) and 46–66% (12–36 cm) of the total PAH. The average pyrene concentrations decreased with increasing depth and accounted for 62% (0–3 cm), 20–23% (3–12 cm) and 3–1.4% (12–36 cm) of perylene present. The results of hierarchical cluster analysis based on these ratios suggested different input sources for the top and bottom layers. It is concluded that the activity of termites on woody plants produced perylene which is supplied to the lake by run-off from the heavy and frequent rains in this Asian tropical climate. In addition, there was also in situ formation of perylene in the bottom layers due to diagenetic processes.     

Geochemistry of subsurface Late Quaternary ironstones in Rajshahi and Bogra Districts,Bangladesh: implications for genetic and depositional conditions

The present study deals with the geochemistry of Late Quaternary ironstones in the subsurface in Rajshahi and Bogra districts, Bangladesh with the lithological study of the boreholes sediments. Major lithofacies of the studied boreholes are clay, silty clay, sandy clay, fine to coarse grained sand, gravels and sands with (fragmentary) ironstones. The ironstones contain major oxides, Fe₂O₃* (* total Fe) (avg. 66.6 wt%), SiO₂ (avg. 15.3 wt%), Al₂O₃ (avg. 4.0 wt%), MnO (avg. 7.7 wt%), and CaO (avg. 3.4 wt%). These geochemical data imply that the higher percentage of Fe₂O₃* along with Al₂O₃ and MnO indicate the ironstone as goethite and siderite, which is also validated by XRD data. A comparatively higher percentage of SiO₂ indicates the presence of relative amounts of clastic quartz and manganese-rich silicate or clay in these rocks. These ironstones also have significant amounts of MnO (avg. 7.7 wt%) suggesting their depositional environments under oxygenated condition. Chemical data of these ironstones suggest that the source rock suffered deep chemical weathering and iron was mostly carried in association with the clay fraction and organic matter. Iron concretion was mostly formed by bacterial build up in swamps and marshes, and was subsequently embedded in clayey mud. Within the coastal environments, the water table fluctuates and goethite and siderite with mud and quartz became dry and compacted to form ironstone.

     

Correction to: Estimation of static earth pressures for a sloping cohesive backfill using extended Rankine theory with a composite log-spiral failure surface

Acta Geotechnica - In the original publication of the article, the left-hand side of Eq. (8) had been mistakenly changed.     

Flow-plant interactions at a leaf scale: effects of leaf shape, serration, roughness and flexural rigidity

The effects of leaf shape, serration, roughness and flexural rigidity on drag force imposed by flowing water and its time variability were experimentally studied in an open-channel flume at seven leaf Reynolds numbers ranging from 5 to 35 × 10³. The study involved artificial leaves of the same surface area but with three shapes (‘elliptic’, ‘rectangular’ and ‘pinnate’), three flexural rigidities, smooth-edge and sawtooth-like serration, and three combinations of surface roughness (two-side rough, one-side rough/one-side smooth, and two-side smooth). Shape was the most important factor determining flow-leaf interactions, with flexural rigidity, serration and surface roughness affecting the magnitude but not the direction of the effect on drag control. The smooth-edge elliptic leaf had a better hydrodynamic shape as it experienced less drag force, with the rectangular leaf showing slightly less efficiency. The pinnate leaf experienced higher drag force than the other leaves due to its complex geometry. It is likely that flow separation from 12 leaflets of the pinnate leaf prevented leaf reconfiguration such as leaflets folding and/or streamlining. Flexural rigidity strongly influenced the leaf reconfiguration and augmented the serration effect since very rigid leaves showed a strong effect of serration. Furthermore, serration changed the turbulence pattern around the leaves by increasing the turbulence intensity. Surface roughness was observed to enhance the drag force acting on the leaf at high Reynolds numbers. The results also suggest that there are two distinctly different flow-leaf interaction regimes: (I) regime of passive interaction at low turbulence levels when the drag statistics are completely controlled by the turbulence statistics, and (II) regime of active interaction at high turbulence levels when the effect of leaf properties on the drag statistics becomes comparable to the turbulence contribution.     

Adaptive Blending of Model and Observations for Automated Short-Range Forecasting: Examples from the Vancouver 2010 Olympic and Paralympic Winter Games

An automated short-range forecasting system, adaptive blending of observations and model (ABOM), was tested in real time during the 2010 Vancouver Olympic and Paralympic Winter Games in British Columbia. Data at 1-min time resolution were available from a newly established, dense network of surface observation stations. Climatological data were not available at these new stations. This, combined with output from new high-resolution numerical models, provided a unique and exciting setting to test nowcasting systems in mountainous terrain during winter weather conditions. The ABOM method blends extrapolations in time of recent local observations with numerical weather predictions (NWP) model predictions to generate short-range point forecasts of surface variables out to 6 h. The relative weights of the model forecast and the observation extrapolation are based on performance over recent history. The average performance of ABOM nowcasts during February and March 2010 was evaluated using standard scores and thresholds important for Olympic events. Significant improvements over the model forecasts alone were obtained for continuous variables such as temperature, relative humidity and wind speed. The small improvements to forecasts of variables such as visibility and ceiling, subject to discontinuous changes, are attributed to the persistence component of ABOM.