An insight into the formation of severe ozone episodes: modeling the 21/03/01 event in the ESCOMPTE region

High ozone concentrations are observed more and more frequently in the lower troposphere. The development of such polluted episodes is linked to a complex set of chemical, physical and dynamical parameters that interact with each other. To improve air quality, it is necessary to understand and quantify the role of all these processes on the intensity of ozone formation. The ESCOMPTE program, especially dedicated to the numerical simulation of photochemical episodes, offers an ideal frame to investigate details of the roles of many of these processes through 3D modeling. This paper presents the analysis, with a 3D eulerian model, of a severe and local episode of ozone pollution that occurred on the 21st of March 2001 in the ESCOMPTE region. This episode is particularly interesting due to the intensity of the observed ozone peaks (450 μg/m³ during 15 mn) but also because it did not occur in summer but at the beginning of spring. As part of the premodeling work of the ESCOMPTE program, this study focuses on the sensitivity of the simulated ozone peaks to various chemical and physical phenomena (long-range transport, industrial emissions, local dynamic phenomena…) to determine their influence on the rise of high local photooxidant concentrations and to better picture the photochemistry of the ESCOMPTE region. Through sensitivity tests to dynamical calculation resolution and emissions, this paper shows how the combination of sea and pond breezes with emissions of reactive VOCs can generate local intense ozone peaks.     

Asian dustfall in the St. Elias Mountains, Yukon, Canada

In April 2001, a major atmospheric dustfall event occurred in the St. Elias Mountains, Yukon Territory, Canada. Field samples were collected and analyzed for particle size, mineralogy, chemical composition and Sr, Nd and Pb isotopes. Dusts found above ∼3000 m had their source in the Gobi desert region of northern China and Inner Mongolia, and were transported to the Yukon following a series of major dust storms that took place in early April. Dusts found below 3000 m had local (Yukon) or mixed source(s). The Asian dusts had a modal volume diameter of ∼4 μm typical of far-traveled mineral aerosols. However larger (>10 μm) particles were also found at ∼5000 m, suggesting a very rapid trans-Pacific transport in the mid-troposphere. We estimate that the April 2001 event deposited from 5500 to 6335 tons of dust over an area of 21,000 km² in the southwestern Yukon, most of which probably fell within a week. Our findings are consistent with instrumental observations and model simulations of the April 2001 event. While the dust cloud was reportedly mixed with volatile pollutants from Asia, we found no evidence of metal pollution associated with the dustfall in the Yukon. Our findings contribute to clarify the dynamics and the geochemical impact of Asian dust long-range transport events, and to better estimate eolian fluxes of dustborne elements (e.g., Fe) to the Ocean associated with such events. They may also assist in identifying past Asian dust events in ice cores drilled from the St. Elias Mountains icefields, to develop a long-term record of their frequency, magnitude and source(s).     

Si stable isotopes in the Earth's surface: A review

Silicon (Si) is the second most abundant element on Earth after oxygen. Only few studies have attempted to use stable isotopes of Si as proxies for understanding the Si cycle and its variations in the past. By using three different methods (IRMS, MC–ICP–MS and SIMS), the overall measurements show that the isotopic composition (δ³⁰Si) of terrestrial samples ranges from − 5.7‰ to + 3.4‰. Dissolved Si in rivers and seawater is ³⁰Si-enriched (− 0.8‰ < δ³⁰Si < + 3.4‰) compared to Si in endogeneous rocks (− 1.1‰ < δ³⁰Si < + 0.7‰). This global enrichment is counterbalanced by the Si-bearing phases (biogenic silica, clays, quartz) where Si is, in average, ³⁰Si-depleted (− 5.7‰ < δ³⁰Si < + 2.6‰). These values are the result of fractionation which have been measured or estimated from − 0.3‰ to − 3.8‰. The fractionation is modeled by two types of approaches: the Rayleigh distillation model (closed system) and the steady-state model (open system). These models have been used in the most recent studies to explain the observed δ³⁰Si variations in continental environments and in the sub-Antarctic Ocean.     

Propagation of orographic barriers along an active range front: insights from sandstone petrography and detrital apatite fission-track thermochronology in the intramontane Angastaco basin, NW Argentina

The arid Puna plateau of the southern Central Andes is characterized by Cenozoic distributed shortening forming intramontane basins that are disconnected from the humid foreland because of the defeat of orogen‐traversing channels. Thick Tertiary and Quaternary sedimentary fills in Puna basins have reduced topographic contrasts between the compressional basins and ranges, leading to a typical low‐relief plateau morphology. Structurally identical basins that are still externally drained straddle the eastern border of the Puna and document the eastward propagation of orographic barriers and ensuing aridification. One of them, the Angastaco basin, is transitional between the highly compartmentalized Puna highlands and the undeformed Andean foreland. Sandstone petrography, structural and stratigraphic analysis, combined with detrital apatite fission‐track thermochronology from a ～6200‐m‐thick Miocene to Pliocene stratigraphic section in the Angastaco basin, document the late Eocene to late Pliocene exhumation history of source regions along the eastern border of the Puna (Eastern Cordillera (EC)) as well as the construction of orographic barriers along the southeastern flank of the Central Andes. Onset of exhumation of a source in the EC in late Eocene time as well as a rapid exhumation of the Sierra de Luracatao (in the EC) at about 20 Ma are recorded in the detrital sediments of the Angastaco basin. Sediment accumulation in the basin began ～15 Ma, a time at which the EC had already built sufficient topography to prevent Puna sourced detritus from reaching the basin. After ～13 Ma, shortening shifted eastward, exhuming ranges that preserve an apatite fission‐track partial annealing zone recording cooling during the late Cretaceous rifting event. Facies changes and fossil content suggest that after 9 Ma, the EC constituted an effective orographic barrier that prevented moisture penetration into the plateau. Between 3.4 and 2.4 Ma, another orographic barrier was uplifted to the east, leading to further aridification and pronounced precipitation gradients along the mountain front. This study emphasizes the important role of tectonics in the evolution of climate in this part of the Andes.     

Detecting communities with the multi-scale Louvain method: robustness test on the metropolitan area of Brussels

Detecting communities in large networks has become a common practice in socio-spatial analyses and has led to the development of numerous dedicated mathematical algorithms. Nowadays, however, researchers face a deluge of data and algorithms, and great care must be taken regarding methodological questions such as the values of the parameters and the geographical characteristics of the data. We aim here at testing the sensitivity of multi-scale modularity optimized by the Louvain method to the value of the resolution parameter (introduced by Reichardt and Bornholdt (Phys Rev Lett 93(21):218701, 2004.  https://doi.org/10.1103/PhysRevLett.93.218701) and controlling the size of the communities) and to a number of spatial issues such as the inclusion of internal loops and the delineation of the study area. We compare the community structures with those found by another well-known community detection algorithm (Infomap), and we further interpret the final results in terms of urban geography. Sensitivity analyses are conducted for commuting movements in and around Brussels. Results reveal slight effects of spatial issues (inclusion of the internal loops, definition of the study area) on the partition into job basins, while the resolution parameter plays a major role in the final results and their interpretation in terms of urban geography. Community detection methods seem to reveal a surprisingly strong spatial effect of commuting patterns: Similar partitions are obtained with different methods. This paper highlights the advantages and sensitivities of the multi-scale Louvain method and more particularly of defining communities of places. Despite these sensitivities, the method proves to be a valuable tool for geographers and planners.     

Reliable Determination of Ge in Solid Environmental Samples Using a Chemical Preparation Procedure Developed for Si Isotopes and ICP‐MS Analysis

Germanium (Ge) exists at trace levels in the Earth's crust and is a powerful geochemical tracer of the silicon (Si) cycle. This study proposes a simple and reliable method for determining Ge contents in environmental samples using ICP‐MS. As Si and Ge have very similar chemical properties, we investigated the applicability of the chemical preparation procedure developed for Si isotopes for the determination of Ge in environmental samples. Advantages of this procedure are as follows: (a) efficient removal of the matrix and main interferences affecting Ge determinations by ICP‐MS, (b) a low limit of detection (6 ng l^?1), (c) relative repeatability of approximately 3% obtained on ⁷⁴Ge and (d) robustness and accuracy based on agreement within errors with the published Ge values for rock reference materials (BHVO‐2, AGV‐2 and BCR‐2). This procedure allowed revision of the Ge values of three soil reference materials (1.67 ± 0.09 μg g^?1, 2.41 ± 0.18 μg g^?1, 1.89 ± 0.10 μg g^?1 for GBW 07401, GBW 07404 and GBW 07407, respectively) and proposal of a value for the plant reference material ERM‐CD281 (70 ± 3 μg g^?1). This method provides a convenient procedure for determining Ge mass fractions in environmental samples and opens the possibility of coupling two tracers of the Si biogeochemical cycle with a single measurement procedure.     

Acoustic monitoring of gas emissions from the seafloor. Part I: quantifying the volumetric flow of bubbles

Three decades of continuous ocean exploration have led us to identify subsurface fluid related processes as a key phenomenon in marine earth science research. The number of seep areas located on the seafloor has been constantly increasing with the use of multi-scale imagery techniques. Due to recent advances in transducer technology and computer processing, multibeam echosounders are now commonly used to detect submarine gas seeps escaping from the seafloor into the water column. A growing number of en-route surveys shows that sites of gas emissions escaping from the seafloor are much more numerous than previously thought. Estimating the temporal variability of the gas flow rate and volumes escaping from the seafloor has thus become a challenge of relevant interest which could be addressed by sea-floor continuous acoustic monitoring. Here, we investigate the feasibility of estimating the volumetric flow rates of gas emissions from horizontal backscattered acoustic signals. Different models based on the acoustic backscattering theory of bubbles are presented. The forward volume backscattering strength and the inversion volumetric flow rate solutions were validated with acoustic measurements from artificial gas flow rates generated in controlled sea-water tank experiments. A sensitivity analysis was carried out to investigate the behavior of the 120-kHz forward solution with respect to model input parameters (horizontal distance between transducer and bubble stream, bubble size distribution and ascent rate). The most sensitive parameter was found to be the distance of the bubble stream which can affect the volume backscattering strength by 20 dB within the horizontal range of 0–200 m. Results were used to derive the detection probability of a bubble stream for a given volume backscattering strength threshold according to different bubble flow rates and horizontal distance.