Sediments Quality Assessment of Jacarepaguá Lagoon: The Venue of the 2011 Rock in Rio

In order to aid in the efforts of the 2016 Olympic Games, the organizers of 2011 Rock in Rio decided to build a permanent venue next to the Olympic Park. The area is problematic from the geotechnical point of view since it presents soils with low shear strength, low permeability, and high plasticity, so major soil improvement works were carried out. Bored soil–cement columns were placed to increase soil shear strength and reduce compressibility. A meter thick fill composed of gneiss residual soil was placed and trenches were digged to drain rainwater. However, earlier studies conducted on Jacarepaguá Lagoon have detected the presence of heavy metals in these sediments. In this study, an environmental survey on the Jacarepaguá Lagoon sediments took place in order to choose a place where its sediments could be dredged to be later used in the drainage facilities. The results indicated areas where the threshold level 1 (low probability of adverse effects) issued by the general procedures for sediments quality assessments for dredging purposes, Resolution no 344 of the Brazilian Federal Government, was surpassed. Levels above the limits established for cadmium (Cd), lead (Pb), copper (Cu), nickel (Ni), and zinc (Zn) were detected. Based on this consideration the State Environmental Agency issued a permit allowing the organizers of 2011 Rock in Rio to dredge an area close to City of Rock in order to obtain coarse sediments for the drainage facilities. In addition, it was found that those sediments were ideal for this application since their hydraulic conductivity is on the order of 10^?2 cm/s.     

Archeoseismic study of damage in Roman and Medieval structures in the center of Cologne, Germany

The causes of damage observed in archeological records or preserved monuments are often difficult to be determined unequivocally, particularly when the possibility of secondary earthquake damage exists. Such secondary damage has been previously proposed for the Roman Praetorium, the governor’s palace in the center of Cologne. Ongoing excavations since 2007 revealed additional damage. The existing ground that has been uncovered and documented extends the affected area to 175?×?180 m. We present a comprehensive virtual model of the excavation area based on 200 3D laserscans together with a systematic analysis of the damage patterns and an improved model of the terrain during Roman/Medieval times including geotechnical parameters of the subsurface. Five locations with different damage patterns, including a Roman sewer, the octagonal central part of the Praetorium, a section with strongly inclined massive walls, a 13 m deep deformed well, a collapsed hypocaust, and damages in the Medieval mikveh are analyzed in detail. We use site-specific synthetic strong ground motion seismograms to test the possibility of earthquake-induced ground failures as a cause for the observed damage. This subsurface model is also used to test the possibility of hydraulically-induced damages by seepage and erosion of fine-grained material from stray sand. Heavy rainstorms can induce a direct stream of surface water through the fine sand layers to the ground water table. Simulated ground motion for assumed worst-case earthquake scenarios do not provoke slope instability at the level necessary to explain the structural damages.     

Sea surface temperature anomalies driven by oceanic local forcing in the Brazil-Malvinas Confluence

Sea surface temperature (SST) anomaly events in the Brazil-Malvinas Confluence (BMC) were investigated through wavelet analysis and numerical modeling. Wavelet analysis was applied to recognize the main spectral signals of SST anomaly events in the BMC and in the Drake Passage as a first attempt to link middle and high latitudes. The numerical modeling approach was used to clarify the local oceanic dynamics that drive these anomalies. Wavelet analysis pointed to the 8–12-year band as the most energetic band representing remote forcing between high to middle latitudes. Other frequencies observed in the BMC wavelet analysis indicate that part of its variability could also be forced by low-latitude events, such as El Niño. Numerical experiments carried out for the years of 1964 and 1992 (cold and warm El Niño-Southern Oscillation (ENSO) phases) revealed two distinct behaviors that produced negative and positive sea surface temperature anomalies on the BMC region. The first behavior is caused by northward cold flow, Río de la Plata runoff, and upwelling processes. The second behavior is driven by a southward excursion of the Brazil Current (BC) front, alterations in Río de la Plata discharge rates, and most likely by air-sea interactions. Both episodes are characterized by uncoupled behavior between the surface and deeper layers.     

Effects of seawater acidification on early development of the intertidal sea urchin Paracentrotus lividus (Lamarck 1816)

The effect of pH ranging from 8.0 to 6.8 (total scale - pH_T) on fertilization, cleavage and larval development until pluteus stage was assessed in an intertidal temperate sea urchin. Gametes were obtained from adults collected in two contrasting tide pools, one showing a significant nocturnal pH decrease (lowest pH_T = 7.4) and another where pH was more stable (lowest pH_T = 7.8). The highest pH_T at which significant effects on fertilization and cleavage were recorded was 7.6. On the contrary, larval development was only affected below pH_T 7.4, a value equal or lower than that reported for several subtidal species. This suggests that sea urchins inhabiting stressful intertidal environments produce offspring that may better resist future ocean acidification. Moreover, at pH_T 7.4, the fertilization rate of gametes whose progenitors came from the tide pool with higher pH decrease was significantly higher, indicating a possible acclimatization or adaptation of gametes to pH stress.     

Depth of closure: New calculation method based on sediment data

Obtaining depth of closure (DoC) in an accurate manner is a fundamental issue for coastal engineering, since good results for coastal structures and beach nourishment depend mainly on DoC. Currently, there are two methods for obtaining the DoC, mathematical formulations and profile surveys. However, these methods can incur important errors if one does not take into account the characteristics and morphology of the area, or if one does not have a sufficiently long time series. In this work the DoC is obtained from the break in the trend of the sediment with the depth, that is, in general with the increase of the depth a decrease in the size of the sediment takes place. However, at one point this tendency changes and the size increases, and then decreases again. When comparing the point where the minimum sediment size occurs before the increase, it is observed that the error incurred is small compared to other methods. If the Standard Deviation of Depth Change (SDDC) method is considered as the most accurate method, the error incurred by the proposed method is less than 7%. In addition, it can be seen that the dispersion of the sediment method always occurs outside the zone of bar movement. Whereas in the methods of profiles survey (using 2 cm precision profiles), sometimes the DoC is obtained within the active zone of bar movement. In addition, where the relative minimum of the median sediment size is found, and the sizes of 0.063 and 0.125 mm predominate in the composition of the sample. Therefore, this new method allows the precise location of the DoC to be obtained in a fast and simple way. Furthermore, this method has the advantage that it is not affected by the modifications that may be experienced by both the study area and the cross-shore beach profile.     

Development of FLEMOcs – a new model for the estimation of flood losses in the commercial sector

Abstract

The estimation of flood damage is an important component for risk-oriented flood design, risk mapping, financial appraisals and comparative risk analyses. However, research on flood-loss modelling, especially in the commercial sector, has not gained much attention so far. Therefore, extensive data about flood losses were collected for affected companies via telephone surveys after the floods of 2002, 2005 and 2006 in Germany. Potential loss determining factors were analysed. The new Flood Loss Estimation MOdel for the commercial sector (FLEMOcs) was developed on the basis of 642 loss cases. Losses are estimated depending on water depth, sector and company size as well as precaution and contamination. The model can be applied to the micro-scale, i.e. to single production sites as well as to the meso-scale, i.e. land-use units, thus enabling its countrywide application.

Citation Kreibich, H., Seifert, I., Merz, B. & Thieken, A. H. (2010) Development of FLEMOcs – a new model for the estimation of flood losses in the commercial sector. Hydrol. Sci. J. 55(8), 1302–1314.     

Application and validation of FLEMOcs – a flood-loss estimation model for the commercial sector

Abstract

The estimation of flood loss is difficult, especially in the commercial sector, because of its great inhomogeneity. However, the reliability of loss modelling is fairly unknown, since flood-loss models are scarcely validated. The newly developed Flood Loss Estimation MOdel for the commercial sector (FLEMOcs) was validated on the micro-scale using a leave-one-out cross-validation procedure. Additionally, different meso-scale loss functions were compared. Meso-scale model application was undertaken in 19 municipalities which were affected during the 2002 flood in Germany. Model results were compared with the results of three other loss models, as well as with official loss records. The micro-scale validation shows very good results, with no bias and mean absolute errors between 23 and 31%. The meso-scale validation indicates that FLEMOcs provides good results, especially in large areas with many affected companies where high losses are expected.

Citation Seifert, I., Kreibich, H., Merz, B. & Thieken, A. H. (2010) Application and validation of FLEMOcs – a flood-loss estimation model for the commercial sector. Hydrol. Sci. J. 55(8), 1315–1324.