A decade of surface change on a Namib linear dune

Survey data from return visits to a linear dune in the Namib Desert provide information about change in dune form over a decade. The data demonstrate that, although change on these large features is slow, there is none the less considerable movement over this time-scale. The dunes are therefore confirmed to be currently active and not Pleistocene relics.     

Nutrient uptake in a highly turbid estuary (the Humber, United Kingdom) and adjacent coastal waters

Surveys were conducted in April and June 1995 to quantify the uptake of dissolved nutrients in a highly turbid estuary (the Humber, United Kingdom) and to determine the factors controlling nutrient uptake rates. A combination of isotope labelling methods were used in conjunction with on-deck incubation techniques to estimate the uptake of dissolved nutrients (PO₄ ^3?, NH₄ ⁺, NO₃ ^?, and urea) in surface samples collected from coastal waters. Similarly, isotope labelling and laboratory incubgation techniques were employed to estimate dissolved nitrogen uptake (NH₄ ⁺, NO₃ ^?, and urea) in surface samples collected from the estuary mouth. Nutrient uptake rates were at the low end of ranges for coastal and estuarine environments reported in the literature. Concentrations of chlorophyll and the availability of photosynthetically active radiation were identified as potentially important factors controlling the uptake rates of nutrients. Uptake rates of dissolved nitrogen in the Humber mouth appeared to be related to the location of smapling sites. Depletion rates of dissolved nutrients in situ were estimated on the basis of integrated water column nutrient uptake rates and indicated assimilation of up to 16% of nutrients in the entire water column. Estimated depletion rates did not indicate preferential loss of any of the nutrient species investigated.     

Bank erosion of an incised upland channel by subaerial processes: Tasmania,Australia

The headwaters of many rivers are characterized by gullies and incised streams that generate significant volumes of sediment and degrade downstream water quality. These systems are characterized by harsh climates, ephemeral flows that do not reach bank top, and bare cohesive banks of clay and weathered bedrock. We investigated the rates and processes of bank erosion in an incised canal that has such characteristics. Detailed measurements of bank position were made over two years with a purpose‐built groundprofiler and photo‐electronic erosion pins (PEEPs). Stage height and turbidity were also monitored. The bare banks eroded at 13 ± 2 mm a⁻¹. Erosion is controlled by subaerial processes that loosen bank material. Observations show that needle‐ice growth is important in winter and desiccation of clays predominates in summer. Flows are unable to erode firm cohesive clays from the banks, and erosion is generally limited by the availability of loosened material. This produces strong hysteresis in turbidity during events. Peak turbidity is related to the number of days with low flow between events, and not peak stage. Rehabilitation with a moderate cover of grass is able to prevent bank erosion by limiting the subaerial erosion processes. Projections of current erosion suggest that without vegetation cover the banks are unlikely to stabilize for many years. Copyright © 2000 John Wiley & Sons, Ltd.     

Quantification of the relation between surface morphodynamics and subsurface sedimentological product in sandy braided rivers

This study uses digital elevation models and ground‐penetrating radar to quantify the relation between the surface morphodynamics and subsurface sedimentology in the sandy braided South Saskatchewan River, Canada. A unique aspect of the methodology is that both digital elevation model and ground‐penetrating radar data were collected from the same locations in 2004, 2005, 2006 and 2007, thus enabling the surface morphodynamics to be tied explicitly to the associated evolving depositional product. The occurrence of a large flood in 2005 also allowed the influence of discharge to be assessed with respect to the process–product relationship. The data demonstrate that the morphology of the study reach evolved even during modest discharges, but more extensive erosion was caused by the large flood. In addition, the study reach was dominated by compound bars before the flood, but switched to being dominated by unit bars during and after the flood. The extent to which the subsurface deposits (the ‘product’) were modified by the surface morphodynamics (the ‘process’) was quantified using the changes in radar‐facies recorded in sequential ground‐penetrating radar surveys. These surveys reveal that during the large flood there was an increase in the proportion of facies associated with bar margin accretion and larger dunes. In subsequent years, these facies became truncated and replaced with facies associated with smaller dune sets. This analysis shows that unit bars generally become truncated more laterally than vertically and, thus, they lose the high‐angle bar margin deposits and smaller scale bar‐top deposits. In general, the only fragments that remain of the unit bars are dune sets, thus making identification of the original unit barform problematic. This novel data set has implications for what may ultimately become preserved in the rock record.     

An experimental test of whether bar instability contributes to the formation,periodicity and maintenance of pool–riffle sequences

Pool–riffle sequences (PRSs) are periodic river‐bed morphologies with wavelengths several times the channel width. Causes of PRS formation and maintenance are not clearly understood, which may limit the effectiveness of protection and rehabilitation measures. Some confusion has existed about whether the PRS morphology is the same as or distinct from alternate bars. In this paper we investigate whether the bar instability forming alternate bars also contributes to PRS formation, periodicity and maintenance. This was unclear because bar instability occurs only when the ratio of channel width/depth exceeds a critical value, generally understood to be approximately 10, which is larger than the width‐to‐depth ratio of many PRSs. A mobile‐bed physical model is used to test whether bar instability occurs in channels characteristic of PRS morphology, with low width‐to‐depth ratio, and high relative roughness. The physical model was scaled from a prototype PRS in a gravel and cobble bed river. Alternate bars formed in the model at channel width‐to‐depth ratios as low as 3·8. The wavelength of the alternate bars formed was generally 2·2–5 times channel width, which was similar to the prototype PRS. Therefore, bar instability can occur in virtually all PRSs, and it contributes to the widespread formation of periodic PRS morphology. The model showed that maintenance of the bar height in the prototype PRS also depends on variations in channel width. It is concluded that periodic PRSs are formed and maintained by the interaction between bar instability, and flow deflections associated with variations in channel geometry such as width variation. Resonance between bar instability and three‐dimensional bed forms such as alternate bars and variations in channel geometry. Variations in channel geometry are also important in determining the location and dimensions of individual pools and bars. Copyright © 2008 John Wiley & Sons, Ltd.     

Seasonal reorganization of subglacial drainage inferred from measurements in boreholes

The effect of the formation of a major subglacial drainage channel on the behaviour of the subglacial drainage system of Haut Glacier d'Arolla, Switzerland, was investigated using measurements of borehole water level and the electrical conductivity and turbidity of basal meltwaters. Electrical conductivity profiles were also measured within borehole water columns to identify the water sources driving water level changes, and to determine patterns of water circulation in boreholes. Prior to channel formation, boreholes showed idiosyncratic and poorly coordinated behaviour. Diurnal water level fluctuations were small and driven by supraglacial/englacial water inputs, even when boreholes were connected to a subglacial drainage system. This system appeared to consist of hydraulically impermeable patches interspersed with storage spaces, and transmitted a very low water flux. Drainage reorganization, which occurred around 31 July, 1993, in response to rapidly rising meltwater and rainfall inputs, seems to have involved the creation of a connection between an incipient channel and a well-established channelized system located further down-glacier. Once a major channel existed within the area of the borehole array, borehole water level fluctuations were forced by discharge-related changes in channel water pressure, although a diversity of responses was observed. These included (i) synchronous, (ii) damped and lagged, (iii) inverse, and (iv) alternating inverse/lagged responses. Synchronous responses occurred in boreholes connected directly to the channel, while damped and lagged responses occurred in boreholes connected to it by a more resistive drainage system. Pressure variations within the channel resulted in diurnal transfer of mechanical support for the ice overburden between connected and unconnected areas of the bed, producing inverse and alternating patterns of water level response. © 1998 John Wiley & Sons, Ltd.     

An improved glacial isostatic adjustment model for the British Isles

The glacial isostatic adjustment (GIA) of the British Isles is of interest due to the constraints that can be provided on key model parameters such as the global meltwater signal, local ice sheet history and viscoelastic earth structure. A number of recent studies have modelled relative sea‐level (RSL) data from this region to constrain model parameters. As indicated in these studies, the sensitivity of these data to both local and global parameters results in a highly non‐unique problem. This study aims to address this inherent non‐uniqueness by combining a previously published British–Irish ice model that is based on the most recent geomorphological data with a new global ice sheet model that provides an accurate prediction of eustatic sea‐level change. In addition, constraints from Global Positioning System (GPS) measurements of present‐day vertical land motion are considered alongside the entirety of RSL data from both Great Britain and Ireland. A model solution is found that provides a high‐quality fit to both the RSL data and the GPS data. Within the range of earth viscosity values considered, the optimal data model fits were achieved with a relatively thin lithosphere (71 km), upper mantle viscosities in the range 4–6 × 10²⁰ Pa s and lower mantle viscosities ≥ 3 × 10²² Pa s. Copyright © 2011 John Wiley & Sons, Ltd.     

U-Pb Saturn: New U-Pb/Pb-Pb Data Reduction Software for LA-ICP-MS

U-Pb Saturn is new freeware for U-Pb LA-ICP-MS data reduction. It has been developed to provide easy interaction with and visualisation of LA-ICP-MS U-Pb datasets, and allows fast and reliable data reduction of hundreds of data-points. Saturn offers dynamic graphic interfaces to quickly view, evaluate, and plot U-Pb and Pb-Pb isotope data. It operates online (or offline), giving the freedom to change parameters and reprocess data at any stage of data acquisition. The main interface allows the user to: (1) choose the best statistics for drift correction, (2) include/exclude offset factors and (3) apply (or not) Pb_c corrections in different modes. Signal intensities are displayed in a separate graphic interface that allows users to interact with the time-resolved signal of individual spot analyses. All graphic windows are interactive; any modification to data treatment (e.g., inclusion or exclusion of analyses of reference material, or modification of the time-resolved signal windows) is instantaneously updated on the data tables. Saturn is particularly attractive for beginners in LA-ICP-MS U-Pb geochronology as it is non-commercial, easy to install, and very interactive. Coding information and a version of the software can be accessed at http://www.air.ufop.br .     

Global Snow Mass Measurements and the Effect of Stratigraphic Detail on Inversion of Microwave Brightness Temperatures

Snow provides large seasonal storage of freshwater, and information about the distribution of snow mass as snow water equivalent (SWE) is important for hydrological planning and detecting climate change impacts. Large regional disagreements remain between estimates from reanalyses, remote sensing and modelling. Assimilating passive microwave information improves SWE estimates in many regions, but the assimilation must account for how microwave scattering depends on snow stratigraphy. Physical snow models can estimate snow stratigraphy, but users must consider the computational expense of model complexity versus acceptable errors. Using data from the National Aeronautics and Space Administration Cold Land Processes Experiment and the Helsinki University of Technology microwave emission model of layered snowpacks, it is shown that simulations of the brightness temperature difference between 19 and 37 GHz vertically polarised microwaves are consistent with advanced microwave scanning radiometer-earth observing system and special sensor microwave imager retrievals once known stratigraphic information is used. Simulated brightness temperature differences for an individual snow profile depend on the provided stratigraphic detail. Relative to a profile defined at the 10-cm resolution of density and temperature measurements, the error introduced by simplification to a single layer of average properties increases approximately linearly with snow mass. If this brightness temperature error is converted into SWE using a traditional retrieval method, then it is equivalent to ±13 mm SWE (7 % of total) at a depth of 100 cm. This error is reduced to ±5.6 mm SWE (3 % of total) for a two-layer model.