Nonlinear sediment thickness increase on the western East Pacific Rise flank, 45°S

Sediment thickness was evaluated on the western flank of the East Pacific Rise (EPR) at 45°S, based on high-resolution seismic data gathered during cruise 213/2 of R/V Sonne in 2011. Two zones with distinctly different sediment thickness were identified, separated by a transitional zone bordering a pseudo-fault. Sediment in the more distal zone 2 is almost twice as thick (~120 m) as in zone 1 close to the EPR. This is in contrast to the expected progressive sedimentary column thickening with seafloor age and distance from the spreading axis. The younger of two seismic units detected within the sedimentary column (EPR-2) occurs mainly in the distal zone on crust older than 9 Ma, whereas on younger crust it is present only in small isolated bodies. Both sedimentary units drape the basement. The drape is interpreted to represent particle settling from suspension and a generally low regional primary productivity. The spatial variation in sediment thickness cannot be explained by existing models, and other processes considered in the present case are (1) higher productivity in the western sector of the survey area, where thicker sediments were observed (zone 2), (2) the formation of sediment drifts near basement highs (‘seamount effect’), due to flow of Lower Circumpolar Deep Water affecting sediment deposition, and (3) erosion and/or non-deposition of the younger EPR-2 unit, due to elevated bed shear stresses associated with eddies transferring kinetic energy to the seafloor     

“Lessons for marine conservation planning: A comparison of three marine protected area planning processes”

Various approaches have been used to establish marine protected areas (MPAs) in different countries. In this paper we compare and review three processes to establish MPAs within the United States and Australia. These two countries share many similarities in their cultures, but their approaches to managing marine resources differ considerably. Each of these efforts to establish or review MPAs was motivated by concern about declines of targeted marine species or habitats. However, the government actions varied because of differences in governance, planning process including public input, and the role of science. Comparing these processes highlights effective approaches for protecting marine ecosystems and gaining public support.     

Extension of the Paraná Basin to offshore Brazil: Implications for coalbed methane evaluation

Coalbed methane (CBM) is a worldwide exploration target of the petroleum industry. In Brazil, the most important coal-bearing succession is associated with the Permian Rio Bonito Formation of the Paraná Basin. The gas-prone areas are located at the southeastern margin of the Paraná Basin and possibly in the offshore region of the northern part of the Pelotas Basin. Coalfields end abruptly at the present day shoreline, a result of rifting of Gondwana and the evolution of the South Atlantic Ocean. All geologic indicators suggest that in pre-rift times the coal seams extended further eastwards, probably now lying deeply buried below the sedimentary succession of the Pelotas Basin. The present paper discusses structural, stratigraphic, seismic and aeromagenetic data that support the preservation of continental crust beneath ocean sediment. If the coal beds had similar lateral extent to known onshore coals, and coal beds extended across the projected extension of the Parana basin, and there was a conservative 5 m of cumulative coal thickness, then a potential methane volume can be estimated for this newly inferred resource. Average onshore coal gas content is 32 scf/ton (1.00 m³/ton). If this is similar in the offshore coal deposits, then the hypothetical methane volume in the offshore area could be in excess of 1.9 × 10¹² scf (56 × 10⁹ m³). Metamorphism from dikes associated with rifting are potential complicating factors in these deposits, and since no borehole reaching the deep-lying strata in the offshore area are available, this is a hypothetical gas resource with a certain level of uncertainty which should be tested in the future by drilling a deep borehole.     

Nitrogen inputs to seventy-four southern New England estuaries: Application of a watershed nitrogen loading model

Excess nitrogen inputs to estuaries have been linked to deteriorating water quality and habitat conditions which in turn have direct and indirect impacts on aquatic organisms. This paper describes the application of a previously verified watershed loading model to estimate total nitrogen loading rates and relative source contributions to 74 small-medium sized embayment-type estuaries in southern New England. The study estuaries exhibited a gradient in nitrogen inputs of a factor of over 7000. On an areal basis, the range represented a gradient of approximately a factor of 140. Therefore, all other factors being equal, the study design is sufficient to evaluate ecological effects conceptually tied to excess nitrogen along a nitrogen gradient. In addition to providing total loading inputs rates to the study estuaries, the model provides an estimate of the relative contribution of the nitrogen sources from each watershed to each associated estuary. Cumulative results of this analysis reveal the following source ranking (means): direct atmospheric deposition (37%), ≈wastewater (36%), >indirect atmospheric deposition (16%) > fertilizer (12%). However, for any particular estuary the relative magnitudes of these source types vary dramatically. Together with scientific evidence on symptoms of eutrophication, the results of this paper can be used to develop empirical pressure-state models to determine critical nitrogen loading limits for the protection of estuarine water quality.     

In Memoriam

Abstract

The engineering properties of deep continental margin sediments were determined on a worldwide basis. Deep Sea Drilling Project (DSDP) core data and material were utilized from over 900 cores obtained from 89 sites, primarily on the continental margins. Cores were recovered from penetrations to 200 m in water depths averaging 3000 m. Supplementary laboratory testing on selected cores was directed toward determining index properties and shear strength properties of the sediments. The study included a literature review of deep‐sea soil properties, the results of which are to be used by DSDP to evaluate foundation conditions for reentry cones with long casing strings. The results will also be used for a feasibility study of an ultradeepwater marine riser and well‐control system. The marine sediments examined can be divided into three main types: clay, calcareous ooze, and siliceous ooze. Sediment distribution consisted of 48% calcareous ooze, 43% clay, 6% siliceous ooze, and 3% volcanic ash. Because of the sample disturbance inherent in the deepwater coring operation, emphasis was placed on analyzing sediment properties not significantly affected by changes in in situ stresses and structure caused by sampling. Averages and ranges in values of water content and unit weight are presented for the three main sediment types. Plasticity and strength characteristics are discussed in detail and the elastic and compression properties are outlined. The geotechnical properties of deep continental margin soils are summarized.     

Instrumentation of SEASWAB experiment

Abstract

From September 1975 to April 1976 offshore production Platform V in South Pass, Block 28 (East Bay, Louisiana), was instrumented to measure the effect of storm waves on the soft sediments typical of the Mississippi delta (in a project given the acronym SEASWAB). A portion of this project consisted of four identifiable units of instrumentation (see note): (1) an accelerometer package buried 1 m in the sediment to measure three‐dimensional sediment accelerations and an associated pressure transducer, which measured wave‐induced pressures; (2) an array of instruments that included a wave staff, electromagnetic current meter, and a pressure transducer to examine various relationships between wave properties; (3) a wave‐, current‐, and wind‐measuring station 3.35 km inshore of Platform V to determine the transformation of the waves as they moved over the sediments; and (4) a transponder buried in the mud, the position monitored so that long‐term mudflow could be measured. The direct measurement of seafloor oscillations required the unique instrumentation of the accelerometer system. Three Bruel and Kjaer 8306 accelerometers mounted at right angles to each other made possible the measurement of small oscillations (～0.01 m) at low frequencies (0.1–0.3 Hz). The acoustic method of measuring long‐term mudflow was subject to problems associated with sound propagation in shallow water. The range of the system was found to be 2.74 km, apparently independent of depth. Multiple returns received after single interrogations of the transponder decreased the accuracy of the system.     

Thermal conductivity and permeability assessment by electrical resistivity measurements in marine sediments

Abstract

The problem of radioactive waste containment, the modeling of hydrocarbon formation processes, and the proposed laying of fiber‐optic communication cables on the seafloor have recently focused attention on the thermal and fluid flow properties of porous media. Both properties are difficult to determine accurately for large volumes of material, particularly where disturbance is inevitable either on sampling or penetration of the measuring device. Both properties, however, have been tentatively identified as bearing some form of analogy with electrical flow, and evaluation of these relationships with electrical measurements may provide practical means of obtaining rapid coverage of the sediment from a semi‐remote position. Using a variety of laboratory cells, an attempt has been made to evaluate useful relationships between electrical formation factor and thermal conductivity and/or permeability for both sands and clays. Formation factor exhibits a close relationship with permeability, and the capability of predicting permeability to within an order of magnitude is shown providing the grade of sediment is identified (e.g., sand or clay). Formation factor is related to porosity and while any one sample is best represented by Archie's (sands) or Winsauer's (clays) empirical law, the overall trend is a third‐degree polynomial; particle shape appears to dominate both porosity and permeability relationships with electrical formation factor. Thermal conductivity shows a clear dependence on the porosity of a saturated sediment. The successful prediction of thermal conductivity using a geometrical model requiring volume and thermal conductivity values for the components has been demonstrated for a variety of particle shapes and sizes. Thermal conductivity may be related to formation factor through the porosity of the sample for both sands and clays.     

Evaluation of policy options for the live reef food fish trade in the province of Palawan,Western Philippines

The live reef food fish (LRFF) trade has an estimated annual retail value of US$1 billion in the Asia-Pacific region and at least US$30 million in the Philippines. Palawan Province is the trade's center accounting for as much as 55% of the commodity's total export. Concern about the LRFF trade has caused the Palawan Provincial government to take action to regulate the trade. Four key policy options to address the short-term policy objective of developing a sustainable LRFF industry through the reduction of threats associated with destructive fishing and overfishing were proposed. These four policy options and associated analyses were presented to stakeholders at three separate policy consultations. The stakeholders reached a consensus that a regulated LRFF trade was the most sensible option. As a result, the Provincial Government of Palawan took action to enact “The Palawan Live Reef Fish Ordinance of 2006”, which provides for the sustainable and integrated regulation of the LRFF industry. This provincial ordinance will assist in crafting a national policy for the LRFF trade and may also be useful in revising the 1998 Philippine Fisheries Code. The key challenge is how to translate the ordinance provisions into effective on-the-ground actions.     

Systematic marine conservation planning in data-poor regions: Socioeconomic data is essential

Systematic planning for conservation is highly regarded but relies on spatially explicit data that are lacking in many areas of conservation concern. The decision support tool Marxan is applied to a reef system in the central Philippines where 30 marine protected areas (MPAs) have been established in communities without much use of biophysical data. The intent was to explore how Marxan might assist with the legally required expansion to protect 15% of marine waters, and how existing MPAs might affect that process. Results show that biophysical information alone did not provide much guidance in identifying patterns of conservation importance in areas where the data are poor. Socioeconomic data were needed to distinguish among possible areas for protection; but here, as elsewhere in marine environments, the availability of such data was very limited. In the final analysis, local knowledge and integrated understanding of socioeconomic realities may offer the best spatially explicit information. The 30 existing MPAs, which encompassed a small proportion of the reef system, did not limit future options in developing a suite of MPAs on a broader scale. Rather, they appeared to generate the support for MPAs that is obligatory for any larger zoning effort. In summary, establishing MPAs based on community-driven criteria has biological and social value, but efforts should be made to collect ecological and socioeconomic data to guide the continued creation of MPAs.     

Sampling the vertical particle flux in the upper water column using a large diameter free-drifting NetTrap adapted to an Indented Rotating Sphere sediment trap

Further development of the large, surface-tethered sediment trap (NetTrap) employed as part of the MedFlux program is described whereby the large collection capacity of the NetTrap is combined with an Indented Rotating Sphere/Sample Carousel (IRSC) sediment trap (IRSC–NT). This trap is capable of collecting particle flux either in a time series or settling velocity mode; settling velocity mode allows the collection of particles that fall within discrete settling velocity intervals. During short field deployments in the Mediterranean Sea the IRSC–NT configured in the settling velocity mode successfully collected unpoisoned samples for chemical and microbiological experiments. In addition to the development of the IRSC–NT, particle-settling behavior above and below the swimmer-excluding IRS valve was tested during on-deck experiments using a specially constructed water-tight trap. Chemical analyses of settling materials (published elsewhere) suggested that separation of particles by settling velocity was achieved. However, due to the motion of the ship, it was not possible to directly measure particle-settling velocities within the trap. Particle release from the IRS did not bias the apparent settling velocity spectrum. Rotation of the IRS did not engender turbulence at the surface of the sphere or within the skewed funnel below. Tests of different ball designs over the course of the MedFlux program showed that a “ridge and saddle” pattern was optimal for efficiently transferring particles under the IRS seal while still reducing swimmer entrance to the collection funnel. The large size of the IRSC–NT did not prevent it from drifting effectively with the current. Several modifications of the present design are proposed that should improve the accuracy of the settling velocity measurements.