Paleostress-tensor analysis of late deformation events in the Odenwald Crystalline Complex and comparison with other units of the Mid-German Crystalline Rise, Germany

Summary Geometric data of fault planes and fault plane lineations, together with the observed sense of shear on the slip planes, were used to calculate paleostress tensors and fields responsible for the post metamorphic peak D3 and D4 deformation events in the four Odenwald units sensu Krohe (1991). The paleostress fields were calculated using the method of Will and Powell (1991). As inferred from the paleostress analysis, the D3 strike-slip deformation west of the Otzberg fault zone was caused by a, ± N-S directed, compressional regional stress field, with shallowly plunging σ₁ axes and σ₃ directions that plunge at shallow to moderate angles to the E or W; the calculated mean orientations are: σ₁ 06 → 350, σ₂ 77 → 234 and σ₃ 12 → 085. The B?llsteiner Odenwald east of the Otzberg fault zone was not affected by this stress field. This implies that the Bergstr?sser and B?llsteiner Odenwald were spatially separated and formed independent crustal blocks during D3. The D4 faulting event is recognised in all areas investigated, even though most prominently in units III and IV, and juxtaposed the Bergstr?sser and B?llsteiner Odenwald. This faulting episode was caused by a paleostress field with a steeply westerly plunging σ₁ axis and a shallowly southsoutheasterly plunging σ₃ axis. The orientations of the principal stresses are: σ₁ 52 → 270, σ₂ 38 → 085 and σ₃ 06 → 174. With continued deformation from D3 to D4, there was a progressive change in the orientation of the stress field indicating a change from a N-S compressional to extensional stress field, accompanied by the progressive development of strike-slip faults and late normal faults. Paleostress field orientations in the Pfalz Forest, SW of the Odenwald, determined by Fl?ttmann and Oncken (1992) are very similar to those obtained for the Odenwald region and indicate a regionally consistent stress pattern in the southwestern part of the Mid-German Crystalline Rise (MGCR) during strike-slip and normal faulting deformations.

---

Zusammenfassung Paleostress-Tensor Analyse sp?ter Deformationsereignisse im Odenwald-Kristallin und ein Vergleich mit anderen Einheiten der Mitteldeutschen Kristallinzone, Deutschland Für die vier Odenwald-Einheiten im Sinne von Krohe (1991) wurden Pal?ostressfelder für die Blattverschiebungs- und Abschiebungsereignisse D3 und D4 mit der Methode von Will und Powell (1991) berechnet. Die Analyse ergibt, da? das regionale Spannungsfeld, das westlich der Otzberg-Zone im Bergstr?sser Odenwald zum D3-Ereignis führte, ein ± N-S gerichtetes kompressives Stresssfeld war. Die σ₁-Achse f?llt flach nach N bzw. S ein, die σ₃-Achse mit kleinen bis moderaten Winkeln nach E bzw. W; die berechneten Orientierungen der Hauptspannungsrichtungen sind: σ₁ 08 → 350, σ₂ 77 → 234 and σ₃ 12 → 085. Der B?llsteiner Odenwald, ?stlich der Otzberg-Zone, wurde von diesem Spannungsfeld nicht erfa?t. Dies impliziert, da? Bergstr?sser und B?llsteiner Odenwald w?hrend des D3-Ereignisses voneinander getrennt waren und separate Krusteneinheiten darstellten. Auswirkungen der D4-Deformation k?nnen im gesamten Untersuchungsgebiet erkannt werden, am st?rksten jedoch in den Einheiten III und IV. Dieses Ereignis wurde von einem Pal?ostressfeld mit einer steil nach W einfallenden σ₁- und einer flach nach SSE einfallenden σ₃-Achse verursacht und führte zum Zusammenschlu? von Bergstr?sser und B?llsteiner Odenwald. Die berechneten Orientierungen der Hauptspannungsrichtungen sind: σ₁ 52 → 270, σ₂ 38 → 085 und σ₃ 06 → 174. Die Rotation der Hauptspannungsrichtungen war mit einer ?nderung von einem kompressionalen N-S gerichteten (D3) hin zu einem extensionalen (D4) Stressfeld verbunden. Die erzielten Ergebnisse sind sehr ?hnlich mit Resultaten, die Fl?ttmann und Oncken (1992) im Pf?lzer Wald ermittelten. Dies weist auf ein regional übereinstimmendes Spannungsfeld im SW-Teil der Mitteldeutschen Kristallinzone hin.

---

---

Received July 8, 1999; revised version accepted March 28, 2000     

A model for the constant-head pumping test conducted in vertically fractured media

An analytical model for the constant-head pumping test is developed for a partially penetrating well that has a finite thickness skin, and intersects a single vertical fracture. In the model, the fracture is fully confined and flow occurs only in the fracture. The model is developed using Laplace transform and finite Fourier transform methods. The model is to be used for analysing well test data from vertically fractured media and for verifying numerical models. Dimensionless curves are used to study the effects of a finite thickness skin and a partially penetrating wellbore. In the presence of a finite thickness skin, or a partially penetrating wellbore, a typical flow response for the constant-head pumping test has three distinct periods of flow corresponding to small-, intermediate- and large-time. Small- and large-time approximations are presented for the model. For tests where the wellbore is fully penetrating, or the partial penetration ratio is known, these approximations can be used to analyse field data.     

Realisation of a celestial system based on VLBI geodynamics programs

The relative orientations of various VLBI celestial reference frames are evaluated on the basis of coordinate differences of common sources. It is shown that an accuracy better than 0.001 can be achieved. Possible regional deformations in the different catalogues are investigated; they are found to reach a few 0.001 in some restricted zones. The application of these studies to the realisation of a combined celestial reference frame consistent with the BIH Terrestrial System is outlined.     

Harpacticoida taxocen diversity in the silty-sandy littoral zone of Kandalaksha Bay of the White Sea

The fauna composition, ecological groups, and life forms of Harpacticoids of soft littoral grounds from 15 sites off the Karelian coast in Kandalaksha Bay of the White Sea were studied. Six types of harpacticoid taxocens with different sets of dominating species are described. On silty sands with clear signs of desalination, the Stenchelia palustris taxocen is common; medium-grained sands are characterized by the Heterolaophonte minuta, Paraleptastacus kliei — Huntemannia jadensis, and Amphiascoides nanus — Scottopsyllus minor taxocens; while on coarse sands, the Ameira parvula and Ameira scotti — Mesochra lilljeborgi taxocens have developed. The diversity of the taxocens is partly explained by the differences in the grain-size composition and salinity at different sites. In addition, groups of various taxocens dwelling on the same type of the sediments were found in different minor bights of the coastline.     

Laboratory simulation of volatilisation from melts induced by micrometeoroid impacts

The laboratory simulation experiments on volatilization from the melts formed due to micrometeoroid impacts on the lunar surface were carried out. The simulation was performed using modulated laser pulses incident on rocks and minerals in vacuum; in so doing microcraters on the targets, glass particles, condensates were formed and gases solved in the bulk of the rock and mineral grains were released. It is shown that volatilization from only the crater glass layers is negligible, which fully confirms the theoretical predictions of Nussinov and Chernyak.The volatilizations from the drops formed by the micrometeoric impacts can be noticeable. For micron-sized drops, predominant among the others after the impact, the volatilization of Na, K and other volatiles can be up to 10 to 20%. For larger-sized (d10² m) drops the volatilization should lead to the appearance of the significant gradients of the element concentrations over the particle cross-section and as a result of their normalization it leads to the surface enrichment by some elements (Si and others).The mechanism of dust formation due to the surface rocks attack by volatilizing alkaline metals (Naughtonet al.) on the Moon probably is not effective. It is the consequence of such a fact that the condensate of the target materials evaporated due to other simultaneous micrometeoric impacts and had the same (as the target has) elemental composition is the very strong background for volatilizing and condensating alkaline elements.Preliminary conclusions about a possible correlation between the composition and the sizes of dust particles in the Solar system and in the Universe (at similar initial composition) have been drawn.     

Some simple limits on size and rotation speed of astrophysical objects emitting by accretion

We demonstrate that the so-called force balance point, due to either magnetic fields (then known more specifically as the Alfvén point) or to co-rotation (Roche point), together with the concepts of flux and mass conservation, allows one to place interesting limits on both the size and angular velocity of astrophysical objects emitting by mass accretion. We give three numerical examples, which would seem to be of some astrophysical interest.     

Haze Research in Brunei Darussalam During the 1998 Episode

— Brunei Darussalam experienced a severe haze episode between the beginning of February and the end of April 1998 due mainly to local peat and forest fires in Brunei and in neighbouring Sabah and Sarawak. The extensive research studies of the haze carried out in Brunei are outlined together with selected results. Particulate matter (PM₁₀) was the only significant criteria pollutant and it exceeded WHO guidelines and accepted air quality standards on most days during the haze episode. Gaseous criteria pollutants (CO, SO₂, NO₂, O₃) were generally well below WHO guidelines and at these concentrations they are expected to have no significant health or environmental effects. Measurements of volatile organic compounds (VOCs) revealed the presence of benzene, toluene, ethylbenzene, and xylenes (BTEX), aldehydes, phenol, and polynuclear aromatic hydrocarbons (PAHs). Personal exposure monitoring of PM₁₀ revealed significant differences in exposure patterns between different individuals depending on the location, time and activity. Data on outpatient visits showed an increase for some illnesses (e.g., acute respiratory infection) during the months of haze. No significant impacts of haze on rainwater acidity or deposition were noted. Emission factors for some volatile compounds were determined in combustion experiments in which peat was burned at temperatures typical of smouldering.     

SENSITIVITY OF MALARIA, SCHISTOSOMIASIS AND DENGUE TO GLOBAL WARMING

Global assessment of the potential impacts of anthropogenically-induced climate change on vector-borne diseases suggests an increase in extent of the geographical areas susceptible to transmission of malarial Plasmodium parasites, dengue Flavivirus and Schistosoma worms. The transmission potential of the three associated vector-borne diseases studied is highly sensitive to climate changes on the periphery of the currently endemic areas and at higher altitudes within such areas. Our findings vis-à-vis the present endemic areas indicate that the increase in the epidemic potential of malaria and dengue transmission may be estimated at 12–27% and 31–47%, respectively, while in contrast, schistosomiasis transmission potential may be expected to exhibit a 11–17% decrease.     

Cation ordering of orthopyroxenes from the Skaergaard Intrusion: implications for the subsolidus cooling rates and permeabilities

 We have determined the quenched cation ordering states of five orthopyroxene crystals collected from the marginal border group and the lower zone a and b of the Skaergaard intrusion, and modeled these data to retrieve their closure temperatures (T _c) of Fe–Mg ordering and cooling rates. According to existing thermal models for the Skaergaard pluton, conductive cooling dominated the high and low temperature regimes, which were separated by an intermediate temperature regime in which the cooling was controlled primarily by convective fluid circulation. The cooling rates retrieved from the quenched cation ordering states of the orthopyroxene crystals strictly apply to temperatures around the closure temperatures of the ordering states, ∼340–400^° C, which fall at the transition from convective to the lower temperature conductive cooling. The cooling rates obtained from the cation ordering states of orthopyroxene vary from ∼1 to 270 K/ka. These results agree well with a thermal model calculated using an assumed average permeability of 10^-12 cm² for the pluton, but not completely with a model calculated on the basis of an average permeability of 10^-13 cm², although both values produced shifts of δ¹⁸O that are comparable to those observed in the pluton. Received: 27 February 1995/Accepted: 20 July 1995