Numerical Modeling of the Observed Wiechert Seismograph Magnification

—The paper presents results of experiments designed to measure the actual dynamic magnification of the Wiechert 1000 kg horizontal seismometer when excited by seismic waves. This is accomplished by comparing 51 digital records of seismic events recorded by the Wiechert and a well calibrated reference seismometer. The results obtained indicate that the magnification of the Wiechert seismometer is influenced by the interaction of its mass and frame, especially for high frequencies. This interaction has been modeled by considering a system of two coupled pendulums, yielding a theoretical dynamic magnification curve which exhibits main features of the observed magnification. The dis crepancy between the nominal and the actual response of the Wiechert seismograph may lead to errors in studies involving spectral analyses of recorded seismograms, and to overestimation of local earth quake magnitudes.     

Penetrative convection in rotating fluids: A model for the base of stellar convection zones

Abstract

To model penetrative convection at the base of a stellar convection zone we consider two plane parallel, co-rotating Boussinesq layers coupled at their fluid interface. The system is such that the upper layer is unstable to convection while the lower is stable. Following the method of Kondo and Unno (1982, 1983) we calculate critical Rayleigh numbers R_c for a wide class of parameters. Here, R_c is typically much less than in the case of a single layer, although the scaling R_c～T^2/3 as T → ∞ still holds, where T is the usual Taylor number. With parameters relevant to the Sun the helicity profile is discontinuous at the interface, and dominated by a large peak in a thin boundary layer beneath the convecting region. In reality the distribution is continuous, but the sharp transition associated with a rapid decline in the effective viscosity in the overshoot region is approximated by a discontinuity here. This source of helicity and its relation to an alpha effect in a mean-field dynamo is especially relevant since it is a generally held view that the overshoot region is the location of magnetic field generation in the Sun.     

Spectrophotometric Variability of Mira

Data from the Pulkovo spectrophotometric data base on the absolute quasimonochromatic fluxes from oCet in the 320–1080 nm range are used to determine the physical parameters of this star in different phases of its light curve. The continuum emission layer is found to expand between the phases of the cycle corresponding to the rising and falling branches of the light curve. The average expansion velocity is 32 km/s. By the time the star’s brightness has fallen by roughly three magnitudes, its radius has increased by almost a factor of three. Over this same time the temperature of the layer has fallen from 3000 K to 2200 K. For this expansion velocity, the calculated mass rate loss is ⊙ M /year.__________Translated from Astrofizika, Vol. 48, No. 2, pp. 175–189 (May 2005).     

Platinum-group elements in alpine-type ultramafic rocks and related chromite ores of the main ophiolite belt of the Urals

On the basis of a representative collection of ultramafic rocks and chromite ores and a series of technological samples from the largest (Central and Western) deposits in the Rai-Iz massif of the Polar Urals and the Almaz-Zhemchuzhina and Poiskovy deposits in the Kempirsai massif of the southern Urals, the distribution and speciation of platinum-group elements (PGE) in various type sections of mafic-ultramafic massifs of the Main ophiolite belt of the Urals have been studied. Spectral-chemical and spectrophotometric analyses were carried out to estimate PGE in 700 samples of ultramafic rocks and chromite ores; 400 analyses of minerals from rocks, ores, and concentrates and 100 analyses of PGE minerals (PGM) in chromite ores and concentrates were performed using an electron microprobe. Near-chondritic and nonchondritic PGE patterns in chromitebearing sections have been identified. PGE mineralization has been established to occur in chromite ore from all parts of the mafic-ultramafic massifs in the Main ophiolite belt of the Urals. The PGE deposits and occurrences discovered therein are attributed to four types (Kraka, Kempirsai, Nurali-Upper Neiva, and Shandasha), which are different in mode of geological occurrence, geochemical specialization, and placer-forming capability. Fluid-bearing minerals of the pargasite-edenite series have been identified for the first time in the matrix of chromite ore of the Kempirsai massif (the Almaz-Zhemchuzhina deposit) and Voikar-Syn’ya massif (the Kershor deposit). The PGE grade in various types of chromite ore ranges from 0.1–0.2 to 1–2 g/t or higher. According to technological sampling, the average PGE grade in the largest deposits of the southeastern ore field of the Kempirsai massif is 0.5–0.7 g/t. Due to the occurrence of most PGE as PGM 10–100 mm in size and the proved feasibility of their recovery into nickel alloys, chromites of the Kempirsai massif can be considered a complex ore with elevated and locally high Os, Ir, and Ru contents. The Nurali-Upper Neiva type of ore is characterized by small-sized primary deposits, which nevertheless are the main source of large Os-Ir placers in the Miass and Nev’yansk districts of the southern and central Urals, respectively.     

Climatic response of thick leaf spruce (Picea crassifolia) tree-ring width at different elevations over Qilian Mountains, northwestern China

Tree-ring cores of thick leaf spruce (Picea crassifolia) taken from four sites at different elevations, in the middle of the Qilian Mountains, in the arid and semi-arid region of northwestern China, were used to develop four tree-ring width chronologies using standard dendrochronological methods. Results indicate that with increasing altitude the chronologies’ year-to-year variations decreased. Hence, the sensitivity of the tree-ring chronologies to climate decreases with altitude. Further analysis showed that the significant limiting factor on tree growth is spring precipitation. Measurements of stomata density and leaf dry weight suggest the species’ ecological adaptation strategy changes with elevation. At high elevation the metabolic rate of thick leaf spruce decreases, thus showing the effect of the climate.     

Possible representation for discovery observations of stellar flares

It is shown that the chronology of flare star discoveries in the Pleiades cluster and the Orion association can be described satisfactorily by various distribution functions (gamma, binomial, decreasing exponential, and delta) for the mean frequencies of stellar flares. However, it has been found that this is due to the uncertainty in the observationally derived distribution function for the mean frequency of stellar flares. The most likely function is that derived by Ambartsumian, which has a physical basis.Translated fromAstrofizika, Vol. 38, No. 1, pp. 25–32, January–March, 1995.     

Effects of early season defoliation ofAnthyllis cytisoides(a Mediterranean browse species) on further herbivore attack

To determine if defoliation of a woody plant affects foraging by folivorous insects, we examined the infection rate (number of leaves damaged per total number of leaves sampled on marked stems) ofAnthyllis cytisoidesunder three experimental treatments: 10, 50 and 90% plant defoliation. Observations were made for three age classes, established by trunk base perimeter (equal to or lower than 11 cm, between 11 and 20 cm, larger than 20 cm). Plants respond positively to artificial defoliation by increasing total vegetative length of the stem and total inflorescence length. This response is most evident in young individuals.Response to herbivory was measured as overall infection rate and also as infection rate by different feeding guilds—chewing, mining, or sucking insects. We found that increased defoliation elicited increased resistance of leaves to insect attack. This was particularly evident in young plants. Different insect guilds respond in different ways. Attack by chewing insects declines with defoliation for all plant age classes; only sucking insects which feed on the oldest plants reduce feeding rate with plant defoliation. Finally, mining insects present the opposite trend in young and senescent plants.     

Microfossils from the Lower Kundelungu (Late Precambrian) of Zambia

Lower Kundelungu black argillites and silty dolomicrites from the Ndola area contain a rich microfossil assemblage, of which several forms can be attributed to the form-genus Fibularix Pflug, 1965. The same assemblage has also been found in fine-grained, mildly metamorphosed sedimentary rocks from Kalengwa and Karibarembi (North-Western Province). These findings support the Kundelungu correlation of the Kalengwa and Karibarembi successions.Three new species of Fibularix are described and illustrated. Seven types of sphaeromorphs are described and illustrated, though treated informally. Some sphaeromorphs are detached parts of Fibularix chains.The Lower Kundelungu microfossils resemble very closely some palynomorphs that occur in the Brioverian (Late Precambrian) of France, in the Libby Formation (Belt) of the northwestern United States, and in other formations of Late Precambrian age.     

Hanford tank residual waste – Contaminant source terms and release models

Residual waste is expected to be left in 177 underground storage tanks after closure at the US Department of Energy’s Hanford Site in Washington State, USA. In the long term, the residual wastes may represent a potential source of contamination to the subsurface environment. Residual materials that cannot be completely removed during the tank closure process are being studied to identify and characterize the solid phases and estimate the release of contaminants from these solids to water that might enter the closed tanks in the future. As of the end of 2009, residual waste from five tanks has been evaluated. Residual wastes from adjacent tanks C-202 and C-203 have high U concentrations of 24 and 59 wt.%, respectively, while residual wastes from nearby tanks C-103 and C-106 have low U concentrations of 0.4 and 0.03 wt.%, respectively. Aluminum concentrations are high (8.2–29.1 wt.%) in some tanks (C-103, C-106, and S-112) and relatively low (<1.5 wt.%) in other tanks (C-202 and C-203). Gibbsite is a common mineral in tanks with high Al concentrations, while non-crystalline U–Na–C–O–P ± H phases are common in the U-rich residual wastes from tanks C-202 and C-203. Iron oxides/hydroxides have been identified in all residual waste samples studied to date. Contaminant release from the residual wastes was studied by conducting batch leach tests using distilled deionized water, a Ca(OH)₂-saturated solution, or a CaCO₃-saturated water. Uranium release concentrations are highly dependent on waste and leachant compositions with dissolved U concentrations one or two orders of magnitude higher in the tests with high U residual wastes, and also higher when leached with the CaCO₃-saturated solution than with the Ca(OH)₂-saturated solution. Technetium leachability is not as strongly dependent on the concentration of Tc in the waste, and it appears to be slightly more leachable by the Ca(OH)₂-saturated solution than by the CaCO₃-saturated solution. In general, Tc is much less leachable (<10 wt.% of the available mass in the waste) than previously predicted. This may be due to the coprecipitation of trace concentrations of Tc in relatively insoluble phases such as Fe oxide/hydroxide solids.     

Improved Resolution of Ambient Flow through Fractured Rock with Temperature Logs

In contaminant hydrogeology, investigations at fractured rock sites are typically undertaken to improve understanding of the fracture networks and associated groundwater flow that govern past and/or future contaminant transport. Conventional hydrogeologic, geophysical, and hydrophysical techniques used to develop a conceptual model are often implemented in open boreholes under conditions of cross-connected flow. A new approach using high-resolution temperature (±0.001°C) profiles measured within static water columns of boreholes sealed using continuous, water-inflated, flexible liners (FLUTe™) identifies hydraulically active fractures under ambient (natural) groundwater flow conditions. The value of this approach is assessed by comparisons of temperature profiles from holes (100 to 200 m deep) with and without liners at four contaminated sites with distinctly different hydrogeologic conditions. The results from the lined holes consistently show many more hydraulically active fractures than the open-hole profiles, in which the influence of vertical flow through the borehole between a few fractures masks important intermediary flow zones. Temperature measurements in temporarily sealed boreholes not only improve the sensitivity and accuracy of identifying hydraulically active fractures under ambient conditions but also offer new insights regarding previously unresolvable flow distributions in fractured rock systems, while leaving the borehole available for other forms of testing and monitoring device installation.