Oil and Gas Potential of Deep- and Ultradeep-Water Zones of Continental Margins

Oil- and gas-bearing basins of the World Ocean spreading to the continental shelf and foothill are considered. Large hydrocarbon resources, including oil pools have been discovered in the deep-water basins. The basins are confined to passive continental margins and characterized by the common mechanism of formation. Oil and gas (hereafter, petroleum) generation and accumulation are dictated by the optimum specifics of source and reservoir rocks accumulated under favorable conditions of rifts and deep-sea fans. Halokinesis played an important role in the formation of traps and migration of hydrocarbons. The global experience shows that the northern, eastern, and southern shelves of the Russian seas, as well as their continental slopes and foothills, have a big petroleum potential.     

A quantitative, three-dimensional depositional model of gravelly braided rivers

A quantitative, three‐dimensional depositional model of gravelly, braided rivers has been developed based largely on the deposits of the Sagavanirktok River in northern Alaska. These deposits were described using cores, wireline logs, trenches and ground‐penetrating radar profiles. The origin of the deposits was inferred from observations of: (1) channel and bar formation and migration and channel filling, interpreted from aerial photographs; (2) water flow during floods; and (3) the topography and texture of the river bed at low‐flow stage. This depositional model quantitatively represents the geometry of the different scales of strataset, the spatial relationships among them and their sediment texture distribution. Porosity and permeability in the model are related to sediment texture. The geometry of a particular type and scale of strataset is related to the geometry and migration of the bedform type (e.g. ripples, dunes, bedload sheets, bars) associated with deposition of the strataset. In particular, the length‐to‐thickness ratio of stratasets is similar to the wavelength‐to‐height ratio of associated bedforms. Furthermore, the wavelength and height of bedforms such as dunes and bars are related to channel depth and width. Therefore, the thickness of a particular scale of strataset (i.e. medium‐scale cross‐sets and large‐scale sets of inclined strata) will vary with river dimensions. These relationships between the dimensions of stratasets, bedforms and channels mean that this depositional model can be applied to other gravelly fluvial deposits. The depositional model can be used to interpret the origin of ancient gravelly fluvial deposits and to aid in the characterization of gravelly fluvial aquifers and hydrocarbon reservoirs.     

Evolution and deposits of a gravelly braid bar, Sagavanirktok River, Alaska

The evolution, migration and deposits of a gravelly braid bar in the Sagavanirktok River, northern Alaska, are described in unprecedented detail using annual aerial photographs, ground‐penetrating radar (GPR) profiles, trenches and cores. Compound braid bars in the Sagavanirktok River form by chute cut‐off of point bars and by growth of mid‐channel unit bars. Subsequent growth is primarily by accretion of unit bars onto their lateral and downstream margins. The upstream ends of braid bars may be sites of erosion or unit bar deposition. Compound braid bar deposits vary in thickness laterally and are thickest in medial sections and near cut banks. Compound bar deposits are typically composed of three to seven sets of simple large‐scale inclined strata, each simple set formed by a unit bar. The simple large‐scale strata contain medium‐scale cross‐strata (from dune migration) and planar strata (from migration of bedload sheets). The upstream and medial parts of compound braid bar deposits show very little vertical variation in grain size, but downstream and lateral margins tend to fine upwards. The deposits are mostly poorly sorted sands and gravels, although sands tend to be deposited at the top of the braid bar, and open‐framework gravels preferentially occur near the top and base of the braid bar. The patterns of braid bar growth and migration, and the nature of the deposits, described from the Sagavanirktok River are generally similar to other sandy and gravelly braided rivers, and consistent with the theoretical braid bar model of Bridge (1993).     

The 1.80–1.74-Ga gabbro–anorthosite–rapakivi Korosten Pluton in the Ukrainian Shield: a 3-D geophysical reconstruction of deep structure

The deep structure of the gabbro–anorthosite–rapakivi granite (“AMCG-type”) Korosten Pluton (KP) in the northwestern Ukrainian Shield was studied by 3-D modelling of the gravity and magnetic fields together with previous seismic data. The KP occupies an area of ca. 12,500 km² and comprises several layered gabbro-anorthositic intrusions enveloped by large volumes of rapakivi-type granitoids. Between 1.80 and 1.74 Ga, the emplacement of mafic and associated granitoid melts took place in several pulses. The 3-D geophysical reconstruction included: (a) modelling of the density distribution in the crust using the observed Bouguer anomaly field constrained by seismic data on Moho depth, and (b) modelling of the magnetic anomaly field in order to outline rock domains of various magnetisation, size and shape in the upper and lower crust. The density modelling was referred to three depth levels of 0 to 5, 5 to 18, and 18 km to Moho, respectively. The 3-D reconstruction demonstrates close links between the subsurface geology of the KP and the structure of the lower crust. The existence of a non-magnetic body with anomalously high seismic velocity and density is documented. Most plausibly, it represents a gabbroic stock (a parent magma chamber) with a vertical extent of ca. 20 km, penetrating the entire lower crust. This stock has a half-cylindrical shape and a diameter of ca. 90 km. It appears to be connected with a crust–mantle transitional lens previously discovered by EUROBRIDGE seismic profiling. The position of the stock relative to the subsurface outlines of the KP is somewhat asymmetric. This may be due to a connection between the magmatism and sets of opposite-dipping faults initially developed during late Palaeoproterozoic collisional deformation in the Sarmatian crustal segment. Continuing movements and disturbances of the upper mantle and the lower crust during post-collisional tectonic events between 1.80 and 1.74 Ga may account for the long-lived, recurrent AMCG magmatism.     

Blast Induced Damage and Dynamic Behaviour of Hangingwalls in Bench Stoping

This paper presents the results of a comprehensive monitoring program designed to investigate the extent of blast induced damage experienced by rock masses extracted by bench stoping methods. An array of triaxial geophones and extensometers were used to monitor blast vibration attenuation and measure hangingwall deformations during stope extraction. In addition, pre and post surveys of the hangingwall rock mass were conducted using a TV borehole camera and cavity survey instrumentation. These surveys were later used to calibrate damage profiles into the stope hangingwalls.

Peak particle velocity, hangingwall deformation measurements and stope surveys were used to develop a site specific damage model that allowed engineers to asses drilling and blasting configurations to minimise the extent of pre-conditioning and damage. In addition the study included the analysis of the frequency response, displacements and accelerations experienced by the excavation as extraction and mine filling progressed. This work aimed at improving our understanding of the influence of blasting on the dynamic behaviour of stope hangingwalls.

The study demonstrated that estimates of the maximum extent of rock mass pre-conditioning and/or damage made through the application of the Holmberg-Persson approach compared well with measured results. In addition, the study found that dynamic loading imparted on an exposed hangingwall from subsequent stope blasting was also expected to contribute to rock mass weakening and that mine filling was crucial to arrest further deterioration. Hangingwall accelerations were used to demonstrate that larger openings may be more susceptible to dynamic loading.     

Active faulting at the Eurasian, North American and Pacific plates junction

The active faults known and inferred in the area where the major Pacific, North American and Eurasian plates come together group into two belts. One of them comprises the faults striking roughly parallel to the Pacific ocean margin. The extreme members of the belt are the longitudinal faults of islands arcs, in its oceanic flank, and the faults along the continental margins of marginal seas, in its continental flank. The available data show that all these faults move with some strike-slip component, which is always right-lateral. We suggest that characteristic right-lateral, either partially or dominantly, kinematics of the fault movements has its source in oblique convergence of the Pacific plate with continental Eurasian and North American plates. The second belt of active faults transverses the extreme northeast Asia as a continental extension of the active mid-Arctic spreading ridge. The two active fault belts do not cross but come close to each other at the northern margin of the Sea of Okhotsk marking thus the point where the Pacific, North American and Eurasian plates meet.     

Pollution history and recovery of a boreal lake exposed to a heavy bleached pulping effluent load

We examined the effects of heavy pulp mill discharges on the Lake Lievestuoreenjärvi ecosystem and the later recovery of diatom and chironomid communities from age-dated short core samples. Beginning in 1927 the lake received a heavy effluent load from a sulphite pulp mill. Except for the recession during the Second World War and the temporary closure of the mill from 1967 to 1971, the industrial load, containing large quantities of nutrients, organic matter and toxic compounds, increased continuously. In the early 1980s, laboratory documents were falsified by the directors of the mill and the systematic illegal effluent overload led to a collapse of the whole lake ecosystem. In 1985, the outdated plant was finally closed down. Based on the assessment of chemical properties and biological remains of the sediment, we distinguished five developmental phases in the ecological state of the lake. In the pre-industrial phase, the pelagic and profundal benthic communities were dominated by species preferring ultraoligotrophic or oligotrophic lakes. Concomitant with the increasing discharge and deposition of chlorine compounds, resin acids, and mercury, as well as strong acidity and hypolimnetic and epilimnetic anoxia, the ecological status changed in a short period from excellent to bad. Finally, in the early 1960s, the majority of the lake was virtually dead and the aquatic life survived only in the uppermost littoral zone. Since 1985, a fast recovery in the water quality has led to a strong, but temporary eutrophy in pelagic communities. The main peak of eutrophication was caused by the invasion of a species new to the lake,Aulacoseira granulata var.angustissima. Later, the pelagic communities shifted towards oligotrophy, but the original, pre-industrial status has not been re-established. The profundal benthic communities have not achieved the pre-industrial structure, but at present indicate mesotrophy.     

A macroscale analysis of coastal steepening around the coast of England and Wales

Coastal steepening potentially presents an array of management issues in the form of financial implications of sea defence degradation, increased risk posed to the hinterland as wave attenuation is reduced, 'coastal squeeze' and statutory requirements in the light of the Habitats Directive. The extent to which coastal steepening has occurred throughout England and Wales has been investigated through use of a GIS and dataset based on historical Ordnance Survey map information. Data were collected along 1084 selected profile lines, positioned so as to be geomorphologically representative of the coast. Features recorded from each map year included the positions of mean high water (MHW) and mean low water (MLW), the relative movements of which infer changing intertidal gradients. The results presented in this paper are on a subject and scale not previously published. It is revealed that 61% of the coastline studied has experienced a tendency towards steepening. Of the remainder, 33% has flattened, and 6% has experienced no rotational movement. This tendency towards steepening has been the dominant movement on each of the west, south, and east coasts.