Quantitative distribution of meiobenthos in deep-water zones of the World Ocean

An analysis of published and original data on the meiobenthos abundance in the depth interval from 100 to 9807 m (in total, 665 records, 445 of them obtained for depths exceeding 1000 m) revealed general regularities in its distribution. The influence of the sampling and data processing methods on the quantitative estimates of the meiobenthos abundance is considered to demonstrate changes in the proportions of the main meiobenthic taxa at different depths and to characterize latitudinal changes in the meiobenthos abundance. The dependence of the abundance of free-living nematodes, the most abundant group of metazoan meiobenthos, on trophic conditions is analyzed. No significant differences in the meiobenthos abundance in the samples obtained by box-and multicorers are established. It is shown that the share of nematodes in metazoan meiobenthos communities increases with the depth. In temperate latitudes, a distinct maximum in the population density confined to depths exceeding 1 km is observed. The quantitative distribution of the meiobenthos at the depths gradient is controlled by the bottom macrotopography and trophic conditions.     

Tank wall effects on broadside current forces on barge models

Three different barge sizes were tested in uniform current in a tank of limited width. One of the barges was tested with and without bilge keels. Tests were conducted in both deep and shallow water. The barges were placed broadside to the current flow and the lateral forces on the barges were measured. The effect of the tank walls on these forces is clearly shown.     

Cross-shelf exchange in a model of the Ross Sea circulation and biogeochemistry

Transport of warm, nutrient-rich Circumpolar Deep Water (CDW) onto Antarctic continental shelves and coastal seas has important effects on physical and biological processes. The present study investigates the locations of this transport and its dynamics in the Ross Sea with a high-resolution three-dimensional numerical model. The model circulation is forced by daily wind stress along with heat and salt fluxes calculated from atmospheric climatologies by bulk formulae. All surface fluxes are modified by an imposed climatological ice cover. Waters under the Ross Ice Shelf are not included explicitly, but their effect on temperature and salinity is imposed in a buffer zone at the southern end of the model domain. A simple nutrient uptake is calculated based on the climatological chlorophyll distribution and Monod uptake kinetics.Model circulation is strongly affected by bottom topography, due to weak stratification, and agrees with schematics of the general flow and long-term current measurements except near the southern boundary. The sea-surface temperature is similar to satellite estimates except that the warmest simulated temperatures are slightly higher than observations. There is a significant correlation between the curvature of the shelf break and the transport across the shelf break. A momentum term balance shows that momentum advection helps to force flow across the shelf break in specific locations due to the curvature of the bathymetry (that is, the isobaths curve in front of the flow). For the model to create a strong intrusion of CDW onto the shelf, it appears two mechanisms are necessary. First, CDW is driven onto the shelf at least partially due to momentum advection and the curvature of the shelf break; then, the general circulation on the shelf takes the CDW into the interior.     

Design and projected performance of a flapping foil AUV

The design and construction of a biomimetic flapping foil autonomous underwater vehicle is detailed. The vehicle was designed as a proof of concept for the use of oscillating foils as the sole source of motive power for a cruising and hovering underwater vehicle. Primary vehicle design requirements included scalability and flexibility in terms of the number and placement of foils, so as to maximize experimental functionality. This goal was met by designing an independent self-contained module to house each foil, requiring only direct current power and a connection to the vehicle's Ethernet local area network for operation. The results of tests on the foil modules in the Massachusetts Institute of Technology (MIT) Marine Hydrodynamics Water Tunnel and the MIT Ship Model Testing Tank are both used to demonstrate fundamental properties of flapping foils and to predict the performance of the specific vehicle design based on the limits of the actuators. The maximum speed of the vehicle is estimated based on the limitations of the specific actuator and is shown to be a strong function of the vehicle drag coefficient. When using four foils, the maximum speed increases from 1 m/s with a vehicle C/sub D/ of 1.4 to 2 m/s when C/sub D/=0.1, where C/sub D/ is based on vehicle frontal area. Finally, issues of vehicle control are considered, including the decoupling of speed and pitch control using pitch-biased maneuvering and the tradeoff between actuator bandwidth and authority during both the cruising and hovering operation.     

Boussinesq-type modelling using an unstructured finite element technique

A model for solving the two-dimensional enhanced Boussinesq equations is presented. The model equations are discretised in space using an unstructured finite element technique. The standard Galerkin method with mixed interpolation is applied. The time discretisation is performed using an explicit three-step Taylor–Galerkin method. The model is extended to the surf and swash zone by inclusion of wave breaking and a moving boundary at the shoreline. Breaking is treated by an existing surface roller model, but a new procedure for the detection of the roller thickness is devised. The model is verified using four test cases and the results are compared with experimental data and results from an existing finite difference Boussinesq model.     

Second-order drift force response of offshore guyed towers

An iterative frequency domain method of analysis is presented for determining the response behaviour of Guyed Offshore Towers to low-frequency, second-order wave drift forces generated in a random sea environment. For the response analysis, the tower is idealized as a shear beam with a rotational spring at the bottom support. The guylines are replaced by a non-linear spring. The second-order drift force is considered to be proportional to the square of the wave elevation and is simulated using a drift force coefficient and the time history of a slowly varying wave envelope in random sea. The responses due to drift forces are obtained in frequency domain by incorporating the non-linearities produced due to non-linear guy lines. An example problem is solved under different random sea states to compare the response behaviour of the tower obtained by the second-order wave force, the first-order wave force and a combination of the two.     

On the vertical distribution of

The aim of this paper is to present an analytical expression for the vertical distribution of the correlation between the horizontal ( ) and vertical ( ) wave velocity components. This quantity, , which appears explicitly in the time-averaged momentum balance equations, has been shown to play an important role in the vertical distribution of wave-induced currents.The proposed formulation for is based on an identity that relates the effective (wave) shear stress to the effective (wave) normal stresses ( ² and ²) and to the vorticity of the oscillatory flow gw. This general expression has been applied to simplified situations and has been shown to degenerate into other existing formulations with comparable simplifying assumptions, viz. irrotational waves in shallow water over an arbitrary bottom topography and breaking waves over a horizontal bottom.The model has also been applied to the case of waves interacting with a depth-varying current over a horizontal bottom, in which preliminary results have been obtained for a simplified situation invoking linear (small-amplitude) wave theory.