Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

关于波浪Boussinesq方程的研究

对有关波浪 Boussinesq方程的研究成果进行了系统的归纳总结和评述 ,以期对本学科的发展起到一定的引导和促进作用     

生物制氢研究进展

目前, 世界上利用的能源90%以上都是“化石能源”(如石油、煤炭和天然气等)。随着人类不断利用这些不可再生的“化石能源”, 它将会逐渐枯竭, 且其燃烧形成的产物(如CO2和SO2等)造成的严重环境污染(如温室效应和酸雨), 也有害于人类健康。因此, 人类正面临着能源紧缺和环境污染的双重压力。为满足能源需求量日益增长和环境保护的需要, 我们必须寻找环保型的可再生能源来替代“化石能源” 以满足人类对能源的需求。 在各种可再生能源中氢能将有可能替代“化石能源”,成为未来能源利用的主要形式。氢能具有许多优点:①氢能燃烧时只生成水, 不产生任何污染物, 甚至连CO2也不会产生, 实现真正的“零污染” 和“零排放”;②氢能的能量密度高, 放热高达122 kJ/g, 是焦炭放热的4.5倍, 汽油的2.68倍;③氢能可经济有效的输送和储存, 可以利用已有的天然气管道输送, 输送成本低, 甚至优于输电, 因为输送氢能不会产生如电能输送过程中所产生的能量损耗;氢能的存储也比较简便, 其中储氢合金材料就是一种非常理想的储氢方法, 该方法储氢能力强、运输方便、操作容易, 且安全可靠。在利用储氢合金进行储氢时, 还可用以进行制冷或采暖(Kulkova et al., 2006), 因为储氢材料在吸氢时放热, 在放氢时吸热。正因为氢能具有如此多的优点, 许多大的跨国公司开始对制氢技术高度关注, 如主要汽车制造商(通用、福特、戴姆勒-克莱斯勒等)对开发以氢能作为燃料的汽车投入大量的人力和物力;宝马公司从20世纪70年代就开始研制以氢能为能源的汽车, 宝马公司现在已拥有了时速达240km的氢能汽车(Munro,2003)。同时, 一些发达国家的科研院所的科学家们对氢能的制备方法、制氢机制以及提高产氢量等进行了大量的研究。     

Optimization Mathematical Model of Pile Forces for Offshore Piled Breasting Dolphins

An optimization mathematical model of the pile forces for piled breasting dolphins in the open sea under various loading conditions is presented. The optimum layout with the well distributed pile forces and the least number of piles is achieved by the multiplier penalty function method. Several engineering cases have been calculated and compared with the result of the conventional design method. It is shown that the number of piles can be reduced at least by 10%—20% and the piles‘ bearing state is improved greatly.     

Underice Operation of SJT-5 ROV

- The authors have used a low-cost ROV of observation type for underice surveying of the Nen-Jiang Cross-river oil pipe line in the Da Qing oil field. The operation method, process and the safety measures for severe cold areas are presented. The fruitful tries and experience may be useful to ROV operators in severe cold areas.     

Immediate profile and planform evolution of a beach nourishment project with hurricane influences

In this study, planform adjustment began during a period of calm weather immediately after nourishment and then the passage of one strong storm caused a substantial portion of the total profile equilibration. Weekly beach profiles, shoreline surveys, and nearshore wave measurements were conducted before, during, and immediately after construction of the 1100-m long Upham Beach nourishment project on the low-energy, west coast of Florida. This project was constructed in three segments: the wide north segment, the central segment, and the narrow south segment. With the exception of the relatively distant passage of Hurricane Charley, calm weather prevailed for 45 days following completion of the south and central segments. Construction of the wide north segment was completed on August 27, 2004. Substantial planform diffusion occurred prior to construction completion via formation of a 300-m long spit extending from the wide north segment. The shoreline orientation was changed abruptly due to this diffusion spit formation, as opposed to the gradual adjustment predicted by most long-term models. Planform adjustment was initiated prior to profile equilibration, and it did not require high-energy conditions. A simple vector sum model for determining the orientation of a potential diffusion spit was developed. This study recommends designing end transitions at the predicted diffusion spit orientation to avoid post-nourishment spit formation during future projects.     

关于修改港工钢筋混凝土规范小偏心受压构件正截面强度计算的建议

本文提出在小偏心受压构件正截面强度计算中，取消弯曲抗压强度ｆｃｍ（Ｒｗ），采用轴心抗压强度ｆｃ，这与构件的实际破坏形态相符。对小偏心受压构件正截面强度计算提出了设计建议。特别是对工程上大量应用的矩形截面对称配筋小偏压构件提示了简捷的设计方法，与以往的近似计算方法相比具有物理概念明确，精度高，方法简捷的特点。     

渤海风暴潮的初步探讨

根据山东渤海沿岸各县县志记载的不完全统计,自汉朝初元(公元前48年)至民国27年(公元1938),渤海南部沿海发生的特大潮灾有79次之多(见表1)。其中特大潮灾如唐朝高宗上元三年(公元676年)八月,“青州大风,海溢,漂民五千余家,齐淄等七州大水”;明朝万历四十一年(公元1613年)七月,“海水溢逾百余里,坏民舍无算”。再如1938年8月31日,台风由青岛登陆,横断山东半岛西部(见图1),晚间抵达黄河口,逐渐停滯减弱,变成一个低气压。这次台风不仅在青岛造成严重灾情,整个渤海沿岸都深受其害,并且出现了历史最高水位。解放后,渤海又多次受到强风暴潮的危害。历史资料表明,渤海的菜州湾和渤海湾地区是风暴潮的多发区和严重区,这种潮灾大都出现于春秋过渡季节和盛夏台风频繁活动季节。 近几年来,国内对渤海局部地区风暴潮的研究已有许多论述,但大都是对冷锋所导致的单站风暴潮的研究,对台风潮的研究则较少。本文试图对冷锋和台风两种灾害性天气所导致的整个渤海风暴潮的一些现象作一较全面的讨论,并对其一些基本特性作一理论分析。     

高速摄影对散体振动的研究

以现代高速摄影技术和图像分析以及数据处理方法，针对高效振动磨机中弹性散体工质（如钢棒、球体等）的振动力学进行了深入的探讨和分析，为研究散体动力学和振动超细粉碎过程中的能量分布和传递规律以及能量与物质的相互转换机理奠定了基础，也为相关学科的发展提供了一种可以借鉴的方法。     

Variational iteration solving method for El Nio phenomenon atmospheric physics of nonlinear model

1 IntroductionThe El Ni’o atmospheric physics oscillation is anabnormal phenomenon involved in the tropical Pacificocean- atmosphere interactions. Studies on the El Ni(ophenomenon are very attractive (Lin et al., 2000; Linet al., 2001, 2002; Wang, 2001; Feng et al., 2001;Feng et al., 2002; Liu et al., 2002; Wei and Chen,2003; Xie et al., 2002; Zhu et al., 2002; Pu et al.,2003; Gu et al., 2004; Yu and Liu, 2004). Lin and Mo(2004), Mo and Lin (2004) and Mo et al. (2004) alsostudied a s…