黄河入海泥沙对渤海和黄海沉积作用的影响

渤海平均水深18m，最大水深70m，是一个较浅的海湾。黄海平均水深38m，其中部为水深大于50m的盆地。它们的共同特征是陆地环绕。沿岸河流输沙特征对沉积作用过程有重大影响，特别是黄河入海泥沙的影响尤为显著。 关于黄河人海泥沙对渤海和黄海沉积作用的影响，前人已从不同角度进行过讨论。黄河是世界上著名的多沙性河流。由于黄河尾闾长期以来不断发生变迁，纵横摆动于华北平原之上，交替注入渤海和黄海，因此，在讨论黄河入海泥沙在中国近海沉积中的作用时，必须把渤海和黄海作为一个整体，甚至南涉东海。本文试图在以往工作的基础上，概括讨论黄河入海泥沙对渤海和黄海海底沉积作用的影响。     

人造海洋涌升流和海洋渔场

针对渔业资源日趋减少和鱼产品需求不断增加的矛盾，探讨了建造海底山脉、人工制造海洋涌升流、从而人工制造优良海洋渔场的可行性，分析了我国建造海底山脉的水深、海底和海流条件。介绍了建造海底山脉的建筑方法和国际上建造海底山脉的最新动态。论述了我国在200n mile以内建造海底山脉的有利条件。     

Molecular identification of bloom-forming species Phaeocystis globosa (Pryninesiophyta) and its dispersal based on rDNA ITS sequence analysis

The colony-forming Phaeocystis species are causative agents of dense bloom occurrences in coastal waters worldwide. It is difficult to separate them because of the different morphologies associated with their colonial stages. In this study we applied molecular approaches to analyze the genetic variation of Phaeocystis globosa and Phaeocystis pouchetii from several geographic regions, and to assist in tracing the dispersal of bloom-forming Phaeocystis species in coastal waters of China. The sequences of the internal transcribed spacers (ITS1 and ITS2) of rDNA and the 5.8S ribosomal RNA gene of Phaeocystis strains were determined. Sequence comparison shows that P.globosa was the most divergent to P. pouchetii, exhibiting sequence divergence higher than 0.08. However, lower genetic divergences existed between strains of P.globosa. The sequence comparison of the Phaeocystis rDNA ITS clearly shows that the species isolated from the southeast coast of China is identified as P.globosa rather than P. cf. pouchetii or other species. Furthermore, the significance of rDNA variation in distinct global populations of P.globosa suggested it might have had sufficient time to accumulate detectable mutations at the rDNA locus, supporting the hypothesis of ancient dispersal of P.globosa to many areas, meaning that P.globosa blooms in the coastal waters of China are endemic rather than a newly introduced species or a foreign source. Finally, based on the high divergent region of rDNA ITS, a pair of species-specific primers for P.globosa were designed, they could be useful to detect the presence of this species in mixed plankton assemblages or flagellate stages that are recognized with diffculties by means of conventional microscopy.     

海上油井密封套管内海水冻胀特性试验分析

1998年首次进行了海上油井密封套管内海水冻胀特性模拟试验,建立了一套各种参数的测量系统.文中介绍了管内海水冻结过程、海水过冷温度、结冰水温、轴向冻胀力以及管体应变测量结果.     

关于波浪Boussinesq方程的研究

对有关波浪 Boussinesq方程的研究成果进行了系统的归纳总结和评述 ,以期对本学科的发展起到一定的引导和促进作用     

Measurement of nuclides of uranium and thorium series of disequilibrium using γ-spectroscopy

ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｒａｄｉｏｎｕｃｌｉｄｅｓｏｆｎａｔｕｒａｌｕｒａｎｉｕｍａｎｄｔｈｏｒｉｕｍｓｅｒｉｅｓｃａｎｂｅｕｓｅｄｔｏｔｒａｃｅｍａｒｉｎｅｐｒｏ ｃｅｓｓｏｆｖａｒｉｏｕｓｔｅｍｐｏｒａｌａｎｄｓｐａｔｉａｌｓｃａｌｅａｎｄｐｒｏｐｅｒｔｉｅｓｔｈａｔｐｒｏｖｉｄｅｐｌｅｎｔｉｆｕｌｉｎｆｏｒｍａｔｉｏｎａｂｏｕｔｐｈｙｓｉｃｓ,ｃｈｅｍｉｓｔｒｙ ,ｇｅｏｓｃｉｅｎｃｅａｎｄｂｉｏｌｏｇｙｏｆｏｃｅａｎｂｅｃａｕｓｅｔｈｅｙｈａｖｅｄｉｆｆｅｒｅｎｔｃｈｅｍｉｃａｌｐｒｏ…     

褐牙鲆(♀)、夏鲆(♂)及其杂交子一代线粒体16S rDNA序列遗传特性的初步研究

以线粒体16S rRNA基因部分片段为代表研究雌褐牙鲆Paralichthys olivaceus、雄夏鲆P. dentatus及其杂交子一代间线粒体DNA的遗传特性。母本与父本序列差异较大,属种间差异,在590个位点中有28个变异位点,而且全部为简约信息位点。使用同一对引物扩增亲本与杂交子代,在杂交子代中未检测到父本的线粒体DNA类型,11个处于两种生长阶段的杂交样本仅检测到一种单倍型,而且与母本的一个单倍型为同一种,表明褐牙鲆与夏鲆杂交线粒体DNA遵循母系遗传规律。     

Estimation of Rapidly Time-Varying Sparse Channels

The estimation of sparse shallow-water acoustic communication channels and the impact of estimation performance on the equalization of phase coherent communication signals are investigated. Given sufficiently wide transmission bandwidth, the impulse response of the shallow-water acoustic channel is often sparse as the multipath arrivals become resolvable. In the presence of significant surface waves, the multipath arrivals associated with surface scattering fluctuate rapidly over time, in the sense that the complex gain, the arrival time, and the Dopplers of each arrival all change dynamically. A sparse channel estimation technique is developed based on the delay-Doppler-spread function representation of the channel. The delay-Doppler-spread function may be considered as a first-order approximation to the rapidly time-varying channel in which each channel component is associated with Doppler shifts that are assumed constant over an averaging interval. The sparse structure of the delay-Doppler-spread function is then exploited by sequentially choosing the dominant components that minimize a least squares error. The advantage of this approach is that it captures both the channel structure as well as its dynamics without the need of explicit dynamic channel modeling. As the symbols are populated with the sample Dopplers, the increase in complexity depends on the channel Doppler spread and can be significant for a severely Doppler-spread channel. Comparison is made between nonsparse recursive least squares (RLS) channel estimation, sparse channel impulse response estimation, and estimation using the proposed approach. The results are demonstrated using experimental data. In training mode, the proposed approach shows a 3-dB reduction in signal prediction error. In decision-directed mode, it improves significantly the robustness of the performance of the channel-estimate-based equalizer against rapid channel fluctuations.     

Numerical simulation of the hydrodynamic behaviour of submerged plane nets in current

The aim of this paper is to investigate the shape and tension distribution of fishing nets in current. A numerical model is developed, based on lumped mass method to simplify the net. The motion equation is set up for each lumped mass. The Runge–Kutta–Verner fifth-order and sixth-order method is used to solve these simultaneous equations, and then the displacement and tension of each lumped mass are obtained. In order to verify the validity of the numerical method, model tests have been carried out. The results by the numerical simulation agree well with the experimental data.     

Optimization Mathematical Model of Pile Forces for Offshore Piled Breasting Dolphins

An optimization mathematical model of the pile forces for piled breasting dolphins in the open sea under various loading conditions is presented. The optimum layout with the well distributed pile forces and the least number of piles is achieved by the multiplier penalty function method. Several engineering cases have been calculated and compared with the result of the conventional design method. It is shown that the number of piles can be reduced at least by 10%—20% and the piles‘ bearing state is improved greatly.