Seismic stratigraphic framework and depositional sequences in the Santos Basin,Brazil

The Santos Basin, situated offshore southern Brazil, is one of nine marginal rift basins in the equatorial South Atlantic. It formed by the collapse of a thermal dome in the late Jurassic and by subsequent rifting and opening of the South Atlantic in the early Cretaceous. Rifting was accompanied by immense volcanic outpouring seen at the surface today throughout the onshore Paraná Basin and thought to underlie the entire Santos Basin, and the adjacent São Paulo Plateau. Vulcanism was followed by subsidence of up to 10 km from Aptian to Recent time, and a coastal hingeline coincides with the Serra do Mar uplift. The basin depocentre, which is 700 km long, is bounded to the north and south by basement and volcanic highs, respectively. A restricted water circulation in the ocean basin, which prevailed up to the Santonian stage, has important repercussions for the hydrocarbon potential of the area. The nine genetically related basins have collective reserves of ≈ 5 billion barrels of oil and associated gas. A stratigraphic framework, based largely on seismic data, has been erected for the Santos Basin. Seven regional unconformities, or ‘R’ reflections, can be traced throughout the basin and form the boundaries for seismic sequences. Isopaching the seismic sequences defines the principal depositional units in the basin and also shows how the basin depocentre shifted with time. Limited well control has enabled the seismic sequences to be correlated with litho-environmental sequences which more fully reflect the geological evolution and provide a working exploration model. Finally, an attempt has been made to recognize and map seismic facies within the seismic sequences and to predict the lithofacies in areas away from well control     

Simulating sensitivity of soil moisture and evapotranspiration under heterogeneous soils and land uses

Soil moisture (SM) plays an important role in land surface and atmospheric interactions. It modifies energy balance at the surface and the rate of water cycling between the land and atmosphere. In this paper we provide a sensitivity assessment of SM and ET for heterogeneous soil physical properties and for three land uses including irrigated maize, rainfed maize, and grass at a climatological time-scale by using a water balance model. Not surprisingly, the study finds increased soil water content in the root zone throughout the year under irrigated farming. Soil water depletes to its lowest level under rainfed maize cultivation. We find a ‘land use’ effect as high as 36 percent of annual total evapotranspiration, under irrigated maize compared to rainfed maize and grass, respectively. Sensitivity analyses consisting of comparative simulations using the model show that soil characteristics, like water holding capacity, influence SM in the root zone and affect seasonal total ET estimates at the climatological time-scale. This ‘soils’ effect is smaller than the ‘land use’ effect associated with irrigation but, it is a source of consistent bias for both SM and ET estimates. The ‘climate’ effect basically masks the ‘soils’ effect under wet conditions. These results lead us to conclude that appropriate representation of land use, soils, and climate are necessary to accurately represent the water and energy balance in real landscapes.     

Cloud condensation nuclei spectra derived from size distributions and hygroscopic properties of the aerosol in coastal south-west Portugal during ACE-2

In this work we propose and test a method to calculate cloud condensation nuclei (CCN) spectra based on aerosol number size distributions and hygroscopic growth factors. Sensitivity studies show that this method can be used in a wide variety of conditions except when the aerosol consist mainly of organic compounds. One crucial step in the calculations, estimating soluble ions in an aerosol particle based on hygroscopic growth factors, is tested in an internal hygroscopic consistency study. The results show that during the second Aerosol Characterization Experiment (ACE-2) the number concentration of inorganic ions analyzed in impactor samples could be reproduced from measured growth factors within the measurement uncertainties at the measurement site in Sagres, Portugal.
CCN spectra were calculated based on data from the ACE-2 field experiment at the Sagres site. The calculations overestimate measured CCN spectra on average by approximately 30%, which is comparable to the uncertainties in measurements and calculations at supersaturations below 0.5%. The calculated CCN spectra were averaged over time periods when Sagres received clean air masses and air masses influenced by aged and recent pollution. Pollution outbreaks enhance the CCN concentrations at supersaturations near 0.2% by a factor of 3 (aged pollution) to 5 (recent pollution) compared to the clean marine background concentrations. In polluted air masses, the shape of the CCN spectra changes. The clean spectra can be approximated by a power function, whereas the polluted spectra are better approximated by an error function.     

Impact of a rock avalanche on a moraine‐dammed proglacial lake: Laguna Safuna Alta,Cordillera Blanca,Peru

Moraines that dam proglacial lakes pose an increasing hazard to communities in the Andes and other mountain ranges. The moraines are prone to failure through collapse, overtopping by lake waters or the effect of displacement waves resulting from ice and rock avalanches. Resulting floods have led to the loss of thousands of lives in the Cordillera Blanca mountains of Peru alone in the last 100 years. On 22 April 2002 a rock avalanche occurred immediately to the south‐west of Laguna Safuna Alta, in the Cordillera Blanca. The geomorphic evidence for the nature, magnitude and consequences of this event was investigated in August 2002. Field mapping indicated that the avalanche deposited 8–20 × 10⁶ m³ of rock into the lake and onto the surface of the frontal region of Glaciar Pucajirca, which flows into the lake. Repeated bathymetric surveying indicated that ～5 × 10⁶ m³ of this material was deposited directly into the lake. The immediate effect of this event was to create a displacement wave that gained in height as it travelled along the lake basin, overtopping the impounding moraine at the lake's northern end. To achieve overtopping, the maximum wave height must have been greater than 100 m. This, and subsequent seiche waves, caused extensive erosion of both the proximal and distal faces of the impounding terminal moraine. Further deep gullying of the distal face of this moraine resulted from the supply of pressurized water to the face via a relief overflow tunnel constructed in 1978. Two‐dimensional, steady‐state analysis of the stability of the post‐avalanche moraine rampart indicates that its proximal face remains susceptible to major large‐scale rotational failure. Copyright © 2005 John Wiley & Sons, Ltd.     

An investigation of engineering and environmental concerns relating to proposed highway construction in a karst terrane

The proposed realignment of a portion of US Highway 58 near Gibson Station, Lee County, Virginia, indicated significant potential impacts to Young-Fugate Cave, a listed Significant Cave. Field inspection of the site in November 1991, revealed fill for the northbound lane would extend in excess of 100 m into the Fugate blind valley and to within 40 m of the Fugate insurgence. Questions were raised about the risks involved in placing a soil fill across an active blind valley and the extent of the geotechnical investigation. The plans-contained no provisions to direct runoff of road salt or leaks and spills from accessing the Fugate insurgence and thereby endangering two species of troglobitic aquatic crustaceans and a unique troglobitic beetle known to inhabit the cave. Concerns about the distances between the roadbed and cave passages prompted a resurvey of the 1.63-km-long cave. Survey teams encountered groundwater pollution problems in the cave. While exiting the cave, two team members lagging behind another surveyor had to press against the cave walls to avoid a shower of raw sewage. Neither the lead surveyor or the team following, separated by minutes, witnessed the event. On the second field day, survey teams were driven from the cave by petroleum fumes at a second location. Subsequent surface investigations revealed a homeowner complaint of petroleum fumes in their basement and a leaking underground storage tank (LUST) site at an active service station. Tank replacement has resolved the gasoline fume complaint. The sewage inputs to the cave have yet to be located or resolved. Based on the available data at the time this paper was submitted for the Sinkhole Conference, there appeared to be on the order of 10 m between the ceiling of the stream passage and the proposed roadbed; however, unsurveyed cave passages were known to cross over the stream passage in the area where the proposed highway would cross the cave. The Virginia Cave Board is negotiating modifications to this construction proposal based on the engineering and environmental problems at this site.     

Seasonal reorganization of subglacial drainage inferred from measurements in boreholes

The effect of the formation of a major subglacial drainage channel on the behaviour of the subglacial drainage system of Haut Glacier d'Arolla, Switzerland, was investigated using measurements of borehole water level and the electrical conductivity and turbidity of basal meltwaters. Electrical conductivity profiles were also measured within borehole water columns to identify the water sources driving water level changes, and to determine patterns of water circulation in boreholes. Prior to channel formation, boreholes showed idiosyncratic and poorly coordinated behaviour. Diurnal water level fluctuations were small and driven by supraglacial/englacial water inputs, even when boreholes were connected to a subglacial drainage system. This system appeared to consist of hydraulically impermeable patches interspersed with storage spaces, and transmitted a very low water flux. Drainage reorganization, which occurred around 31 July, 1993, in response to rapidly rising meltwater and rainfall inputs, seems to have involved the creation of a connection between an incipient channel and a well-established channelized system located further down-glacier. Once a major channel existed within the area of the borehole array, borehole water level fluctuations were forced by discharge-related changes in channel water pressure, although a diversity of responses was observed. These included (i) synchronous, (ii) damped and lagged, (iii) inverse, and (iv) alternating inverse/lagged responses. Synchronous responses occurred in boreholes connected directly to the channel, while damped and lagged responses occurred in boreholes connected to it by a more resistive drainage system. Pressure variations within the channel resulted in diurnal transfer of mechanical support for the ice overburden between connected and unconnected areas of the bed, producing inverse and alternating patterns of water level response. © 1998 John Wiley & Sons, Ltd.     

Diurnal fluctuations in glacier ice deformation: Haut Glacier d'Arolla,Switzerland

Measurements of surface velocity, ice deformation (at 42 and 89% ice depth) and proglacial stream discharge were made at Haut Glacier d'Arolla, Switzerland, to determine diurnal patterns of variation in each. Data are analysed in order to understand better the relationship between hydraulically induced basal motion and glacier ice deformation over short timescales. The data suggest that hydraulically induced localized basal ‘slippery’ spots are created over diurnal cycles, causing enhanced basal motion and spatially variable glacier speed‐up. Our data indicate that daily glacier speed‐up is associated with reduced internal deformation over areas previously identified as slippery spots and increased deformation in areas located adjacent to or down‐glacier from slippery spots. We interpret this pattern in terms of a transfer of mechanical support for basal shear stress away from slippery spots to adjacent sticky areas, where the resulting stronger ice–bed coupling causes increased ice deformation near the bed. These patterns indicate that basal ice is subjected to stress regimes that are variable at a high spatial and temporal resolution. Such variations may be central to the creation of anomalous vertical velocity profiles measured above and down‐glacier of basal slippery zones, which have shown evidence for ‘plug flow’ and extrusion flow over annual timescales. Copyright © 2007 John Wiley & Sons, Ltd.     

Confined channel-levee complex development in an elongate depo-center: Deep-water Tertiary strata of the Austrian Molasse basin

A basin axial-channel belt was largely responsible for the observed distribution of coarse-grained gravity-flow deposits in the Tertiary Puchkirchen and basal Hall formations of the Molasse foreland basin in Upper Austria. Elements of this depositional system, mapped in three-dimensional (3D) seismic-reflection data, include channel-belt thalweg, mass-transport complexes, overbank wedge, overbank lobe, and tributary channel. The primary objective of this paper is to develop a comprehensive understanding of the sedimentary processes that were prevalent in the channel-belt complex through the analysis of well data, including drill cores and wireline logs, in conjunction with 3D seismic interpretations.     

Turbidite-reservoir architecture in complex foredeep-margin and wedge-top depocenters,Tertiary Molasse foreland basin system,Austria

We employ an integrated subsurface dataset, including >400 m of drill cores and three-dimensional (3D) seismic-reflection data from >530 km² of the Tertiary Molasse foreland basin system in Austria, to characterize turbidite-system architecture across structurally complex foredeep-margin and wedge-top depocenters and to interpret the influence of tectonic deformation and submarine topography on hydrocarbon-reservoir quality and distribution. Turbidite-system architecture and depositional processes were correlated with associated topographic features in order to identify zones of preferential sediment gravity-flow convergence or divergence. Zones of flow convergence facilitate flow acceleration and accumulative flow behavior, whereas zones of flow divergence facilitate deceleration and depletion. Zones of preferential flow convergence include narrow (<2 km) and steep (<20°) foredeep-margin slope channels along thrust front-segmenting tear faults, and steep, unchannelized piggyback-basin and foredeep margins (local gradients as great as 40° across piggyback-basin margins). The foredeep-margin gradient is exaggerated principally by tectonic deformation that post-dates turbidite-system development, based on a paucity of growth strata. Piggyback-basin-margin gradients are exaggerated as a result of deformation synchronous with and following turbidite-system development, judging from the presence of growth strata. Slope-channel topography facilitated the development of relatively coarse-grained, amalgamated turbidite reservoirs, whereas unchannelized basin-margin topography facilitated deposition of fine-grained, chaotic non-reservoirs. Zones of preferential flow divergence are flat (<1°), unconfined (i.e., large in comparison to sediment gravity flows) piggyback-basin floors, which facilitated the development of relatively coarse-grained, non-amalgamated, upward fining turbidite reservoirs, stratigraphically partitioned by fine-grained mass transport-complex deposits. The results of this study elucidate the influence of foredeep-margin and wedge-top tectonic deformation and topography on turbidite-system and associated reservoir character and distribution across the Molasse foreland basin system in Austria, and can be applied to oil and gas exploration in analogous, structurally complex settings.