陆相盆地沉积作用与构造作用的关系

构造作用与沉积作用两者之间的联系性和统一性正受到人们重视。陆相盆地沉积作用受构造作用的控制极为明显。沉积演化就是构造演化的反映,陆相盆地沉积作用直接反映了构造活动的特征。陆相盆地沉积作用最主要的特征是相变快和幕式沉积作用。按构造动力学背景,可将陆相盆地分为三大类型:张性盆地、压性盆地和剪性盆地。这三类盆地在沉积作用上有很大差异。     

岩溶水流方式与成矿作用关系探讨

本文通过论述管道流与扩散流两种主要岩溶水流方式的水动力、水化学特征与成矿的关系,论证水流方式在岩溶成矿作用中的重要作用。此外,通过分析两种水流的运移特点与矿床特征的关系,指出具浸染状、脉状的矿石结构构造和呈似层状、透镜状、脉状产出的矿体多与扩散流有关,具含砾纹层状、角砾状的矿石结构构造、和呈不规则状、囊状产出的矿体多与管道流有关;具不同形态矿体和不同结构构造矿石共存的矿体,则可由不同岩溶水流方式共同作用造成。      

渤海盆地现代构造应力场与强震活动

渤海位于北华北新生代裂陷盆地的东部,是一个晚第四纪形成的内陆海盆. 渤海盆地活动断裂发育,地震活动强烈,交会于渤海中部的NE向营口——潍坊断裂带北段、庙西北——黄河口——临邑断裂带及NW向北京——蓬莱断裂带是主要的活动构造带,将海区分成4个次级新构造区,成为现代应力场作用的构造基础. 综合研究38个震源机制解和75个井区应力场等资料,以及构造应力场二维数值模拟计算结果表明,渤海及其邻区现代构造应力场的压应力方向为NE60～90,张应力为SN——NW30;以水平和近水平应力作用为主;不同构造区主应力方向存在一定的差异. 现今渤海地区地壳发育以NNE——NE和NW——WNW走向的共轭剪切破裂为特征,是控制地震活动的主要构造.     

湖南涟源凹陷构造演化与油气成藏研究

涟源凹陷经历了2个主要构造演化阶段:晚古生代海相碳酸盐岩夹碎屑岩盖层建造和中生代陆相沉积,现今的逆掩冲断构造样式和构造格局基本定型于燕山期。油气藏的形成经历了早、晚两期,早期形成于印支运动主幕,燕山运动主幕遭到破坏,部分经重新分配后形成次生气藏;晚期形成于燕山运动主幕以后,属原生油气藏。涟源凹陷中部褶断带的紧闭背斜是寻找次生气藏的首选区域,而宽缓向斜中的隐伏隆起则是寻找晚期原生油气藏的靶区。     

海水温度对衰亡期浒苔释放生源硫影响的模拟研究

为研究浒苔释放生源硫的特征,本文对采集于黄海绿潮中期和末期的浒苔进行了实验室模拟培养,探讨了不同温度对衰亡期浒苔释放生源硫化物的影响。实验结果表明,在10~25℃温度范围内,温度升高能够加速浒苔的衰亡。二甲基硫（DMS）的平均释放速率范围为2.79~150.70 nmol/（L·g·d）,二甲基硫基丙酸内盐（DMSP）的平均释放速率范围为2.16~113.26 nmol/（L·g·d）。温度升高能够使DMS和DMSP的释放速率加快,释放量增加,DMS最大平均释放速率在25℃条件下比10℃条件下升高了约60%,培养液中DMS浓度升高了2~3倍。采集于绿潮末期的浒苔培养液中的DMS和DMSP和采集于绿潮中期的浒苔相比,浓度有所增加,采集于浒苔绿潮末期浒苔培养液中DMS的最高平均浓度为418.41 nmol/L,约为中期的4倍;DMSP的最高平均浓度为316.14 nmol/L,是中期的3倍。浒苔绿潮的爆发会对水体中的硫体系循环产生影响,进而影响该海域生态环境。     

Klukiopsis jurassica—A new Jurassic schizaeaceous fern from China

A new Jurassic schizaeaceous fernKlukiopsis jurassica gen. et sp. nov. from Yima, Henan Province, China is described. The new fern is characterized by the abaxial sori arranged in two rows, apical and complete annulus and more than 800 smooth trilete spores in each sorus.     

长白山天池火山区电性结构和岩浆系统

在长白山火山区及其附近 ,沿 5条伞状测线和 1条北西向测线进行了 6 1个大地电磁测深点的观测。用Robust等方法对观测资料进行了处理 ;应用阻抗张量分解方法消除了局部不均匀体的影响 ;计算了反映地下横向不均匀性的地磁感应矢量。利用RRI二维自动反演等技术对资料进行了解释。结果表明 :在近地表存在低阻体 ,并分别与长白山天池水体、聚龙泉温泉、锦江温泉及长白山山门附近的地下水相对应。在长白山天池及其以北和以东地区 ,约 12km深处存在电阻率很低的地质体 ,电阻率为 10到几十Ω·m ,可能是地壳岩浆囊。在测区范围内 ,地壳电性结构在南北方向存在着明显的横向变化 ,而东西方向相对均匀 ,变化比较平缓     

A dissection of the surface temperature biases in the Community Earth System Model

Based upon the climate feedback-responses analysis method, a quantitative attribution analysis is conducted for the annual-mean surface temperature biases in the Community Earth System Model version 1 (CESM1). Surface temperature biases are decomposed into partial temperature biases associated with model biases in albedo, water vapor, cloud, sensible/latent heat flux, surface dynamics, and atmospheric dynamics. A globally-averaged cold bias of ?1.22 K in CESM1 is largely attributable to albedo bias that accounts for approximately ?0.80 K. Over land, albedo bias contributes ?1.20 K to the averaged cold bias of ?1.45 K. The cold bias over ocean, on the other hand, results from multiple factors including albedo, cloud, oceanic dynamics, and atmospheric dynamics. Bias in the model representation of oceanic dynamics is the primary cause of cold (warm) biases in the Northern (Southern) Hemisphere oceans while surface latent heat flux over oceans always acts to compensate for the overall temperature biases. Albedo bias resulted from the model’s simulation of snow cover and sea ice is the main contributor to temperature biases over high-latitude lands and the Arctic and Antarctic region. Longwave effect of water vapor is responsible for an overall warm (cold) bias in the subtropics (tropics) due to an overestimate (underestimate) of specific humidity in the region. Cloud forcing of temperature biases exhibits large regional variations and the model bias in the simulated ocean mixed layer depth is a key contributor to the partial sea surface temperature biases associated with oceanic dynamics. On a global scale, biases in the model representation of radiative processes account more for surface temperature biases compared to non-radiative, dynamical processes.     

福建省南平红桃山滑坡变形活动特征及防治措施

红桃山滑坡位于南平市延平区闽江岸边,2009年7月～2010年6月,经历了4次罕见的特大暴雨,过程降雨量为200～400mm,强降雨诱发了红桃山斜坡4次变形活动,最终形成中型滑坡。由于预报准确及时,避免了重大人员伤亡发生。滑坡处于闽江上游侵蚀岸边,特殊的地形(地貌)、岩土体特征及丰富的地下水活动是滑坡产生的内因,人类工程活动开挖坡脚、坡顶加载及强降雨作用是诱发滑坡的主要外因。针对滑坡变形活动特征及稳定性分析,采取了排水、削方减载、支护等综合工程治理措施,获得了较好的治理效果。     

Evolution and spatial patterns of spheres of urban influence in China

This article presents the findings of a study of the spheres of urban influence with regard to all cities in China（not including Hong Kong,Macau and Taiwan Province of China）in the years 1990,2000 and 2009.An optimized gravity model with comprehensive time distance was used to carry out a detailed analysis of the spatial patterns of Chinese spheres of urban influence and the spatial characteristics of urban agglomerations.Such urban agglomerations are characterized by high density population and a developed economy,which are also considered as the national competition unit.This paper initially identifies four spatial patterns of urban agglomerations based on the spatial layout of city groups during their evolution.Some basic characteristics of urban agglomerations are outlined,including the number of cities,the size of cities and the functions of urban centers.These characteristics are examined by using statistical methods and Geographic Information System（GIS）.The main findings from this research are that the development stages and structures of urban agglomerations in China vary significantly.It is also clear that the stages and evolution of spatial patterns are strongly affected and dominated by both policy and location factors.