地震氡观测仪计量检定系统与实验分析

本文介绍了地震氡观测仪计量检定系统（氡室）的建设背景及结构组成。氡室具有氡体积活度（氡浓度）实时监测、动态补氡、氡期望值可调、稳定性好等特点。在氡室调试实验中进行了氡室的漏气率实验及4次补氡实验,计算出氡室的氡漏气率为0.0001393Bq/min,氡发生率为23.35Bq/min。根据《测氡仪检定规程》（JJG 825—2013）的技术要求进行计量效能验证,表明氡室的氡体积活度（氡浓度）为800Bq/m³、1500Bq/m³、3000Bq/m³、6000Bq/m³和15000Bq/m³时,连续8h稳定性均优于5%;为6000Bq/m³时,72h稳定性优于5%,符合国家计量技术规范对氡室计量标准的要求。     

Geospatial-temporal analysis of land-use changes in the Yellow River Delta during the last 40 years

Research on land use/land cover changes (LUCC)has been the core project of the Global EnvironmentalChanges since the 1990s[1—6]. Scientists at home andabroad have been laying emphasis on integrationstudies on land-use change by “space and process”features[7—10] as researches on LUCC are in a greatdeal. It is of paramount important for us to studyLUCC at various spatial-temporal scales and build aquantitative assessment of land-use conversion by in-tegrated spatial-temporal features. …     

1624年“扬州地震”震中的新认识

公元1624年2月10日,即明代天启三年12月22日,在现今江苏省范围内发生了一次破坏性地震。在历次出版的地震目录中,扬州被确定为本次地震的震中,其主要依据为“扬州倒卸城垣三百八十余垛、城铺二十余处”的历史记述。《地震亘江南北疏》的发现为本次地震的研究提供了新的资料。本文分析已有资料的可靠性;选择相对可靠的历史资料划定Ⅵ度等烈度线;采用新划定的Ⅵ度等烈度线,按历史地震影响烈度的衰减关系确定本次地震的震级为6 1/4级;综合Ⅵ度等烈度线范围内的地震地质条件以及历史地震资料中人的感受、地表变形和各地地声方向记录,综合确定了震中位置大致在32.2°N、119.5°E,与1913年4月3日镇江5 1/2级地震(参考地名“江苏镇江”)震中相距不远。此外,本文还描述了本次地震的地震序列。     

Improved preconditioned conjugate gradient algorithm and application in 3D inversion of gravity-gradiometry data

With the continuous development of full tensor gradiometer (FTG) measurement techniques, three-dimensional (3D) inversion of FTG data is becoming increasingly used in oil and gas exploration. In the fast processing and interpretation of large-scale high-precision data, the use of the graphics processing unit process unit (GPU) and preconditioning methods are very important in the data inversion. In this paper, an improved preconditioned conjugate gradient algorithm is proposed by combining the symmetric successive over-relaxation (SSOR) technique and the incomplete Choleksy decomposition conjugate gradient algorithm (ICCG). Since preparing the preconditioner requires extra time, a parallel implement based on GPU is proposed. The improved method is then applied in the inversion of noisecontaminated synthetic data to prove its adaptability in the inversion of 3D FTG data. Results show that the parallel SSOR-ICCG algorithm based on NVIDIA Tesla C2050 GPU achieves a speedup of approximately 25 times that of a serial program using a 2.0 GHz Central Processing Unit (CPU). Real airborne gravity-gradiometry data from Vinton salt dome (southwest Louisiana, USA) are also considered. Good results are obtained, which verifies the efficiency and feasibility of the proposed parallel method in fast inversion of 3D FTG data.     

测震台网数据传输补数技术

针对测震台网波形数据传输中断导致丢数现象,开发测震台网自动补数系统SDARS,自动检测数据丢失现象,并从地震台数据采集器下载缺失数据;设计手动辅助补数工具软件SeisDataUtil,提供不同格式的地震数据文件的手动补数功能。通过此套补数系统,有效提高测震台网波形数据完整率,最小化减少波形数据丢失。     

Geomorphological site classification for the Fujian province

Geomorphological classification of the Fujian province was done based on remote-sensing imaging, digital elevation maps, and slope gradient data acquired by ArcGIS 9.2. The engineering geological units in the Fujian province were divided into five types by the geomorphologic shape and genesis. The relationship among geomorphological type, engineering geological unit, and site category was determined using engineering geological data and site category data. Then, after making a preliminary site classification adjusted by drill hole data, the site was classified into four types: I₀, I₁, II, and III according to site classification standards of equivalent shear-wave velocity and overburden thickness. The results showed that the site categories in the Fujian province mainly consist of type II, which accounts for 85.26 % of the land area. The percentage of I₀ was the smallest, which accounts for only 2.44 % of the total area.     

A large excess of 210Po in the overlying water of the Zhubi Coral Reef flat, in the South China Sea

The temporal variability of ²¹⁰Po and ²¹⁰Pb was examined in the overlying water of the Zhubi Coral Reef flat to detect nutrient-like behavior of ²¹⁰Po. Different mechanisms influencing their geochemical behaviors were observed. Excess ²¹⁰Po relative to ²¹⁰Pb revealed an additional input of ²¹⁰Po other than in situ production from ²¹⁰Pb. The ²¹⁰Po input comes from the reef flat sediment through diffusion. The diffusion contributes 62% of the total ²¹⁰Po. This diffusion of ²¹⁰Po directly highlights its nutrient-like behavior. No input, but the slight removal, of ²¹⁰Pb was observed. Fractionation factors indicate that particulate matter prefers to adsorb ²¹⁰Po rather than ²¹⁰Pb. In combination with particulate composition, ²¹⁰Po diffusion was closely related to organic matter. These results reveal that ²¹⁰Po might be a potential tracer for quantifying nutrient recycling in the Coral Reef system.     

基于Hilbert-Huang变换的地震瞬时属性提取方法及应用(英文)

希尔伯特—黄变换(Hilbert-Huang transform,HHT)是一种新的适合非平稳和非线性信号的分析方法,由于地震信号一般呈现出非平稳与非线性特性,因此HHT非常适合地震信号的分析。本文首先介绍了HHT中关于经验模态分解(Empirical Mode Decomposition,EMD)的实现过程,在此基础上分析了几种基于EMD获得本征模态函数(Intrinsic Mode Functions,IMF)来计算瞬时频率的算法,其中利用了两个采样间隔瞬时频率的平均来计算瞬时频率,较好地反映了地震信号频率成分随时间变化的特征。将该方法应用于四川东北部某地区海相碳酸盐岩地层三维地震叠后偏移数据处理,提取"三瞬"地震属性,与传统的希尔伯特变换提取的"三瞬"地震属性进行对比,结果表明基于HHT的"三瞬"地震属性结果具有更高的分辨率,IMF2的瞬时相位能够较好地刻画台地边缘生物礁相,IMF2的瞬时频率亦具有较好的分带性。将IMF2的"三瞬"地震属性与钻井等资料结合分析,能够更好地识别沉积相的分布。     

Study of a comprehensive assessment method of the environmental quality of soil in industrial and mining gathering areas

Industrial and mining activities have been recognized as major sources of heavy metal contamination in soil. Here, we developed a comprehensive assessment method for the soil environment in industrial and mining gathering areas based on the pressure–state–response model. Using this method, we assessed the environmental quality of soil in a typical industrial and mining gathering area in Tianjin City, China. The results are as follows: (1) The comprehensive environmental quality index of the soil in the study area was 0.532, which corresponds to an alert state and shows that the soil environment is generally poor. (2) The pressure, state, and response indexes were 0.609, 0.634, and 0.163, respectively, which suggests that the pressure in the soil environment of the study area is barely acceptable, and the state is merely passable. Furthermore, the response measures are not ideal. (3) The low response index scores indicate poor production processes, low pollutant treatment level, and unsatisfactory level of management by the enterprises in the study area. (4) The distribution of soil risks was found to be inseparably related to that of contamination sources and land use types. Furthermore, the distribution was uneven to a certain degree. Finally, we propose recommendations for the optimization, adjustment, and management of typical industrial and mining gathering areas with petrochemical, metallurgy, and other heavily polluting enterprises.     

Probabilistic assessment of aggregate risk for bisphenol A by integrating the currently available environmental data

Bisphenol A (BPA) is an endocrine disruptor widely used in the production of polycarbonate plastics and epoxy resins. Exposures to BPA have been associated with reproductive, developmental, and cardiovascular effects. In this study, the CalTOX model was used to assess the aggregate health risks on BPA by integrating the currently available BPA data in various environmental media in Taiwan. Local parameters such as chemical properties, local landscape data, and exposure factors were used as model inputs under the continuous source mode. A reference dose (RfD) of 50 μg/kg-day was adopted in this assessment. Monte Carlo simulation was used to simulate great variability of the environmental data. Our results show that an upper limit of 95 % confidence interval of aggregate exposures for the adults (19–64 years old) was 1.05 μg/kg-day, corresponding to a hazard index (HI) of 0.021. The chemical properties (BPA half-life in surface water), intake rates (fruit, vegetable, and fluid intake), and landscape data (average depth of surface waters and leaf wet density) are critical parameters. Finally, HI value would approach to 1 as BPA concentrations in ambient air, surface water, and sediment was greater than 20 ng/m³, 100 μg/L, and 3.3 mg/kg. The quality of the risk assessment on BPA can be further improved by reduction of uncertainty of the abovementioned critical parameters as well as considering additional BPA exposures from canned and packaged goods.