坐标转换中公共点选取对于转换精度的影响

采用7参数布尔莎模型转换GPS坐标时,由于公共点情况复杂会对坐标转换精度产生影响。本文简述了采用布尔莎模型进行坐标转换的一般过程,结合工程算例考虑了公共点分布的几种情况对坐标转换精度的影响,提出了坐标转换分区进行的思想,得到了一些有益的结论。     

中国庐山晚第四纪沉积岩系的石英形貌显微结构及环境过程

基于庐山山地晚第四纪地层典型断面的系统调查,从地层剖面层序中筛选的微粒(θ=1～3mm)石英颗粒进行环境电子显微镜观测研究,辨认出显微结构-颗粒形态-变形构造-动力化学作用等特征,运用系统过程发展中的节点事件进行层型剖面的环境响应分析,采取综合指标表征地球表层过程及环境响应情景,明确划分出四个古气候环境发展阶段,由下往上分别表现为冰期环境-间冰期环境-冰缘环境-冰后期环境,为深入研究及科学认识庐山第四纪环境演化过程及全球变化提供了新的基础依据。     

河南淅川龙山时代陶鼎炭化残留物的碳、氮稳定同位素分析

对河南淅川丹江沿岸龙山时代若干遗址出土陶鼎残片内壁残留的炭化物,开展了碳、氮稳定同位素分析,旨在揭示该类型器物所盛放或烹煮过的食物来源以及器物的用途。结果显示,δ 13 C值介于C3和C4类植物之间,表明大部分器物曾烹煮过C3和C4类食物,根据该地区当时为稻粟混作区的状况,推测稻、粟可能是食物的主要来源; 结合δ 13 C与 δ 15 N 值表明部分炭化物的生物来源包括豆科类植物、食肉类动物或鱼类资源,说明先民的蛋白质摄取来源较为丰富。因此,当时陶鼎加工的食物种类并不局限于肉类,这表明了陶鼎使用功能的广泛性以及当时人类食物来源的多样性,从而深化了对古代社会食物结构以及生存环境的认识。     

滇池流域石漠化特征分析

位于云南省会昆明盆地内的滇池流域是滇中岩溶和石漠化较为发育的地区,石漠化总面积225.56 km2,占流域总面积的7.71%,占岩溶总面积32.69%。石漠化主要分布在望海山、大板桥—呈贡、黑林铺、海口、梁王山、上蒜片区,其中又以北东部的大板桥片区石漠化最为严重。石漠化已造成流域内水土流失加剧、可耕地面积减少、土壤涵养水源能力降低及生态环境恶化等危害。通过地面调查和ETM遥感解译,查清了流域内石漠化的发育分布与碳酸盐岩的岩性及其组合、岩溶作用、地形地貌、气象等自然因素、人为因素和工业污染关系密切。针对石漠化的形成原因,提出了生态修复、农田基本建设、水资源开发利用、农村能源建设、小集镇建设、土地合理利用等治理措施。     

鄂西宁乡式铁矿分布层位岩相特征与成因探讨

鄂西宁乡式铁矿分布广、规模大,尤以普遍发育赤铁矿鲕粒而独具特色。并且它一般赋存于加里东运动后第一个海浸沉积序列中由碎屑岩向碳酸盐岩过渡的层位,岩相古地理环境有明显的控制作用。本文铁矿层中赤铁矿鲕粒类型之繁多,结构之复杂,安全可与碳酸盐鲕粒相提并论,其成因亦非常相似,均为强烈搅动环境中机械沉积的产物。经波浪和潮汐水流的再次搬运富集。最后定们于中等一弱动荡环境或相地低凹摈滨相上部。     

基于GPS基准站网的GPS测量

采用基于GPS基准网的GPS测量可以提高GPS测量的可靠性和准确性 ,可以消除和减小GPS测量观测值中与时间和空间相关的大气误差和轨道误差的影响 ,使中、长距离快速静态定位和RTK动态定位成为现实 ,还具有可直接得到WGS84Z坐标等优点。本文介绍基于GPS基准站网的GPS测量 ,简要地论述GPS虚拟参考站法VRS和区域改正数法FKP的原理、方法和特点 ,以及目前实施中存在的一些问题     

QUEST on DASI: a South Pole CMB polarization experiment

QUEST on DASI is a ground-based, high-sensitivity, high-resolution (ℓ_max2500) experiment designed to map CMB polarization at 100 and 150 GHz and to measure the power spectra from E-modes, B-modes from lensing of the CMB, and B-modes from primordial gravitational waves. The experiment comprises a 2.6 m Cassegrain optical system, equipped with an array of 62 polarization-sensitive bolometers (PSBs), located at the South Pole. The instrument is designed to minimize systematic effects; features include differencing of pairs of orthogonal PSBs within a single feed, a rotatable achromatic waveplate, and axisymmetric rotatable optics. In addition the South Pole location allows both repeatable and highly controlled observations. QUEST on DASI will commence operation in early 2005.     

Chronology and cooling history of the Tianmenshan pluton in South Jiangxi Province and their geological significance

Geochronological studies on the crust-derived Tianmenshan pluton were undertaken by SHRIMP zircon U-Pb dating and Ar-Ar dating of biotite, muscovite and K-feldspar, giving a petrogenetic age of 167 Ma. Owing to the closure systems in different minerals, the cooling history of the pluton can be determined with an age-temperature diagram. The late hydrothermal event has been recognized, which is related probably with mineralization. In terms of the comparative geochronological and petrologic records, it is concluded that there are some constrains on tectonic evolution and that the formation of the Tianmenshan pluton proceeded in a transition period from Indosinian post-orogeny extension to strong compressive tectonics. And the timing of the hydrothermal event matches the compressive climax of the Yanshanian orogeny. The temporal gap between granite emplacement and wolframite mineralization could last 10-20 Ma owing to the low cooling rate of the pluton.     

海雾生成过程中平流、湍流、辐射效应研究

推导出一个相对湿度方程,分析了在海雾生成过程中平流、湍流和辐射的效应.     

An Investigation of Digestion Methods for Trace Elements in Bauxite and Their Determination in Ten Bauxite Reference Materials Using Inductively Coupled Plasma‐Mass Spectrometry

Trace elements from samples of bauxite deposits can provide useful information relevant to the exploration of the ore‐forming process. Sample digestion is a fundamental and critical stage in the process of geochemical analysis, which enables the acquisition of accurate trace element data by ICP‐MS. However, the conventional bomb digestion method with HF/HNO₃ results in a significant loss of rare earth elements (REEs) due to the formation of insoluble AlF₃ precipitates during the digestion of bauxite samples. In this study, the digestion capability of the following methods was investigated: (a) ‘Mg‐addition’ bomb digestion, (b) NH₄HF₂ open vessel digestion and (c) NH₄F open vessel digestion. ‘Mg‐addition’ bomb digestion can effectively suppress the formation of AlF₃ and simultaneously ensure the complete decomposition of resistant minerals in bauxite samples. The addition of MgO to the bauxite samples resulted in (Mg + Ca)/Al ratios ≥ 1. However, adding a large amount of MgO leads to significant blank contamination for some transition elements (V, Cr, Ni and Zn). The NH₄HF₂ or NH₄F open vessel digestion methods can also completely digest resistant minerals in bauxite samples in a short period of time (5 hr). Unlike conventional bomb digestion with HF/HNO₃, the white precipitates and the semi‐transparent gels present in the NH₄HF₂ and NH₄F digestion methods could be efficiently dissolved by evaporation with HClO₄. Based on these three optimised digestion methods, thirty‐seven trace elements including REEs in ten bauxite reference materials (RMs) were determined by ICP‐MS. The data obtained showed excellent inter‐method reproducibility (agreement within 5% for REEs). The relative standard deviation (% RSD) for most elements was < 6%. The concentrations of trace elements in the ten bauxite RMs showed agreement with the limited certified (Li, V, Cr, Cu, Zn, Ga, Sr, Zr and Pb) and information values (Co, Ba, Ce and Hf) available. New trace element data for the ten RMs are provided, some of which for the first time.