Analysis of reservoir water quality using fuzzy synthetic evaluation

A general methodology for fuzzy synthetic evaluation is developed and illustrated with a case study of trophic status assessment for Fei-Tsui Reservoir in Taiwan. The historical data base was collected from the management agency of Fei-Tsui Reservoir from 1987 to 1996. In fuzzy synthetic evaluation, the classification is determined by a matrix operation of the weighted vector with the fuzzy evaluation matrix. After all individual membership functions of evaluated factors have been determined, the fuzzy evaluation matrix can be established. The weighted vector is determined by the analytic hierarchy process method (AHP). The results of this investigation show that the long-term change of water quality and the overturn phenomena cannot be observed with the Carlson index from 1987 to 1992 but is expressed by fuzzy synthetic evaluation. Fuzzy synthetic evaluation is better suited than the Carlson index to rating the trophic status of self-sustaining lakes. Interpretation of the results can provide valuable information to decision makers and aid reservoir management.     

Mechanisms controlling the temporal variation of the sea ice edge in the Southern Ocean

This paper examines the mechanism controlling the short time-scale variation of sea ice cover over the Southern Ocean. Sea ice concentration and ice velocity datasets derived from images of the Defense Meteorological Satellite Program (DMSP) Special Sensor Microwave Imager (SSM/I) are employed to reveal this mechanism. The contribution of both dynamic and thermodynamic processes to the change in ice edge location is examined by comparing the meridional velocity of ice edge displacement and sea ice drift. In the winter expansion phase, the thermodynamic process of new ice production off the ice edge plays an important role in daily advances of ice cover, whereas daily retreats are mostly due to southward ice drift. On the other hand, both advance and retreat of ice edges in the spring contraction phase are mostly caused by the dynamic process of the ice drift. Based on the above mechanism and the linear relation between the degree of ice production at the ice edge and northward wind speed, the seasonal advance of ice cover can be roughly reproduced using the meridional velocity of ice drift at the ice edge.     

Remote Sensing of Eupatorium Adenophorum Spreng Based on HJ-A Satellite Data

In the southwest of China, one of the greatest threats to local ecosystem is the area expansion of an invasive species, i.e., Eupatorium adenophorum Spreng (EAS). In this study, the remote-sensing technology was used to detect and map the spatial distribution of EAS in Guizhou Province, China. A series of vegetation indices, including normalized difference vegetation index (NDVI), simple ratio index (SRI) and atmospherically resistant vegetation index (ARVI), were used to identify EAS from HJ-A Chninese satellite data. According to the analysis results of fieldworks from March 21 to 22, 2009, it was found that the vegetation index of {1.9589 ≤ SRI ≤ 4.1095}∩{0.2359 ≤ ARVI ≤ 0.5193} was the optimal remote-sensing parameter for identifying EAS from HJ-A data. According to the spatial distribution of EAS estimated from HJ-A data, it was found that EAS was rather more in southwest of Guizhou Province than in northeast. EAS became sparse from southwest to northeast gradually, and the central Guizhou Province was the ecological corridor linking EAS in southwest to that in northeast. By comparison with validated data collected by the government of Guizhou Province, it was found that the uncertainty of remote-sensing method was 18.52%, 29.31%, 8.77% and 9.46% in grassland, forest, farmland and others respectively, and the mean uncertainty was 13.29%. Owing to the lower height of EAS than many plants in forest, the uncertainty of EAS was the greatest in forest than that in grassland, farmland and so on.     

Smithsonian Institution’s Global Volcanism Network

Information included in this summary is based on more detailed reports published in the Bulletin of the Global Volcanism Network, vol. 31, no. 4, April 2006 (on the Internet at ). Edited by scientists at the Smithsonian, this bulletin includes reports provided by a worldwide network of correspondents. The reports contain the names and contact information for all sources. Please note that these reports are preliminary and subject to change as events are studied in more detail. The Global Volcanism Program welcomes further reports of current volcanism, seismic unrest, monitoring data, and field observations.     

A simplified analytical model for run-out prediction of flow slides in municipal solid waste landfills

Flow slides in municipal solid waste (MSW) landfills are common geoenvironmental issues in the urban environment and can pose a serious threat to the surrounding population and infrastructure. Prediction of the maximum run-out distance of flow slides in MSW landfills is therefore an essential part of hazard and risk assessment in engineering design. Based on the framework for simple analysis originally developed by Hungr (1995), we propose a simplified analytical model for calculating dam breaks in a plastic fluid along a single inclined base. In the proposed model, a quarter-elliptical shape is used to describe the approximate configuration of the flow slide. Following this step, the physical laws relating to the conservation of mass and energy are used to calculate the potential flow. Of additional note is a boundary condition in mathematics relating to this simplified analytical model, which is also reported in this study. Taking the obvious mobility characteristics of the MSW at point of failure into consideration, a three-phase simplified model along double inclined bases has been further developed for run-out prediction of the flow slide in MSW landfill. The proposed three-phase model is then applied to estimate the maximum run-out distance of two typical flow failures of landfills located in Sarajevo and Bandung, which demonstrate the capability of the proposed simplified analytical model for use in hazard assessments of landfills.     

An analytical method to compute comet cloud formation efficiency and its application

A quick analytical method is presented for calculating comet cloud formation efficiency in the case of a single planet or multiple-planet system for planets that are not too eccentric (e _p ≲ 0.3). A method to calculate the fraction of comets that stay under the control of each planet is also presented, as well as a way to determine the efficiency in different star cluster environments. The location of the planet(s) in mass-semi-major axis space to form a comet cloud is constrained based on the conditions developed by Tremaine (1993) together with estimates of the likelyhood of passing comets between planets; and, in the case of a single, eccentric planet, the additional constraint that it is, by itself, able to accelerate material to relative encounter velocity U ~ 0.4 within the age of the stellar system without sweeping up the majority of the material beforehand. For a single planet, it turns out the efficiency is mainly a function of planetary mass and semi-major axis of the planet and density of the stellar environment. The theory has been applied to some extrasolar systems and compared to numerical simulations for both these systems and the Solar System, as well as a diffusion scheme based on the energy kick distribution of Everhart (Astron J 73:1039–1052, 1968). The analytic results are in good agreement with the simulations.     

Comparison of daily and sub-daily SWAT models for daily streamflow simulation in the Upper Huai River Basin of China

Despite the significant role of precipitation in the hydrological cycle, few studies have been conducted to evaluate the impacts of the temporal resolution of rainfall inputs on the performance of SWAT (soil and water assessment tool) models in large-sized river basins. In this study, both daily and hourly rainfall observations at 28 rainfall stations were used as inputs to SWAT for daily streamflow simulation in the Upper Huai River Basin. Study results have demonstrated that the SWAT model with hourly rainfall inputs performed better than the model with daily rainfall inputs in daily streamflow simulation, primarily due to its better capability of simulating peak flows during the flood season. The sub-daily SWAT model estimated that 58 % of streamflow was contributed by baseflow compared to 34 % estimated by the daily model. Using the future daily and 3-h precipitation projections under the RCP (Representative Concentration Pathways) 4.5 scenario as inputs, the sub-daily SWAT model predicted a larger amount of monthly maximum daily flow during the wet years than the daily model. The differences between the daily and sub-daily SWAT model simulation results indicated that temporal rainfall resolution could have much impact on the simulation of hydrological process, streamflow, and consequently pollutant transport by SWAT models. There is an imperative need for more studies to examine the effects of temporal rainfall resolution on the simulation of hydrological and water pollutant transport processes by SWAT in river basins of different environmental conditions.     

Dynamic Analysis of a Single-Column Platform (II)

This paper describes the study of a single-column structure used as well-head platform. In order to check the reliability of computation theory and programme, model tests have been carried out. The paper introduces the conclusion of tests and the dynamic properties of single-column platform are obtained.     

Simplified formulae for designing coastal forest against tsunami run-up: one-dimensional approach

In the present study, laboratory experiments were conducted to validate the applicability of a numerical model based on one-dimensional nonlinear long-wave equations. The model includes drag and inertia resistance of trees to tsunami flow and porosity between trees and a simplified forest in a wave channel. It was confirmed that the water surface elevation and flow velocity by the numerical simulations agree well with the experimental results for various forest conditions of width and tree density. Further, the numerical model was applied to prototype conditions of a coastal forest of Pandanus odoratissimus to investigate the effects of forest conditions (width and tree density) and incident tsunami conditions (period and height) on run-up height and potential tsunami force. The modeling results were represented in curve-fit equations with the aim of providing simplified formulae for designing coastal forest against tsunamis. The run-up height and potential tsunami forces calculated by the curve-fit formulae and the numerical model agreed within ± 10% error.     

3D-Monitoring Big Geo Data on a seaport infrastructure based on FIWARE

Many organizations of all kinds are using new technologies to assist the acquisition and analysis of data. Seaports are a good example of this trend. Seaports generate data regarding the management of marine traffic and other elements, as well as environmental conditions given by meteorological sensors and buoys. However, this enormous amount of data, also known as Big Data, is useless without a proper system to organize, analyze and visualize it. SmartPort is an online platform for the visualization and management of a seaport data that has been built as a GIS application. This work offers a Rich Internet Application that allows the user to visualize and manage the different sources of information produced in a port environment. The Big Data management is based on the FIWARE platform, as well as “The Internet of Things” solutions for the data acquisition. At the same time, Glob3 Mobile (G3M) framework has been used for the development of map requirements. In this way, SmartPort supports 3D visualization of the ports scenery and its data sources.