Maximum mass of a hot neutron star with a quark core

We have considered a hot neutron star with a quark core,a mixed phase of quark-hadron matter,and a hadronic matter crust and have determined the equation of state of the hadronic phase and the quark phase.We have then found the equation of state of the mixed phase under the Gibbs conditions.Finally,we have computed the structure of a hot neutron star with a quark core and compared our results with those of the neutron star without a quark core.For the quark matter calculations,we have used the MIT bag model...     

Apportioning deformation among depth intervals in an aquifer system using InSAR and head data

Land surface subsidence due to excessive groundwater pumping is an increasing concern in California, USA. Interferometric Synthetic Aperture Radar (InSAR) is a remote sensing technique for measuring centimeter-to-millimeter surface deformation at 10–100 m spatial resolution. Here, a data-driven approach that attributes deformation to individual depth intervals within an aquifer system by integrating head data acquired from each of three screened intervals in a monitoring well with InSAR surface deformation measurements was developed. The study area was the Colusa Basin in northern Central Valley. To reconstruct the surface deformation history over the study area, 13 ALOS-PALSAR scenes acquired between 2006 and 2010 were processed. Up to ~3-cm year^?1 long-term subsidence and up to ~6 cm seasonal subsidence were observed using the InSAR technique. The technique developed in this paper integrates the InSAR-observed seasonal deformation rate and the co-located head measurements in multiple depth intervals to estimate the elastic skeletal storage coefficient, the time delay between the head change and the observed deformation, and subsequently the deformation of each depth interval. This technique can be implemented when hydraulic head measurements within each depth interval are not correlated with each other. Using this approach, the depth interval that contributed the most to the total subsidence, as well as storage parameters for all intervals, are estimated. The technique can be used for identification of the depth interval within the aquifer system responsible for deformation.

     

Reconstruction management policies in residential and commercial sectors after the 2003 bam earthquake in Iran

In the very early hours of 26th December 2003, a devastating and strong earthquake with a magnitude of 6.5 struck Bam, one of the historical cities of Kerman province in the south of Iran. According to the official reports, more than 30,000 were killed and about 25,000 injured. More than 80% of the town’s buildings were also destroyed. After the disaster, Bam’s reconstruction management process was presented with a lot of challenges and faced many fundamental questions. The number of human losses and related social issues, extensive destruction of the historical town, and also the lack of good experience in the reconstruction of a city or town made the reconstruction project of Bam more complicated. The reconstruction of Bam was the most important post-disaster reconstruction project among recent reconstructions in Iran. Many factors, such as concern over the government and international agencies, the new managerial approaches, and the application of appropriate reconstruction methods, made it different from the other reconstruction programs. Thus, the post-earthquake reconstruction of Bam is investigated in this research with respect to the importance of this issue. The aim behind this article is to give a brief explanation of the earthquake reconstruction management policies in Bam and also the plans for the reconstruction and rebuilding of urban residential and commercial units.     

Comparison of classification and clustering methods in spatial rainfall pattern recognition at Northern Iran

Pattern recognition is the science of data structure and its classification. There are many classification and clustering methods prevalent in pattern recognition area. In this research, rainfall data in a region in Northern Iran are classified with natural breaks classification method and with a revised fuzzy c-means (FCM) algorithm as a clustering approach. To compare these two methods, the results of the FCM method are hardened. Comparison proved overall coincidence of natural breaks classification and FCM clustering methods. The differences arise from nature of these two methods. In the FCM, the boundaries between adjacent clusters are not sharp while they are abrupt in natural breaks method. The sensitivity of both methods with respect to rain gauge density was also analyzed. For each rain gauge density, percentage of boundary region and hardening error are at a minimum in the first cluster while the second cluster has the maximum error. Moreover, the number of clusters was sensitive to the number of stations. Since the optimum number of classes is not apparent in the classification methods and the boundary between adjacent classes is abrupt, use of clustering methods such as the FCM method, overcome such deficiencies. The methods were also applied for mapping an aridity index in the study region where the results revealed good coincidence between the FCM clustering and natural breaks classification methods.     

Hybrid-Empirical Ground Motion Estimations for Georgia

Ground motion prediction equations are essential for several purposes ranging from seismic design and analysis to probabilistic seismic hazard assessment. In seismically active regions without sufficiently strong ground motion data to build empirical models, hybrid models become vital. Georgia does not have sufficiently strong ground motion data to build empirical models. In this study, we have applied the host-totarget method in two regions in Georgia with different source mechanisms. According to the tectonic regime of the target areas, two different regions are chosen as host regions. One of them is in Turkey with the dominant strike-slip source mechanism, while the other is in Iran with the prevalence of reverse-mechanism events. We performed stochastic finite-fault simulations in both host and target areas and employed the hybrid-empirical method as introduced in Campbell (2003). An initial set of hybrid empirical ground motion estimates is obtained for PGA and SA at selected periods for Georgia.     

Clear-water scour around semi-elliptical abutments with armored beds

Experimental study has been carried out under a clear-water scour condition to explore the local scour around semi-elliptical model bridge abutments with armor-layer bed, compared with the local scour process around semi-circular abutment. Two types of model bridge abutments, namely semi-elliptical and semi-circular abutments have been used in this experimental study. The model abutments had a ratio of streamwise length of abutment to the length of abutment transverse to the flow of 2 for semi-circular abutments and 3 for semi-elliptical abutments. In total, 50 Experiments have been designed and conducted under different flow conditions such as bed shear velocities, flow depth, and dimensions of bridge abutment model, as well as grain size of the bed material. Based on these experiments, the scour process around bridge abutments has been assessed. The dependence of the equilibrium scour depth of the scour hole on hydraulic variables has been studied. Empirical equation describing the equilibrium scour depth of the scour hole around bridge abutments has been developed.     

The crystalline complexes of Hamadan (Sanandaj–Sirjan zone, western Iran): metasedimentary Mesozoic sequences affected by Late Cretaceous tectono-metamorphic and plutonic events

The Hamadan area is characterised by various metamorphic rocks where the slates yielded Jurassic fossils. The entire column, representing the Mesozoic from at least the Jurassic to the Mid-Cretaceous, has been affected by tectono-metamorphic events and the emplacement of Late Cretaceous granitic rocks. A timing of these events is based on the ⁴⁰K–⁴⁰Ar ages carried mainly on separated amphiboles, biotites and muscovites, and interpreted as the ages of their isotopic closure. Results are ranging between 91 and 70 Ma. To cite this article: A. Baharifar et al., C. R. Geoscience 336 (2004).

Résumé

La région de Hamadan expose des roches métamorphiques dont les termes les moins transformés contiennent des fossiles jurassiques. Au cours du Crétacé supérieur, elle a été affectée par un événement tectono-métamorphique régional et elle a été le siège d'une activité plutonique. Les résultats des datations ⁴⁰K–⁴⁰Ar des amphiboles et des micas séparés des roches métamorphiques et plutoniques qui s'étagent entre 91 et 70 Ma montrent l'importance de ces événements et leur étalement au cours du Crétacé supérieur. Pour citer cet article : A. Baharifar et al., C. R. Geoscience 336 (2004).     

Land use and land cover classification over a large area in Iran based on single date analysis of satellite imagery

Accelerated soil erosion, high sediment yields, floods and debris flow are serious problems in many areas of Iran, and in particular in the Golestan dam watershed, which is the area that was investigated in this study. Accurate land use and land cover (LULC) maps can be effective tools to help soil erosion control efforts. The principal objective of this research was to propose a new protocol for LULC classification for large areas based on readily available ancillary information and analysis of three single date Landsat ETM+ images, and to demonstrate that successful mapping depends on more than just analysis of reflectance values. In this research, it was found that incorporating climatic and topographic conditions helped delineate what was otherwise overlapping information. This study determined that a late summer Landsat ETM+ image yields the best results with an overall accuracy of 95%, while a spring image yields the poorest accuracy (82%). A summer image yields an intermediate accuracy of 92%. In future studies where funding is limited to obtaining one image, late summer images would be most suitable for LULC mapping. The analysis as presented in this paper could also be done with satellite images taken at different times of the season. It may be, particularly for other climatic zones, that there is a better time of season for image acquisition that would present more information.     

Experimental and Numerical Investigation of the Flow Hydraulic in Gradual Transition Open Channels

Channel expansions are common in both natural and artificial open channels. With increasing cross-sectional dimensions in an expansion, the flow decelerates. Due to separation of flow and subsequent eddy formation, a significant head loss is occurred along the transition. This study presents the results of experimental investigations on subcritical flow along the expansive transition of rectangular to trapezoidal channels. Also, a numerical simulation was developed using the finite volume method with Reynolds Stress turbulent model. Water surface profiles and velocity distributions of flow through the transition were measured experimentally and compared with the numerical results. Also, hydraulic efficiency of the transition and coefficient of energy head loss were calculated. The results show that with increasing the upstream Froude number, hydraulic efficiency of the transition and coefficient of energy head loss are decreased and increased, respectively. The results also showed the ability of numerical simulation for simulating the flow separation zones and bed shear stress along the transition for different inlet discharges and inflow Froude numbers.